Effect of Fluoride Coatings on the Corrosion Behavior of Mg-Zn-Ca-Mn Alloys for Medical Application.

The most critical shortcoming of magnesium alloys from the point of view of medical devices is the high corrosion rate, which is not well-correlated with clinical needs. It is well- known that rapid degradation occurs when an implant made of Mg-based alloys is placed inside the human body. Consequently, the implant loses its mechanical properties and failure can occur even if it is not completely degraded.

End-of-Life Materials Used as Supplementary Cementitious Materials in the Concrete Industry.

A sustainable solution for the global construction industry can be partial substitution of Ordinary Portland Cement (OPC) by use of supplementary cementitious materials (SCMs) sourced from industrial end-of-life (EOL) products that contain calcareous, siliceous and aluminous materials. Candidate EOL materials include fly ash (FA), silica fume (SF), natural pozzolanic materials like sugarcane bagasse ash (SBA), palm oil fuel ash (POFA), rice husk ash (RHA), mine tailings, marble dust, construction and demolition debris (CDD). Studies have revealed these materials to be cementitious and/or pozzolanic in nature.

Mg-Zn alloys, most suitable for biomedical applications.

In this review are highlighted the corrosion and biocompatibility of biodegradable Mg alloys for their use in orthopedic applications. It was revealed that mixing with alloying elements, such as Mn and Zn, provides improved corrosion resistance to Mg alloys; this pursuit is built on the fact that Mg and its alloys are degradable through their time in the human body. Furthermore, Mg alloys afford a characteristic profile that is very close or even almost identical to that of human bone.