A conductive nanocomposite consisting of heparin-stabilized gold nanoparticles embedded in graphene was prepared and characterized to develop an electrochemical sensor for the determination of esculetin in tea and jam samples. The gold nanoparticles were characterized by spectroscopic and microscopic techniques. The different proportions of graphene in the nanocomposite were evaluated and characterized by electrochemical practices.
View Article and Find Full Text PDFBiosensors (Basel)
December 2023
Butylated hydroxyanisole (BHA) is a synthetic phenolic antioxidant widely used in various food matrices to prevent oxidative rancidity. However, its presence has been associated with liver damage and carcinogenesis in animals. Thus, an electrochemical sensor was built using a composite of gold nanoparticles synthesized in peach extract ( (L.
View Article and Find Full Text PDFJ Pharm Biomed Anal
November 2023
In this study, a selective and sensitive electrochemical approach for determining hydroxychloroquine (HCQ) was proposed. A novel nanocomposite based on gold nanoparticles synthesized by green synthesis in an extract of white pitaya (Hylocereus undatus) (AuNP-Ext) decorated with functionalized multi-walled carbon nanotubes (f-MWCNTs) was presented. AuNP-Ext was characterized by ultraviolet-visible spectroscopy and the f-MWCNTs/AuNP-Ext nanocomposite by transmission electron microscopy.
View Article and Find Full Text PDFThe monitoring of endocrine disruptors in the environment is one of the main strategies in the investigation of potential risks associated with exposure to these chemicals. Bisphenol A is one of the most prevalent endocrine-disrupting compounds and is prone to leaching out from polycarbonate plastic in both freshwater and marine environments. Additionally, microplastics also can leach out bisphenol A during their fragmentation in the water environment.
View Article and Find Full Text PDFA ratiometric electrochemical sensor based on a carbon paste electrode modified with quinazoline-engineered ZnFe Prussian blue analogue (PBA-qnz) was developed for the determination of herbicide butralin. The PBA-qnz was synthesized by mixing an excess aqueous solution of zinc chloride with an aqueous solution of precursor sodium pentacyanido(quinazoline)ferrate. The PBA-qnz was characterized by spectroscopic and electrochemical techniques.
View Article and Find Full Text PDFAccording to the World Health Organization (WHO), cardiovascular diseases (CVDs) are the leading cause of mortality and morbidity worldwide. The development of electrochemical biosensors for CVD markers detection, such as cardiac troponin I (cTnI), becomes an important diagnostic strategy. Thus, a glassy carbon electrode (GCE) was modified with columnar liquid crystal (LC) and gold nanoparticles stabilized in polyallylamine hydrochloride (AuNPs-PAH), and the surface was employed to evaluate the interaction of the cTnI antibody (anti-cTnI) and cTnI for detection in blood plasma.
View Article and Find Full Text PDFBreast cancer (BC) is the second most cause of central nervous system (CNS) metastases. Studies report that almost one third of patients (pts) with triple-negative, one-third with human epidermal growth factor receptor 2 (HER2)-positive and 15% of those with hormone receptor-positive, HER2-negative metastatic breast cancer will develop brain metastases. It is known that the development of symptomatic brain metastases in women with advanced breast cancer is associated with poor prognosis, irrespective of local and systemic treatments.
View Article and Find Full Text PDFAn electrochemical immunosensor based on a nanohybrid film of carboxylated polypyrrole and amine nanoclay was developed for label-free detection of the human cardiac troponin T (cTnT). The nanohybrid film was formed in situ on the surface of the glassy carbon electrode, followed by the covalent immobilization of anti-troponin T antibodies by glutaraldehyde. Morphological and chemical characterizations of the nanohybrid film were performed by scanning electron microscopy and Fourier-transform infrared spectroscopy.
View Article and Find Full Text PDFThe biosynthesis of nanometals using a plant extract is simple, efficient, fast, cost-effective and eco-friendly. In this study, a pine nut extract (Araucaria angustifolia) was obtained and used as a reducing and stabilizing agent in the synthesis of silver nanoparticles. An electrochemical sensor based on the silver nanoparticles obtained and exfoliated graphite nanoplatelets applied to a glassy carbon electrode was developed for the determination of paracetamol.
View Article and Find Full Text PDFThis paper describes a simple, rapid and accurate label-free immunosensor for the determination of MC-LR in water samples. The anti-MC-LR was immobilized in a hybrid nanocomposite, comprised of exfoliated graphite nanoplatelets dispersed in a suspension of silver nanoparticles (AgNP-Nafion-xGnP), by adsorption. The nanomaterial obtained was then employed to prepare an immunosensor using a glassy carbon electrode (GCE) in one-step.
View Article and Find Full Text PDFGold nanoparticles stabilized in poly(allylamine hydrochloride) (AuNP-PAH) were used as a support for the immobilization of the enzyme laccase obtained from genetically-modified microorganisms (Aspergillus oryzae) and successfully applied in the development of a new biosensor for the determination of dopamine by square-wave voltammetry. The electrochemical characterization of the biosensor was performed by cyclic voltammetry and electrochemical impedance spectroscopy and indicated that the nanomaterial used for the electrode modification facilitated the electron transfer. Under optimized conditions, the calibration curve showed a linear range for dopamine from 0.
View Article and Find Full Text PDFA label-free electrochemical immunosensor based on an ionic organic molecule ((E)-4-[(4-decyloxyphenyl)diazenyl]-1-methylpyridinium iodide) and chitosan-stabilized gold nanoparticles (CTS-AuNPs) was developed for the detection of cardiac troponin T (cTnT). The new ionic organic molecule was strategically employed as a redox probe, and CTS-AuNPs were applied as a "green" platform for the immobilization of the monoclonal anti-cTnT antibody, for the construction of the immunosensor. The characterization of the proposed immunosensor was carried out by employing cyclic and square-wave voltammetry and electron microscopy.
View Article and Find Full Text PDFA nanostructured immunosensor based on the liquid crystal (E)-1-decyl-4-[(4-decyloxyphenyl)diazenyl]pyridinium bromide (Br-Py) and gold nanoparticles supported by the water-soluble hybrid material 3-n-propyl-4-picolinium silsesquioxane chloride (AuNP-Si4Pic(+)Cl(-)) was built for the detection of troponin T (cTnT), a cardiac marker for acute myocardial infarction (AMI). The functionalized nanostructured surface was used to bind anti-cTnT monoclonal antibodies through electrostatic interaction. The immunosensor (ab-cTnT/AuNP-Si4Pic(+)Cl(-)/Br-Py/GCE) surface was characterized by microscopy techniques.
View Article and Find Full Text PDFPt-Pd bimetallic alloy nanoparticles (NPs) dispersed in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (Pt-Pd-BMI·PF6) were employed together with a peroxidase (PO) enzyme from cauliflower immobilized on nanoclay for the development of a new biosensor for polyphenol determination by square-wave voltammetry (SWV). The biosensor demonstrated good repeatability and reproducibility, low limit of detection (LOD = 3.7 × 10(-7) mol L(-1) for caffeic acid (CA)), and adequate lifetime and stability (maintaining over 80% of the response over 80 days of evaluation, and allowing over 600 measurements by SWV for each electrode).
View Article and Find Full Text PDFA biosensor based on the iridium nanoparticles dispersed in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (Ir-BMI·PF6) and a celery (Apium graveolens) extract as a source of polyphenol oxidase (PPO) was constructed. A modified support based on β-cyclodextrin (β-CDEP) was used for enzyme immobilization. The behavior of phenolic compounds was investigated by square-wave voltammetry and rutin was selected by presenting the greatest signal.
View Article and Find Full Text PDFA bio-inspired complex, [(bpbpmp)Fe(III)(m-OAc)(2)Cu(II)](ClO(4)), was combined with a zwitterionic surfactant (ImS3-14) stabilizing pre-formed palladium nanoparticles and coated on a glassy carbon electrode (GCE). This bio-inspired surfactant film was capable of catalyzing redox reactions of dihydroxybenzenes, thus allowing the simultaneous electrochemical quantification of CC and HQ in cigarette residue samples by square-wave voltammetry (SWV). The best experimental conditions were obtained using phosphate buffer solution (0.
View Article and Find Full Text PDFHalloysite clay nanotubes were used as a support for the immobilization of the enzyme peroxidase from clover sprouts (Trifolium), and employed together with platinum nanoparticles in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Pt-BMI·PF(6)) in the development of a new biosensor for the determination of catecholamines by square-wave voltammetry. Under optimized conditions, the analytical curves showed detection limits of 0.05, 0.
View Article and Find Full Text PDFGold nanoparticles dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (Au-BMI·PF(6)) were supported in chitin (CTN) chemically crosslinked with glyoxal and epichlorohydrin to obtain a new supported ionic liquid phase (SILP) catalyst with high catalytic activity, and providing an excellent environment for enzyme immobilization. This modified biopolymer matrix (Au-BMI·PF(6)-CTN) was used as a support for the immobilization of the enzyme peroxidase (PER) from pea (Pisum sativum), and employed to develop a new biosensor for rosmarinic acid (RA) determination in pharmaceutical samples by square-wave voltammetry. In the presence of hydrogen peroxide, the PER catalyzes the oxidation of RA to the corresponding o-quinone, which is electrochemically reduced at a potential of +0.
View Article and Find Full Text PDFA material based on cellulose acetate (CA) and the room temperature ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI·N(Tf)(2)) was developed and characterized by scanning electron microscopy, electron dispersive spectroscopy and infrared analysis. Laccase (Lac) from Aspergillus oryzae was immobilized in this material to investigate the behavior of methyldopa by square-wave voltammetry. Under optimized conditions, the Lac biosensor based on CA/BMI·N(Tf)(2) exhibited an excellent electrocatalytic performance: the analytical curve showed good linear range for methyldopa concentrations from 34.
View Article and Find Full Text PDFA biosensor based on alfalfa sprout (Medicago sativa) homogenate as a source of peroxidase is proposed for the determination of thiodicarb by square-wave voltammetry. This enzyme was immobilized in self-assembled monolayers of l-cysteine on a gold electrode. Several parameters were investigated to evaluate the optimum conditions for operation of the biosensor.
View Article and Find Full Text PDFGold nanoparticles dispersed in an ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (Au-BMI.PF(6)) and a binuclear nickel(II) complex ([Ni(2)(HBPPAMFF)mu-(OAc)(2)(H(2)O)]BPh(4)) immobilized on functionalized silica were successfully applied in the construction of a novel sensor for the determination of fisetin by square-wave voltammetry. Under optimized conditions, the analytical curve showed two linear ranges for fisetin concentrations from 0.
View Article and Find Full Text PDFA boron-doped diamond (BDD) electrode was used for the electroanalytical determination of estriol hormone in a pharmaceutical product and a urine sample taken during pregnancy by square-wave voltammetry. The optimized experimental conditions were: (1) a supporting electrolyte solution of NaOH at a pH of 12.0, and (2) a frequency of 20 Hz, a pulse height of 30 mV and a scan increment of 2 mV (for the square-wave parameters).
View Article and Find Full Text PDFNovel and effective biosensors based on Ag or Au nanoparticles dispersed in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)) and laccase (Lac) from Aspergillus oryzae immobilized in chitosan (Chi) chemically cross-linked with cyanuric chloride (CC) were constructed. This enzyme catalyzes the oxidation of luteolin to the corresponding o-quinone, which is electrochemically reduced back to luteolin at 0.
View Article and Find Full Text PDFA biosensor based on the ionic liquid, 1-n-butyl-3-methylimidazolium hexafluorophosphate containing dispersed iridium nanoparticles (Ir-BMI.PF(6)) and polyphenol oxidase was constructed. This enzyme was obtained from the sugar apple (Annona squamosa), immobilized in chitosan ionically crosslinked with oxalate.
View Article and Find Full Text PDFBiosensors based on hydrophobic ionic liquids (ILs) derived from the bis(trifluoromethylsulfonyl)imide [(CF(3)SO(2))(2)N(-) = Tf(2)N(-)] anion associated with three different imidazolium cations: 1-butyl-3-methylimidazolium (BMI x Tf(2)N), 1-decyl-3-methylimidazolium (DMI x Tf(2)N) and 1-tetradecyl-3-methylimidazolium (TDMI x Tf(2)N), along with laccase from Aspergillus oryzae, were constructed and optimized for determination of rutin. The laccase catalyzes the oxidation of rutin to the corresponding o-quinone, which is electrochemically reduced back to rutin. The best performance was obtained with 50:20:15:15% (w/w/w/w) as the graphite powder:laccase:Nujol:ILs composition in 0.
View Article and Find Full Text PDF