Novel Insights into Enhanced Stability of Li-Rich Layered and High-Voltage Olivine Phosphate Cathodes for Advanced Batteries through Surface Modification and Electron Structure Design.

The design of cathode/electrolyte interfaces in high-energy density Li-ion batteries is critical to protect the surface against undesirable oxygen release from the cathodes when batteries are charged to high voltage. However, the involvement of the engineered interface in the cationic and anionic redox reactions associated with (de-)lithiation is often ignored, mostly due to the difficulty to separate these processes from chemical/catalytic reactions at the cathode/electrolyte interface. Here, a new electron energy band diagrams concept is developed that includes the examination of the electrochemical- and ionization- potentials evolution upon batteries cycling.

Atomic-Scale View at the Segregation of Alkali Metals toward the KTaO(001) Perovskite Surface.

Perovskites exhibit outstanding performance in applications such as photocatalysis, electrochemistry, or photovoltaics, yet their practical use is hindered by the instability of these materials under operating conditions, specifically caused by the segregation of alkali cations toward the surface. The problem arises from the bulk strain related to different cation sizes, as well as the inherent electrostatic instability of perovskite surfaces. Here, we focus on atomistic details of the surface-driven process of interlayer switching of alkali atoms at the inorganic perovskite surface.

Mobility Gaps of Hydrogenated Amorphous Silicon Related to Hydrogen Concentration and Its Influence on Electrical Performance.

This paper presents a comprehensive study of hydrogenated amorphous silicon (a-Si)-based detectors, utilizing electrical characterization, Raman spectroscopy, photoemission, and inverse photoemission techniques. The unique properties of a-Si have sparked interest in its application for radiation detection in both physics and medicine. Although amorphous silicon (a-Si) is inherently a highly defective material, hydrogenation significantly reduces defect density, enabling its use in radiation detector devices.

High Spatial Resolution Detector System Based on Reconfigurable Dual-FPGA Approach for Coincidence Measurements.

Time-resolved spectroscopic and electron-ion coincidence techniques are essential to study dynamic processes in materials or chemical compounds. For this type of analysis, it is necessary to have detectors capable of providing, in addition to image-related information, the time of arrival for each individual detected particle ("x, y, time"). The electronics capable of handling such sensors must meet requirements achievable only with time-to-digital converters (TDC) with a resolution on the order of tens of picoseconds and the use of a field-programmable gate array (FPGA) to manage data acquisition and transmission.

Light-Induced Increase of the Local Molecular Coverage on a Surface.

Light is a versatile tool to remotely activate molecules adsorbed on a surface, for example, to trigger their polymerization. Here, we explore the spatial distribution of light-induced chemical reactions on a Au(111) surface. Specifically, the covalent on-surface polymerization of an anthracene derivative in the submonolayer coverage range is studied.

Physical Delithiation of Epitaxial LiCoO Battery Cathodes as a Platform for Surface Electronic Structure Investigation.

We report a novel delithiation process for epitaxial thin films of LiCoO(001) cathodes using only physical methods, based on ion sputtering and annealing cycles. Preferential Li sputtering followed by annealing produces a surface layer with a Li molar fraction in the range 0.5 < < 1, characterized by good crystalline quality.

High-Resolution Photoemission Study of Neutron-Induced Defects in Amorphous Hydrogenated Silicon Devices.

In this paper, by means of high-resolution photoemission, soft X-ray absorption and atomic force microscopy, we investigate, for the first time, the mechanisms of damaging, induced by neutron source, and recovering (after annealing) of p-i-n detector devices based on hydrogenated amorphous silicon (a-Si:H). This investigation will be performed by mean of high-resolution photoemission, soft X-Ray absorption and atomic force microscopy. Due to dangling bonds, the amorphous silicon is a highly defective material.

Correction: Tuning the charge carrier mobility in few-layer PtSe films by Se : Pt ratio.

[This corrects the article DOI: 10.1039/D1RA04507E.].

Tuning the charge carrier mobility in few-layer PtSe films by Se : Pt ratio.

Recently, few-layer PtSe films have attracted significant attention due to their properties and promising applications in high-speed electronics, spintronics and optoelectronics. Until now, the transport properties of this material have not reached the theoretically predicted values, especially with regard to carrier mobility. In addition, it is not yet known which growth parameters (if any) can experimentally affect the carrier mobility value.

Energy Level Alignment at the Cobalt Phosphate/Electrolyte Interface: Intrinsic Stability vs Interfacial Chemical Reactions in 5 V Lithium Ion Batteries.

The intrinsic stability of the 5 V LiCoPO-LiCoPO thin-film (carbon-free) cathode material coated with MoO thin layer is studied using a comprehensive synchrotron electron spectroscopy in situ approach combined with first-principle calculations. The atomic-molecular level study demonstrates fully reversible electronic properties of the cathode after the first electrochemical cycle. The polyanionic oxide is not involved in chemical reactions with the fluoroethylene-containing liquid electrolyte even when charged to 5.

Surface band bending and carrier dynamics in colloidal quantum dot solids.

Band bending in colloidal quantum dot (CQD) solids has become important in driving charge carriers through devices. This is typically a result of band alignments at junctions in the device. Whether band bending is intrinsic to CQD solids, is band bending present at the surface-vacuum interface, has previously been unanswered.

Atomically-Precise Texturing of Hexagonal Boron Nitride Nanostripes.

Monolayer hexagonal boron nitride (hBN) is attracting considerable attention because of its potential applications in areas such as nano- and opto-electronics, quantum optics and nanomagnetism. However, the implementation of such functional hBN demands precise lateral nanostructuration and integration with other two-dimensional materials, and hence, novel routes of synthesis beyond exfoliation. Here, a disruptive approach is demonstrated, namely, imprinting the lateral pattern of an atomically stepped one-dimensional template into a hBN monolayer.

Turning Low-Nanoscale Intrinsic Silicon Highly Electron-Conductive by SiO Coating.

Impurity doping in silicon (Si) ultra-large-scale integration is one of the key challenges which prevent further device miniaturization. Using ultraviolet photoelectron spectroscopy and X-ray absorption spectroscopy in the total fluorescence yield mode, we show that the lowest unoccupied and highest occupied electronic states of ≤3 nm thick SiO-coated Si nanowells shift by up to 0.2 eV below the conduction band and ca.

Morphological characterization and electronic properties of pristine and oxygen-exposed graphene nanoribbons on Ag(110).

Graphene nanoribbons (GNRs) are at the frontier of research on graphene materials since the 1D quantum confinement of electrons allows for the opening of an energy gap. GNRs of uniform and well-defined size and shape can be grown using the bottom-up approach, i.e.

Electronic Structures of the Vanadium-Intercalated and Substitutionally Doped Transition-Metal Dichalcogenides TiVSe.

The electronic structures of V-intercalated TiSe and substitutionally doped dichalcogenides TiVSe have been studied using soft X-ray photoelectron, resonant photoelectron, and absorption spectroscopies. In the case of the substitution of Ti by V, the formation of coherently oriented structural fragments VSe and TiSe is observed and a small charge transfer between these fragments is found. Intercalation of the V atoms into TiSe leads to charge transfer from the V atoms to the Ti atoms with the formation of covalent complexes Ti-Se-V-Se-Ti.

Gallium- and Iron-Pyoverdine Coordination Compounds Investigated by X-ray Photoelectron Spectroscopy and X-ray Absorption Spectroscopy.

Iron is an essential nutrient for nearly all forms of life, although scarcely available due to its poor solubility in nature and complex formation in higher eukaryotes. Microorganisms have evolved a vast array of strategies to acquire iron, the most common being the production of high-affinity iron chelators, termed siderophores. The opportunistic bacterial pathogen Pseudomonas aeruginosa synthesizes and secretes two siderophores, pyoverdine (PVD) and pyochelin (PCH), characterized by very different structural and functional properties.

Synthesis of corrugated C-based nanostructures by Br-corannulene oligomerization.

The structure and electronic properties of carbon-based nanostructures obtained by metal surface assisted synthesis is highly dependent on the nature of the precursor molecule. Here, we report on a combined scanning tunneling microscopy, soft X-ray spectroscopy and density functional theory investigation on the surface assisted polymerization of Br-corannulene at Ag(110) and on the possibility of building a mesh of π-conjugated polymers starting from buckyball shaped molecules. Indeed, the corannulene units form one-molecule-wide ribbons in which the natural concavity of the precursor molecule is maintained.

Plasmonic Sensor Based on Interaction between Silver Nanoparticles and Ni or Co in Water.

Silver nanoparticles capped with 3-mercapto-1propanesulfonic acid sodium salt (AgNPs-3MPS), able to interact with Ni or Co, have been prepared to detect these heavy metal ions in water. This system works as an optical sensor and it is based on the change of the intensity and shape of optical absorption peak due to the surface plasmon resonance (SPR) when the AgNPs-3MPS are in presence of metals ions in a water solution. We obtain a specific sensitivity to Ni and Co up to 500 ppb (part per billion).

Influence of Multistep Surface Passivation on the Performance of PbS Colloidal Quantum Dot Solar Cells.

The performance of devices containing colloidal quantum dot (CQD) films is strongly dependent on the surface chemistry of the CQDs they contain. Multistep surface treatments, which combine two or more strategies, are important for creating films with high carrier mobility that are well passivated against trap states and oxidation. Here, we examine the effect of a number of these surface treatments on PbS CQD films, including cation exchange to form PbS/CdS core/shell CQDs, and solid-state ligand-exchange treatments with Cl, Br, I, and 1,2-ethanedithiol (EDT) ligands.

Guest-Host Chemical Bonding and Possibility of Ordering of Intercalated Metals in Transition-Metal Dichalcogenides.

The comparison of the specifics of the guest-host chemical bonding in the materials with (Fe TiSe) and without (Fe TiTe) ordering of the iron atoms was performed. For this purpose the electronic structure of the materials were studied using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, resonant X-ray photoelectron spectroscopy, and theoretical calculations (total density of states, partial density of states, and multiplet calculations). For the iron-intercalated TiTe compound iron-chalcogen bonds are formed, whereas the formation of iron-iron bonds is most typical for the iron-intercalated TiSe compound.