Correction to: Bone Marrow Derived Pluripotent Cells are Pericytes which Contribute to Vascularization.

Please note the following errors in the original version.

In vivo response to decellularized mesothelium scaffolds.

Biological surgical scaffolds are used in plastic and reconstructive surgery to support structural reinforcement and regeneration of soft tissue defects. Macrophage and fibroblast cell populations heavily regulate scaffold integration into host tissue following implantation. In the present study, the biological host response to a commercially available surgical scaffold (Meso BioMatrix Surgical Mesh (MBM)) was investigated for up to 9 weeks after subcutaneous implantation; this scaffold promoted superior cell migration and infiltration previously in in vitro studies relative to other commercially available scaffolds.

A bilayer small diameter vascular model for evaluation of drug induced vascular injury.

In pre-clinical safety studies, drug-induced vascular injury (DIVI) is defined as an adverse response to a drug characterized by degenerative and hyperplastic changes of endothelial cells and vascular smooth muscle cells. Inflammation may also be seen, along with extravasation of red blood cells into the smooth muscle layer (i.e.

Chondrogenesis by bone marrow-derived mesenchymal stem cells grown in chondrocyte-conditioned medium for auricular reconstruction.

Bone marrow-derived mesenchymal stem cells (BMSCs) can be obtained by minimally invasive means and would be a favourable source for cell-based cartilage regeneration. However, controlling the differentiation of the BMSCs towards the desired chondrogenic pathway has been a challenge hampering their application. The major aim of the present study was to determine if conditioned medium collected from cultured auricular chondrocytes could promote chondrogenic differentiation of BMSCs.

In vitro evaluation of decellularized ECM-derived surgical scaffold biomaterials.

Decellularized extracellular matrix (ECM) biomaterials are increasingly used in regenerative medicine for abdominal tissue repair. Emerging ECM biomaterials with greater compliance target surgical procedures like breast and craniofacial reconstruction to enhance aesthetic outcome. Clinical studies report improved outcomes with newly designed ECM scaffolds, but their comparative biological characteristics have received less attention.

Ear-Shaped Stable Auricular Cartilage Engineered from Extensively Expanded Chondrocytes in an Immunocompetent Experimental Animal Model.

Advancement of engineered ear in clinical practice is limited by several challenges. The complex, largely unsupported, three-dimensional auricular neocartilage structure is difficult to maintain. Neocartilage formation is challenging in an immunocompetent host due to active inflammatory and immunological responses.

Extensively Expanded Auricular Chondrocytes Form Neocartilage In Vivo.

Objective: Our goal was to engineer cartilage in vivo using auricular chondrocytes that underwent clinically relevant expansion and using methodologies that could be easily translated into health care practice.

Design: Sheep and human chondrocytes were isolated from auricular cartilage biopsies and expanded in vitro. To reverse dedifferentiation, expanded cells were either mixed with cryopreserved P0 chondrocytes at the time of seeding onto porous collagen scaffolds or proliferated with basic fibroblast growth factor (bFGF).

Conditions for seeding and promoting neo-auricular cartilage formation in a fibrous collagen scaffold.

Background: Carved autologous costal cartilage and porous polyethylene implants (Medpor) are the most common approaches for total ear reconstruction, but these approaches may have inconsistent cosmetic outcomes, a high risk of extrusion, or other surgical complications. Engineering ear cartilage to emulate native auricular tissue is an appealing approach, but often the cell-seeded scaffolds are susceptible to shrinkage and architectural changes when placed in vivo. The aim of this study was to assess the most favorable conditions for in vitro pre-culture of cell-seeded type I collagen scaffolds prior to in vivo implantation.

Ovine model for auricular reconstruction: porous polyethylene implants.

Objectives: We developed a large animal model for auricular reconstruction with engineered cartilage frameworks and evaluated the performance of porous polyethylene auricular implants in this model.

Methods: Eighteen high-density porous polyethylene auricular frameworks were implanted subcutaneously in the infra-auricular areas of 9 sheep. The implants were harvested 17 weeks later for gross and histologic examination.

Combined surface micropatterning and reactive chemistry maximizes tissue adhesion with minimal inflammation.

The use of tissue adhesives for internal clinical applications is limited due to a lack of materials that balance strong adhesion with biocompatibility. The use of substrate topography is explored to reduce the volume of a highly reactive and toxic glue without compromising adhesive strength. Micro-textured patches coated with a thin layer of cyanoacrylate glue achieve similar adhesion levels to patches employing large amounts of adhesive, and is superior to the level of adhesion achieved when a thin coating is applied to a non-textured patch.

Successful creation of tissue-engineered autologous auricular cartilage in an immunocompetent large animal model.

Tissue-engineered cartilage has historically been an attractive alternative treatment option for auricular reconstruction. However, the ability to reliably generate autologous auricular neocartilage in an immunocompetent preclinical model should first be established. The objectives of this study were to demonstrate engineered autologous auricular cartilage in the immunologically aggressive subcutaneous environment of an immunocompetent animal model, and to determine the impact of in vitro culture duration of chondrocyte-seeded constructs on the quality of neocartilage maturation in vivo.

Design of composite scaffolds and three-dimensional shape analysis for tissue-engineered ear.

Engineered cartilage is a promising option for auricular reconstruction. We have previously demonstrated that a titanium wire framework within a composite collagen ear-shaped scaffold helped to maintain the gross dimensions of the engineered ear after implantation, resisting the deformation forces encountered during neocartilage maturation and wound healing. The ear geometry was redesigned to achieve a more accurate aesthetic result when implanted subcutaneously in a nude rat model.

A novel tissue engineering approach using an endothelial progenitor cell-seeded biopolymer to treat intracranial saccular aneurysms.

Object: Recurrence after endovascular coiling of intracranial aneurysms is reported in up to 42% of cases and is attributed to the lack of endothelialization across the neck. In this study the authors used a novel tissue engineering approach to promote endothelialization by seeding endothelial progenitor cells (EPCs) within a fibrin polymer injected endovascularly into the aneurysm.

Methods: Experimental aneurysms were created in New Zealand White rabbits and were left untreated, surgically clipped, or embolized with platinum coils, fibrin biopolymer alone, or fibrin combined with autologous cultured EPCs.

The tissue-engineered auricle: past, present, and future.

The reconstruction, repair, and regeneration of the external auricular framework continue to be one of the greatest challenges in the field of tissue engineering. To replace like with like, we should emulate the native structure and composition of auricular cartilage by combining a suitable chondrogenic cell source with an appropriate scaffold under optimal in vitro and in vivo conditions. Due to the fact that a suitable and reliable substitute for auricular cartilage has yet to be engineered, hand-carved autologous costal cartilage grafts and ear-shaped porous polyethylene implants are the current treatment modalities for auricular reconstruction.

Engineering ear constructs with a composite scaffold to maintain dimensions.

Engineered cartilage composed of a patient's own cells can become a feasible option for auricular reconstruction. However, distortion and shrinkage of ear-shaped constructs during scaffold degradation and neocartilage maturation in vivo have hindered the field. Scaffolds made of synthetic polymers often generate degradation products that cause an inflammatory reaction and negatively affect neocartilage formation in vivo.

Regeneration and orthotopic transplantation of a bioartificial lung.

About 2,000 patients now await a donor lung in the United States. Worldwide, 50 million individuals are living with end-stage lung disease. Creation of a bioartificial lung requires engineering of viable lung architecture enabling ventilation, perfusion and gas exchange.

Mechanical dissociation of swine liver to produce organoid units for tissue engineering and in vitro disease modeling.

The complex intricate architecture of the liver is crucial to hepatic function. Standard protocols used for enzymatic digestion to isolate hepatocytes destroy tissue structure and result in significant loss of synthetic, metabolic, and detoxification processes. We describe a process using mechanical dissociation to generate hepatic organoids with preserved intrinsic tissue architecture from swine liver.

Engineered vascularized bone grafts.

Clinical protocols utilize bone marrow to seed synthetic and decellularized allogeneic bone grafts for enhancement of scaffold remodeling and fusion. Marrow-derived cytokines induce host neovascularization at the graft surface, but hypoxic conditions cause cell death at the core. Addition of cellular components that generate an extensive primitive plexus-like vascular network that would perfuse the entire scaffold upon anastomosis could potentially yield significantly higher-quality grafts.

Bone marrow derived pluripotent cells are pericytes which contribute to vascularization.

Pericytes are essential to vascularization, but the purification and characterization of pericytes remain unclear. Smooth muscle actin alpha (alpha-SMA) is one marker [corrected] of pericytes. The aim of this study is to purify the alpha-SMA positive cells from bone marrow and study the characteristics of these cells and the interaction between alpha-SMA positive cells and endothelial cells.

In vivo myocardial distribution of multipotent progenitor cells following intracoronary delivery in a swine model of myocardial infarction.

Aims: There are few data comparing the fate of multipotent progenitor cells (MPCs) used in cardiac cell therapy after myocardial infarction (MI). To document in vivo distribution of MPCs delivered by intracoronary (IC) injection.

Methods And Results: Using an anterior MI swine model, near-infrared (NIR) fluorescence was used for in vivo tracking of labelled MPCs [mesenchymal stromal (MSCs), bone marrow mononuclear (BMMNCs), and peripheral blood mononuclear (PBMNCs)] cells early after IC injection.

Degradation behavior of poly(glycerol sebacate).

Poly(glycerol sebacate) (PGS), a promising scaffold material for soft tissue engineering applications, is a soft, tough elastomer with excellent biocompatibility. However, the rapid in vivo degradation rate of PGS limits its use as a scaffold material. To determine the impact of crosslink density on degradation rate, a family of PGS materials was synthesized by incrementally increasing the curing time from 42 to 144 h, at 120 degrees C and 10 mTorr vacuum.

A biodegradable and biocompatible gecko-inspired tissue adhesive.

There is a significant medical need for tough biodegradable polymer adhesives that can adapt to or recover from various mechanical deformations while remaining strongly attached to the underlying tissue. We approached this problem by using a polymer poly(glycerol-co-sebacate acrylate) and modifying the surface to mimic the nanotopography of gecko feet, which allows attachment to vertical surfaces. Translation of existing gecko-inspired adhesives for medical applications is complex, as multiple parameters must be optimized, including: biocompatibility, biodegradation, strong adhesive tissue bonding, as well as compliance and conformability to tissue surfaces.

Comparison of hydrogels in the in vivo formation of tissue-engineered bone using mesenchymal stem cells and beta-tricalcium phosphate.

Availability of grafts and morbidity at the donor site limit autologous transplantation in patients requiring bone reconstruction. A tissue-engineering approach can overcome these limitations by producing bone-like tissue of custom shape and size from isolated cells. Several hydrogels facilitate osteogenesis on porous scaffolds; however, the relative suitability of various hydrogels has not been rigorously assessed.

Hydrogel-beta-TCP scaffolds and stem cells for tissue engineering bone.

Trabecular bone is a material of choice for reconstruction after trauma and tumor resection and for correction of congenital defects. Autologous bone grafts are available in limited shapes and sizes; significant donor site morbidity is another major disadvantage to this approach. To overcome these limitations, we used a tissue engineering approach to create bone replacements in vitro, combining bone-marrow-derived differentiated mesenchymal stem cells (MSCs) suspended in hydrogels and 3-dimensionally printed (3DP) porous scaffolds made of beta-tricalcium-phosphate (beta-TCP).