Development of Mesenchymal Stem Cell Encoded with Myogenic Gene for Treating Radiation-Induced Muscle Fibrosis.

Radiation therapy (RT) is a typical treatment for head and neck cancers. However, prolonged irradiation of the esophagus can cause esophageal fibrosis due to increased reactive oxygen species and proinflammatory cytokines. The objective of this study was to determine whether myogenic gene-transfected mesenchymal stem cells (MSCs) could ameliorate damage to esophageal muscles in a mouse model of radiation-induced esophageal fibrosis.

Incorporation of Cell-Adhesive Proteins in 3D-Printed Lipoic Acid-Maleic Acid-Poly(Propylene Glycol)-Based Tough Gel Ink for Cell-Supportive Microenvironment.

In extrusion-based 3D printing, the use of synthetic polymeric hydrogels can facilitate fabrication of cellularized and implanted scaffolds with sufficient mechanical properties to maintain the structural integrity and physical stress within the in vivo conditions. However, synthetic hydrogels face challenges due to their poor properties of cellular adhesion, bioactivity, and biofunctionality. New compositions of hydrogel inks have been designed to address this limitation.

Erectile Dysfunction Treatment Using Stem Cell Delivery Patch in a Cavernous Nerve Injury Rat Model.

Erectile dysfunction (ED) is a common and feared complication of radical prostatectomy (RP) for prostate cancer. Recently, tissue engineering for post-prostatectomy ED has been attempted in which controlled interactions between cells, growth factors, and the extracellular matrix (ECM) are important for the structural integrity if nerve regeneration. In this study, we evaluated the effects of a biomechanical ECM patch on the morphology and behavior of human bone marrow-derived mesenchymal stem cells (hBMSCs) in a bilateral cavernous nerve injury (BCNI) rat model.

Assessment of Esophageal Reconstruction via Bioreactor Cultivation of a Synthetic Scaffold in a Canine Model.

Objectives: Using tissue-engineered materials for esophageal reconstruction is a technically challenging task in animals that requires bioreactor training to enhance cellular reactivity. There have been many attempts at esophageal tissue engineering, but the success rate has been limited due to difficulty in initial epithelialization in the special environment of peristalsis. The purpose of this study was to evaluate the potential of an artificial esophagus that can enhance the regeneration of esophageal mucosa and muscle through the optimal combination of a double-layered polymeric scaffold and a custom-designed mesenchymal stem cell-based bioreactor system in a canine model.

Alternative non-oral nutrition in a rat model: a novel modified gastrostomy technique.

The gastrostomy technique is essential for esophageal reconstruction using a scaffold. To date, there are no established methods to supply nutrients through a gastrostomy tube in rats. The purpose of this study was to analyze the feasibility of a newly modified gastrostomy technique for non-oral nutrition in an adult rat model.

Three-Dimensional Printed Design of Antibiotic-Releasing Esophageal Patches for Antimicrobial Activity Prevention.

Pharyngoesophageal defects can cause exposure to various bacterial flora and severe inflammation. We fabricated a biodegradable polycaprolactone (PCL) patch composed of both thin film and three-dimensional (3D) printed lattice, and then investigated the efficacy of pharyngoesophageal reconstruction by using 3D printed antibiotic-releasing PCL patches that inhibited early inflammation by sustained tetracycline (TCN) release from both thin PCL films and printed rods implanted in esophageal partial defects. PCL was 3D printed in lattice form on a presolution casted PCL thin film at ∼100 μm resolution.

Regeneration of irradiation-damaged esophagus by local delivery of mesenchymal stem-cell spheroids encapsulated in a hyaluronic-acid-based hydrogel.

Radiation therapy (RT) is a typical treatment for head and neck cancers. Generally, prolonged irradiation of the esophagus causes esophageal fibrosis due to increased reactive oxygen species and proinflammatory cytokines. This study was designed to determine whether catechol-functionalized hyaluronic acid (HA-CA) hydrogel-encapsulated human mesenchymal stem-cell spheroids (MSC-SPs) could ameliorate damage to the esophagus in a mouse model of radiation-induced esophageal fibrosis.

Experimental investigation of esophageal reconstruction with electrospun polyurethane nanofiber and 3D printing polycaprolactone scaffolds using a rat model.

Background: We evaluated the outcome of esophageal reconstructions using tissue-engineered scaffolds.

Method: Partial esophageal defects were reconstructed with the following scaffolds; animals were grouped (n = 7 per group) as follows: (a) normal rats; (b) rats implanted with three-dimensional printing (3DP) polycaprolactone (PCL) scaffolds; (c) with human adipose-derived mesenchymal stem cell (ADSC)-seeded 3DP PCL scaffolds; (d) with polyurethane (PU)-nanofiber(Nf) scaffolds; and (e) with ADSC-seeded PU-Nf scaffolds.

Results: The esophageal defects were successfully repaired; however, muscle regeneration was greater in the 3DP PCL + ADSC groups than in the PU-Nf + ADSC groups (P < .

Self-crosslinking hyaluronic acid-carboxymethylcellulose hydrogel enhances multilayered 3D-printed construct shape integrity and mechanical stability for soft tissue engineering.

One of the primary challenges in extrusion-based 3D bioprinting is the ability to print self-supported multilayered constructs with biocompatible hydrogels. The bioinks should have sufficient post-printing mechanical stability for soft tissue and organ regeneration. Here, we report on the synthesis, characterization and 3D printability of hyaluronic acid (HA)-carboxymethylcellulose (CMC) hydrogels cross-linked through N-acyl-hydrazone bonding.

Transplantation of a 3D-printed tracheal graft combined with iPS cell-derived MSCs and chondrocytes.

For successful tracheal reconstruction, tissue-engineered artificial trachea should meet several requirements, such as biocompatible constructs comparable to natural trachea, coverage with ciliated respiratory mucosa, and adequate cartilage remodeling to support a cylindrical structure. Here, we designed an artificial trachea with mechanical properties similar to the native trachea that can enhance the regeneration of tracheal mucosa and cartilage through the optimal combination of a two-layered tubular scaffold and human induced pluripotent stem cell (iPSC)-derived cells. The framework of the artificial trachea was fabricated with electrospun polycaprolactone (PCL) nanofibers (inner) and 3D-printed PCL microfibers (outer).

Tissue-Engineered Graft for Circumferential Esophageal Reconstruction in Rats.

The use of biocompatible materials for circumferential esophageal reconstruction is a technically challenging task in rats and requires an optimal implant technique with nutritional support. Recently, there have been many attempts at esophageal tissue engineering, but the success rate has been limited due to difficulty in early epithelization in the special environment of peristalsis. Here, we developed an artificial esophagus that can improve the regeneration of the esophageal mucosa and muscle layers through a two-layered tubular scaffold, a mesenchymal stem cell-based bioreactor system, and a bypass feeding technique with modified gastrostomy.

Stretchable ECM Patch Enhances Stem Cell Delivery for Post-MI Cardiovascular Repair.

Current cell-based therapies administered after myocardial infarction (MI) show limited efficacy due to subpar cell retention in a dynamically beating heart. In particular, cardiac patches generally provide a cursory level of cell attachment due to the lack of an adequate microenvironment. From this perspective, decellularized cell-derived ECM (CDM) is attractive in its recapitulation of a natural biophysical environment for cells.

Mechanical stimuli enhance simultaneous differentiation into oesophageal cell lineages in a double-layered tubular scaffold.

The tissue-engineered oesophagus serves as an alternative and promising therapeutic approach for long-gap oesophageal replacement. This study proposes an advanced in vitro culture platform focused on construction of the oesophagus by combining an electrospun double-layered tubular scaffold, stem cells, biochemical reagents, and biomechanical factors. Human mesenchymal stem cells were seeded onto the inner and outer surfaces of the scaffold.

Stem Cells Seeded on Multilayered Scaffolds Implanted into an Injured Bladder Rat Model Improves Bladder Function.

Background: To investigate whether human adipose-derived stem cells (hADSCs) seeded on multilayered poly (l-lactide--ɛ-caprolactone) (PLCL) sheets improve bladder function in a rat model of detrusor smooth muscle-removed bladder.

Methods: Male rats were randomly divided into 4 groups: Normal, injury (detrusor smooth muscle-removed bladder), PLCL (detrusor smooth muscle-removed bladder implanted with PLCL sheets), and PLCL + ADSC (detrusor smooth muscle-removed bladder implanted with PLCL sheets seeded with hADSCs). Four weeks after the treatment, physiological, histological, immunohistochemical, and immunoblot analyses were performed.

Regeneration of Paralyzed Vocal Fold by the Injection of Plasmid DNA Complex-Loaded Hydrogel Bulking Agent.

Various growth factor delivery systems were used in the treatment of glottal insufficiency; however, relatively little attention has been paid to a gene delivery system for aspects of active vocal fold (VF) regeneration. Herein, we present a plasmid DNA (pDNA; bFGF gene encoding) complex-loaded alginate (ALG)/hyaluronic acid (HA) mixture hydrogel dispersed with polycaprolactone (PCL) microspheres that can enhance simultaneous regeneration of VF muscle and lamina propria, as well as have a bulking effect on atrophied VF. We have demonstrated long-term efficacy of bFGF synthesized from pDNA complex-transfected cells .

Injectable basic fibroblast growth factor-loaded alginate/hyaluronic acid hydrogel for rejuvenation of geriatric larynx.

Increase in the geriatric population has led to an increase in the number of elderly patients with laryngeal atrophy and dysfunction. Symptoms of voice change, dysphagia, and aspiration pneumonia negatively influence patient's health status, quality of life, and life span. Injection laryngoplasty used to treat laryngeal dysfunctions does not recover intrinsic functions of the larynx.

Tissue-Engineered Esophagus via Bioreactor Cultivation for Circumferential Esophageal Reconstruction.

The use of biomaterials for circumferential esophageal repair is technically challenging in a rat model, and an optimal scaffold implantation technique with nutritional support is essential. The purpose of this study was to investigate the effects of three-dimensional printed esophageal grafts and bioreactor cultivation on muscle regeneration and reepithelialization from circumferential esophageal defects in a rat model. Here, we designed an artificial esophagus that can enhance the regeneration of esophageal mucosa and muscle through the optimal combination of a two-layered tubular scaffold and mesenchymal stem cell-based bioreactor system.

Comparative studies on thin polycaprolactone-tricalcium phosphate composite scaffolds and its interaction with mesenchymal stem cells.

Background: Hybrid scaffolds combining biodegradable polymers and ceramic particles for control of cell adhesion and proliferation are interesting materials for tissue engineering applications. Combinations of biodegradable polymers and ceramics are to provide higher beneficial functionalities to tissue engineering scaffolds with addition of different cell specific bio-factors. Many such hybrid combinations have been reported by several researchers around the world by using various methods and solvents as well as bioactive matrix polymers to fabricate such biomaterials.

A terpolymeric hydrogel of hyaluronate-hydroxyethyl acrylate-gelatin methacryloyl with tunable properties as biomaterial.

Here, we report synthesis of a terpolymeric covalently crosslinked hydrogel of hyaluronate (HA) as biomaterial with elasticity, mechanical properties and cell interactions via conventional free radical polymerization technique. To provide elasticity and mechanical properties, 2-hydroxyethyl acrylate (HEA) was grafted in HA, while to tune cellular interactions, gelatin methacryloyl (GM) was used as crosslinker. The composition and probable structure of the terpolymer (HA-g-pHEA-x-GM) were analysed by FTIR, H HR-MAS-NMR, and TGA analyses.

Novel skin patch combining human fibroblast-derived matrix and ciprofloxacin for infected wound healing.

Skin injuries are frequently encountered in daily life, but deep wounds often poorly self-heal and do not recover completely. In this study, we propose a novel skin patch that combines antibiotic, cell-derived extracellular matrix (ECM) and biocompatible polyvinyl alcohol (PVA) hydrogel. Decellularized human lung fibroblast-derived matrix (hFDM) was prepared on tissue culture plate (TCP) and PVA solution was then poured onto it.

Combinational effects of mechanical forces and substrate surface characteristics on esophageal epithelial differentiation.

Even the efficacy of substrate and mechanical stimuli in addition to biochemical cues have been recognized in many studies of stem cell differentiation, few studies have been reported on the differentiation into esophageal epithelial cells. Therefore, the aim of this study was set to propose a method of differentiating stem cells into esophageal epithelial cells according to biochemical reagent concentration, substrate properties, and mechanical forces. After the concentration of all-trans retinoic acid was determined as 5 μM by a baseline experiment, the degree of differentiation was compared in three different kinds of substrates: cover glass, polyurethane (PU) membrane, and electrospun PU sheet (ePU).

Self-Healing and Adhesive Artificial Tissue Implant for Voice Recovery.

Loss of voice after vocal fold resection due to laryngeal cancer is a significant problem resulting in a low quality of life. Although there were many attempts to achieve a functional restoration of voice, challenges to regenerate vocal fold still remain due to its unique tissue mechanical characteristics such as pliability that produces phonation via vibration. In this study, we developed a mechanically compliant interpenetrating polymer network (IPN) hydrogel based on polyacrylamide (PAAM) and gelatin that matches physical and functional properties with native vocal fold tissue.

Approximating bone ECM: Crosslinking directs individual and coupled osteoblast/osteoclast behavior.

Osteoblast and osteoclast communication (i.e. osteocoupling) is an intricate process, in which the biophysical profile of bone ECM is an aggregate product of their activities.