An antibacterial membrane based on Janus bacterial cellulose with nano-sized copper oxide through polydopamine conjugation for infectious wound healing.

Bacterial cellulose (BC) produced by Acetobacter xylinum has great advantages in wound dressing. However, the structural limitation under static culture, and lack of antibacterial properties restrict its application, especially for infectious wound healing. The present study reported an original wound dressing, which was composed of a Janus BC membrane with antibacterial nano-sized copper oxide (CuO) through polydopamine (PDA) conjugation to promote wound healing under infectious condition.

Functional engineering strategies of 3D printed implants for hard tissue replacement.

Three-dimensional printing technology with the rapid development of printing materials are widely recognized as a promising way to fabricate bioartificial bone tissues. In consideration of the disadvantages of bone substitutes, including poor mechanical properties, lack of vascularization and insufficient osteointegration, functional modification strategies can provide multiple functions and desired characteristics of printing materials, enhance their physicochemical and biological properties in bone tissue engineering. Thus, this review focuses on the advances of functional engineering strategies for 3D printed biomaterials in hard tissue replacement.

Analysis of Gyro Bias Depending on the Position of Inertial Measurement Unit in Rotational Inertial Navigation Systems.

In this paper, a calibration method for gyro bias that changes depending on the position of the IMU (inertial measurement unit) is proposed to improve the navigation performance of RLG-based RINS (ring-laser-gyro-based rotational inertial navigation system). RINS is a navigation device that compensates for the inertial sensor errors by utilizing the rotation of the IMU. In previous studies, the rotation scheme of the IMU is designed assuming that inertial sensor errors are not affected by position of the IMU.

Apatite nanosheets inhibit initial smooth muscle cell proliferation by damaging cell membrane.

Understanding how nanostructured coatings interact with cells is related to how they manipulate cell behaviors and is therefore critical for designing better biomaterials. The apatite nanosheets were deposited on metallic substrates via biomimetic precipitation. Cell viability of apatite nanosheets towards to smooth muscle cells (SMCs) were investigated, and the underlying mechanism was proposed.

Silk Fibroin/Collagen Blended Membrane Fabricated via a Green Papermaking Method for Potential Guided Bone Regeneration Application: and Evaluation.

Guided bone regeneration (GBR) technology is a commonly used surgical procedure for the repair of damaged periodontal tissues. Poor mechanical property and rapid degradation rate are the major reasons for GBR membrane failure in clinical applications. Herein, we applied a green papermaking method to fabricate silk fibroin (SF) membranes blended with collagen and tested their performance.

Method for Improved Performance of Fixed-Gain Self-Alignment in the Temperature Stabilizing State.

Self-alignment (or initial alignment) is the process by which the Inertial Navigation System (INS) is aligned using only measurements from the inertial sensors and the reference navigation information in the stationary state. The main purpose of self-alignment is to calculate the initial attitude of the INS. The accuracy of self-alignment is determined by the performance grade of the inertial sensors, for instance, the accuracy of the horizontal attitude by the horizontal accelerometer and the accuracy of the vertical attitude by the East-axis gyro.

Assessment of respiratory and systemic toxicity of Benzalkonium chloride following a 14-day inhalation study in rats.

Background: Although biocides at low concentrations have been used to control pests, they can be more harmful than industrial chemicals as humans are directly and frequently exposed to such biocides. Benzalkonium chloride (BAC or BKC) is a non-toxic substance used to control pests. Recently, BAC has been increasingly used as a component in humidifier disinfectants in Korea, raising a serious health concern.

Synergistic Effects on Incorporation of β-Tricalcium Phosphate and Graphene Oxide Nanoparticles to Silk Fibroin/Soy Protein Isolate Scaffolds for Bone Tissue Engineering.

In bone tissue engineering, an ideal scaffold is required to have favorable physical, chemical (or physicochemical), and biological (or biochemical) properties to promote osteogenesis. Although silk fibroin (SF) and/or soy protein isolate (SPI) scaffolds have been widely used as an alternative to autologous and heterologous bone grafts, the poor mechanical property and insufficient osteoinductive capability has become an obstacle for their in vivo applications. Herein, β-tricalcium phosphate (β-TCP) and graphene oxide (GO) nanoparticles are incorporated into SF/SPI scaffolds simultaneously or individually.

Electrical stimulation as a novel tool for regulating cell behavior in tissue engineering.

Recently, electrical stimulation as a physical stimulus draws lots of attention. It shows great potential in disease treatment, wound healing, and mechanism study because of significant experimental performance. Electrical stimulation can activate many intracellular signaling pathways, and influence intracellular microenvironment, as a result, affect cell migration, cell proliferation, and cell differentiation.

USF2 enhances the osteogenic differentiation of PDLCs by promoting ATF4 transcriptional activities.

Objective: Our study aimed to elucidate the regulatory molecules related to the osteogenic differentiation of periodontal ligament cells (PDLCs).

Background: Periodontal ligament cells are a favorable source for cell-based therapy in periodontal bone engineering and regeneration due to their potential multilineage differentiation ability. However, the molecular mechanism and signaling pathways related to the osteogenic differentiation of PDLCs are still unclear.

Development of novel oxygen carriers by coupling hemoglobin to functionalized multiwall carbon nanotubes.

Preparation of stable and effective artificial oxygen carriers (AOCs) is a promising strategy to temporarily replace transfused blood and solve tissue hypoxia. Developing hemoglobin (Hb) loaded particles is one of the main ways to prepare suitable AOCs. Particles with a hierarchical micro/nanostructure can be loaded with plenty of proteins and have attracted great attention.

Patterned iridium oxide film as neural electrode interface: Biocompatibility and improved neurite outgrowth with electrical stimulation.

Iridium (Ir) thin film was deposited on patterned titanium substrate by direct-current (DC) magnetron sputtering, and then activated in sulfuric acid (HSO) through repetitive potential sweeps to form iridium oxide (IrO) as neural electrode interface. The resultant IrO film showed a porous and open morphology with aligned microstructure, exhibited superior electrochemical performance and excellent stability. The IrO film supported neural stem cells (NSCs) attachment, proliferation and improved processes without causing toxicity.

Osteogenesis of 3D printed macro-pore size biphasic calcium phosphate scaffold in rabbit calvaria.

To investigate the osteogenesis of macro-pore sized bone scaffolds, biphasic calcium phosphate scaffolds with accurately controlled macro-pore size (0.8, 1.2, and 1.

Laminin functionalized biomimetic apatite to regulate the adhesion and proliferation behaviors of neural stem cells.

Background: Functionalizing biomaterial substrates with biological signals shows promise in regulating neural stem cell (NSC) behaviors through mimicking cellular microenvironment. However, diverse methods for immobilizing biological molecules yields promising results but with many problems. Biomimetic apatite is an excellent carrier due to its non-toxicity, good biocompatibility, biodegradability, and favorable affinity to plenty of molecules.

Biomimetic apatite formed on cobalt-chromium alloy: A polymer-free carrier for drug eluting stent.

In this study, sirolimus (SRL) was loaded within biomimetic apatite formed on cobalt-chromium (Co-Cr) alloy, which has been reported for the first time, to inhibit the in-stent restenosis. Two different groups of loading SRL within biomimetic apatite were prepared: Group A (mono-layer of apatite/SRL) and Group B (bi-layer of apatite/SRL). Group A and Group B showed the biphasic pattern of SRL release up to 40 and 90days, respectively.

Silk fibroin membrane used for guided bone tissue regeneration.

With the aim to develop a novel membrane with an appropriate mechanical property and degradation rate for guided bone tissue regeneration, lyophilized and densified silk fibroin membrane was fabricated and its mechanical behavior as well as biodegradation property were investigated. The osteoconductive potency of the silk fibroin membranes were evaluated in a defect rabbit calvarial model. Silk fibroin membrane showed the modulated biodegradable and mechanical properties via ethanol treatment with different concentration.

Sirolimus-loaded CaP coating on Co-Cr alloy for drug-eluting stent.

To achieve polymer-free and controllable drug-eluting system, there have been many efforts to modify the surface composition and topography of metal stent. Recently, calcium phosphate is commonly applied to metallic implants as a coating material for fast fixation and firm-implant bone attachment on the account of its demonstrated bioactive and osteoconductive properties. In the present study, the release of sirolimus could be controllable because of immobilization of sirolimus during the process of biomimetic CaP coating forming.

Poly(acrylic acid)-regulated Synthesis of Rod-Like Calcium Carbonate Nanoparticles for Inducing the Osteogenic Differentiation of MC3T3-E1 Cells.

Calcium carbonate, especially with nanostructure, has been considered as a good candidate material for bone regeneration due to its excellent biodegradability and osteoconductivity. In this study, rod-like calcium carbonate nanoparticles (Rod-CC NPs) with desired water dispersibility were achieved with the regulation of poly (acrylic acid). Characterization results revealed that the Rod-CC NPs had an average length of 240 nm, a width of 90 nm with an average aspect ratio of 2.

Research trends in biomimetic medical materials for tissue engineering: 3D bioprinting, surface modification, nano/micro-technology and clinical aspects in tissue engineering of cartilage and bone.

This review discusses about biomimetic medical materials for tissue engineering of bone and cartilage, after previous scientific commentary of the invitation-based, Korea-China joint symposium on biomimetic medical materials, which was held in Seoul, Korea, from October 22 to 26, 2015. The contents of this review were evolved from the presentations of that symposium. Four topics of biomimetic medical materials were discussed from different research groups here: 1) 3D bioprinting medical materials, 2) nano/micro-technology, 3) surface modification of biomaterials for their interactions with cells and 4) clinical aspects of biomaterials for cartilage focusing on cells, scaffolds and cytokines.

Hydrothermal fabrication of porous hollow hydroxyapatite microspheres for a drug delivery system.

Porous hollow hydroxyapatite microspheres (PHHMs) are the promising biomaterials, owing to their excellent biocompatibility, biodegradability and bioactivity. PHHMs have been used as drug controlled carriers due to their advantages such as large drug loading capacity, nanochannels for drug loading and release and high specific surface area. In this study, PHHMs were prepared successfully in Na2HPO4 solution by an anion-exchange process using vaterite CaCO3 through a hydrothermal method.

Modification of surface/neuron interfaces for neural cell-type specific responses: a review.

Surface/neuron interfaces have played an important role in neural repair including neural prostheses and tissue engineered scaffolds. This comprehensive literature review covers recent studies on the modification of surface/neuron interfaces. These interfaces are identified in cases both where the surfaces of substrates or scaffolds were in direct contact with cells and where the surfaces were modified to facilitate cell adhesion and controlling cell-type specific responses.

Immobilizing osteogenic growth peptide with and without fibronectin on a titanium surface: effects of loading methods on mesenchymal stem cell differentiation.

In this study, to improve the osseointegration of implants, osteogenic growth peptide (OGP) and fibronectin (FN) were loaded within mineral, which was formed on titanium, through adsorption and coprecipitation methods. The release profiles of OGP loaded by either adsorption or coprecipitation and the effects of the loading methods to immobilize OGP with and without FN on rat mesenchymal stem cell (rMSC) osteogenic differentiation were studied. The coprecipitation approach slightly reduced the initial burst release, while the adsorption approach provided a more sustained release.

Early bone healing onto implant surface treated by fibronectin/oxysterol for cell adhesion/osteogenic differentiation: in vivo experimental study in dogs.

Purpose: This study aimed to evaluate the effects of fibronectin and oxysterol immobilized on machined-surface dental implants for the enhancement of cell attachment and osteogenic differentiation, on peri-implant bone healing in the early healing phase using an experimental model in dogs.

Methods: Five types of dental implants were installed at a healed alveolar ridge in five dogs: a machined-surface implant (MI), apatite-coated MI (AMI), fibronectin-loaded AMI (FAMI), oxysterol-loaded AMI (OAMI), and sand-blasted, large-grit, acid-etched surface implant (SLAI). A randomly selected unilateral ridge was observed for 2 weeks, and the contralateral ridge for a 4-week period.

Advances in the surface modification techniques of bone-related implants for last 10 years.

At the time of implanting bone-related implants into human body, a variety of biological responses to the material surface occur with respect to surface chemistry and physical state. The commonly used biomaterials (e.g.