Charge carrier dynamics in conducting polymer PEDOT using ab initio molecular dynamics simulations.

As conducting polymers become increasingly important in electronic devices, understanding their charge transport is essential for material and device development. Various semi-empirical approaches have been used to describe temporal charge carrier dynamics in these materials, but there have yet to be any theoretical approaches utilizing ab initio molecular dynamics. In this work, we develop a computational technique based on ab initio Car-Parrinello molecular dynamics to trace charge carrier temporal motion in archetypical conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT).

A computational study of cellulose regeneration: Coarse-grained molecular dynamics simulations.

Understanding the microscopic mechanisms of regeneration of cellulose is prerequisite for engineering and controlling its material properties. In this paper, we performed coarse-grained Martini 3 molecular dynamics simulations of cellulose regeneration at a scale comparable to the experiments. The X-ray diffraction (XRD) curves were monitored to follow the structural changes of regenerated cellulose and trace formation of cellulose sheets and crystallites.

A computational study of cellulose regeneration: All-atom molecular dynamics simulations.

Processing natural cellulose requires its dissolution and regeneration. It is known that the crystallinity of regenerated cellulose does not match that of native cellulose, and the physical and mechanical properties of regenerated cellulose can vary dependent on the technique applied. In this paper, we performed all-atom molecular dynamics simulations attempting to simulate the regeneration of order in cellulose.

Microscopic Insight into the Structure-Processing-Property Relationships of Core-Shell Structured Dialcohol Cellulose Nanoparticles.

In the quest to develop sustainable and environmentally friendly materials, cellulose is a promising alternative to synthetic polymers. However, native cellulose, in contrast to many synthetic polymers, cannot be melt-processed with traditional techniques because, upon heating, it degrades before it melts. One way to improve the thermoplasticity of cellulose, in the form of cellulose fibers, is through chemical modification, for example, to dialcohol cellulose fibers.

The structure of cellulose nanofibril networks at low concentrations and their stabilizing action on colloidal particles.

The structure and dynamics of networks formed by rod-shaped particles can be indirectly investigated by measuring the diffusion of spherical tracer particles. This method was used to characterize cellulose nanofibril (CNF) networks in both dispersed and arrested states, the results of which were compared with coarse-grained Brownian dynamics simulations. At a CNF concentration of 0.

Why does solvent treatment increase the conductivity of PEDOT : PSS? Insight from molecular dynamics simulations.

Poly(3,4-ethylenedioxythiophene) : polystyrene sulfonate (PEDOT : PSS) is one of the most important conducting polymers. In its pristine form its electrical conductivity is low, but it can be enhanced by several orders of magnitude by solvent treatment, dimethyl sulfoxide (DMSO). There are various (and often conflicting) explanations of this effect suggested in the experimental literature, but its theoretical understanding based on simulation and modelling accounting for the complex realistic morphology of PEDOT : PSS is missing.

Exploiting mixed conducting polymers in organic and bioelectronic devices.

Efficient transport of both ionic and electronic charges in conjugated polymers (CPs) has enabled a wide range of novel electrochemical devices spanning applications from energy storage to bioelectronic devices. In this Perspective, we provide an overview of the fundamental physical processes which underlie the operation of mixed conducting polymer (MCP) devices. While charge injection and transport have been studied extensively in both ionic and electronic conductors, translating these principles to mixed conducting systems proves challenging due to the complex relationships among the individual materials properties.

Ion Diffusion through Nanocellulose Membranes: Molecular Dynamics Study.

One of the most promising applications of nanocellulose is for membranes for energy storage devices including supercapacitors, batteries, and fuel cells. Several recent studies reported the fabrication of cellulose-based membranes where ionic conductivity was confined to channels. So far, theoretical understanding of the effect of the nanoconfinement and surface charged groups on the diffusion coefficient of ions in cellulose nanochannels is missing.

Faradaic Pixels for Precise Hydrogen Peroxide Delivery to Control M-Type Voltage-Gated Potassium Channels.

H O plays a significant role in a range of physiological processes where it performs vital tasks in redox signaling. The sensitivity of many biological pathways to H O opens up a unique direction in the development of bioelectronics devices to control levels of reactive-oxygen species (ROS). Here a microfabricated ROS modulation device that relies on controlled faradaic reactions is presented.

Tuning of the elastic modulus of a soft polythiophene through molecular doping.

Molecular doping of a polythiophene with oligoethylene glycol side chains is found to strongly modulate not only the electrical but also the mechanical properties of the polymer. An oxidation level of up to 18% results in an electrical conductivity of more than 52 S cm and at the same time significantly enhances the elastic modulus from 8 to more than 200 MPa and toughness from 0.5 to 5.

How Long are Polymer Chains in Poly(3,4-ethylenedioxythiophene):Tosylate Films? An Insight from Molecular Dynamics Simulations.

Poly(3,4-ethylenedioxythiophene) (PEDOT) is one of the most important conductive polymers utilized in a variety of applications in organic electronics and bioelectronics and energy storage. PEDOT chains are believed to be rather short, but detailed knowledge of their length is missing because of the challenges in its experimental determination due to insolubility of PEDOT films. Here, we report a molecular dynamics (MD) study of in situ oxidative chemical polymerization and simultaneous crystallization of molecularly doped PEDOT focusing on the determination of its chain lengths at different polymerization temperatures.

UV-to-IR Absorption of Molecularly p-Doped Polythiophenes with Alkyl and Oligoether Side Chains: Experiment and Interpretation Based on Density Functional Theory.

The UV-to-IR transitions in p-doped poly(3-hexylthiophene) (P3HT) with alkyl side chains and polar polythiophene with tetraethylene glycol side chains are studied experimentally by means of the absorption spectroscopy and computationally using density functional theory (DFT) and tight-binding DFT. The evolution of electronic structure is calculated as the doping level is varied, while the roles of dopant ions, chain twisting, and π-π stacking are also considered, each of these having the effect of broadening the absorption peaks while not significantly changing their positions. The calculated spectra are found to be in good agreement with experimental spectra obtained for the polymers doped with a molybdenum dithiolene complex.

Density Functional Theory Mechanistic Study on HO Production Using an Organic Semiconductor Epindolidione.

Organic semiconductors have recently emerged as promising catalytic materials for oxygen reduction to hydrogen peroxide, HO, a chemical of great importance in industry as well as biology. While examples of organic semiconductor-mediated photocatalytic and electrocatalytic processes for HO production become more numerous and improve in performance, fundamental understanding of the reaction mechanisms at play have been explored far less. The aim of the present work is to computationally test hypotheses of how selective oxygen reduction to HO generally occurs on carbonyl dyes and pigments.

PEDOT:PSS nano-particles in aqueous media: A comparative experimental and molecular dynamics study of particle size, morphology and z-potential.

Pedot: PSS is the most widely used conducting polymer in organic and printed electronics.

Pedot: PSS films have been extensively studied to understand the morphology, ionic and electronic conductivity of the polymer. However, the polymer dispersion, which is used to cast or spin coat the films, is not well characterized and not well understood theoretically.

Side Chain Redistribution as a Strategy to Boost Organic Electrochemical Transistor Performance and Stability.

A series of glycolated polythiophenes for use in organic electrochemical transistors (OECTs) is designed and synthesized, differing in the distribution of their ethylene glycol chains that are tethered to the conjugated backbone. While side chain redistribution does not have a significant impact on the optoelectronic properties of the polymers, this molecular engineering strategy strongly impacts the water uptake achieved in the polymers. By careful optimization of the water uptake in the polymer films, OECTs with unprecedented steady-state performances in terms of [μC ] and current retentions up to 98% over 700 electrochemical switching cycles are developed.

Theoretical Rationalization of Self-Assembly of Cellulose Nanocrystals: Effect of Surface Modifications and Counterions.

The hierarchical self-assembly of cellulose nanocrystals (CNCs) is an important phenomenon occurring naturally in plant cell walls. Utilization of this assembly for advanced applications requires a fundamental theoretical understanding of interactions between the CNCs, which is still incomplete. Hence, in this work, we used molecular dynamics simulations to study the effect of surface modification on the interactions between the CNCs and the resulting bundling process.

New Patchy Particle Model with Anisotropic Patches for Molecular Dynamics Simulations: Application to a Coarse-Grained Model of Cellulose Nanocrystal.

Self-assembly is ubiquitous in nature and underlies the formation of many complex systems from the molecular to the macroscopic scale. Kern-Frenkel-like patchy particles are powerful models to investigate this phenomenon by computational methods such as Monte Carlo or molecular dynamics simulations. However, in these models the interactions are mediated by circular patches at the particle surface, which can be hardly mapped to realistic systems, containing for instance faceted particles with rectangular surfaces.

Reversible Electronic Solid-Gel Switching of a Conjugated Polymer.

Conjugated polymers exhibit electrically driven volume changes when included in electrochemical devices via the exchange of ions and solvent. So far, this volumetric change is limited to 40% and 100% for reversible and irreversible systems, respectively, thus restricting potential applications of this technology. A conjugated polymer that reversibly expands by about 300% upon addressing, relative to its previous contracted state, while the first irreversible actuation can achieve values ranging from 1000-10 000%, depending on the voltage applied is reported.

Structural Control of Charge Storage Capacity to Achieve 100% Doping in Vapor Phase-Polymerized PEDOT/Tosylate.

Vapor phase polymerization (VPP) is used to fabricate a series of tosylate-doped poly(3,4-ethylenedioxythiophene) (PEDOT) electrodes on carbon paper. The series of VPP PEDOT/tosylate coatings has varying levels of crystallinity and electrical conductivity because of the use (or not) of nonionic triblock copolymers in the oxidant solution during synthesis. As a result, the impact of the structure on charge storage capacity is investigated using tetra--butylammonium hexafluorophosphate (0.

The intrinsic volumetric capacitance of conducting polymers: pseudo-capacitors or double-layer supercapacitors?

The capacitance of conducting polymers represents one of the most important material parameters that in many cases determines the device and material performances. Despite a vast number of experimental studies, the theoretical understanding of the origin of the capacitance in conducting polymers remains unsatisfactory and appears even controversial. Here, we present a theoretical method, based on first principle capacitance calculations using density functional theory (DFT), and apply it to calculate the volumetric capacitance of two archetypical conducting polymers: poly(3,4-ethylene dioxythiophene) (PEDOT) and polypyrrole (PPy).

Why Is Pristine PEDOT Oxidized to 33%? A Density Functional Theory Study of Oxidative Polymerization Mechanism.

Currently, a theoretical understanding of thermodynamics and kinetics of the oxidative polymerization of poly(3,4-ethylenedioxythiophene) (best known as PEDOT) is missing. In the present study, step-by-step density functional theory calculations of the radical polymerization of PEDOT with tosylate counterions (PEDOT:TOS) using Fe(TOS) as oxidant and dopant are performed. We calculate the Gibbs free energy for the conventional mechanism that consists of the polymerization of neutral PEDOT oligomers first, followed by their oxidation (doping).

Computational microscopy study of the granular structure and pH dependence of PEDOT:PSS.

Computational microscopy based on Martini coarse grained molecular dynamics (MD) simulations of a doped conducting polymer poly(3,4-ethylenedioxythiophene)polystyrene sulfonate (best known as PEDOT:PSS) was performed focussing on the formation of the granular structure and PEDOT crystallites, and the effect of pH on the material morphology. The PEDOT:PSS morphology is shown to be sensitive to the initial distribution of PEDOT and PSS in the solution, and the results of the modelling suggest that the experimentally observed granular structure of PEDOT:PSS can be only obtained if the PEDOT/PSS solution is in the dispersive state in the initial crystallization stages. Variation of the pH is demonstrated to strongly affect the morphology of PEDOT:PSS films, altering their structure between granular-type and homogeneous.

Ion Electron-Coupled Functionality in Materials and Devices Based on Conjugated Polymers.

The coupling between charge accumulation in a conjugated polymer and the ionic charge compensation, provided from an electrolyte, defines the mode of operation in a vast array of different organic electrochemical devices. The most explored mixed organic ion-electron conductor, serving as the active electrode in these devices, is poly(3,4-ethyelenedioxythiophene) doped with polystyrelensulfonate (PEDOT:PSS). In this progress report, scientists of the Laboratory of Organic Electronics at Linköping University review some of the achievements derived over the last two decades in the field of organic electrochemical devices, in particular including PEDOT:PSS as the active material.

Substrate-Dependent Morphology and Its Effect on Electrical Mobility of Doped Poly(3,4-ethylenedioxythiophene) (PEDOT) Thin Films.

Deposition dynamics, crystallization, molecular packing, and electronic mobility of poly(3,4-ethylenedioxythiophene) (PEDOT) thin films are affected by the nature of the substrate. Computational microscopy has been carried out to reveal the morphology-substrate dependence for PEDOT thin films doped with molecular tosylate deposited on different substrates including graphite, SiN, silicon, and amorphous SiO. It is shown that the substrate is instrumental in formation of the lamellar structure.