Fast near-IR (NIR) emitters are highly valuable in telecommunications and biological imaging. The most established NIR emitters are epitaxially grown InGaAs quantum dots (QDs), but epitaxial growth has several disadvantages. Colloidal synthesis is a viable alternative that produces a few NIR-emitting materials, but they suffer from long photoluminescence (PL) times.
View Article and Find Full Text PDFThe current need to accelerate the adoption of photovoltaic (PV) systems has increased the need to explore new nanomaterials that can harvest and convert solar energy into electricity. Transition metal dichalcogenides (TMDCs) are good candidates because of their tunable physical and chemical properties. CuCrS has shown good electrical and thermoelectrical properties; however, its optical and photoconductivity properties remain unexplored.
View Article and Find Full Text PDFColloidal quantum dots (QDs) are attractive materials for the realization of solution-processable laser diodes. Primary challenges towards this objective are fast optical-gain relaxation due to nonradiative Auger recombination and poor stability of colloidal QD solids under high current densities required to obtain optical gain. Here we resolve these challenges and achieve broad-band optical gain spanning the band-edge (1S) and the higher-energy (1P) transitions.
View Article and Find Full Text PDFColloidal CdSe quantum dots (QDs) designed with a high degree of asymmetric internal strain have recently been shown to host a number of desirable optical properties including subthermal room-temperature line widths, suppressed spectral diffusion, and high photoluminescence (PL) quantum yields. It remains an open question, however, whether they are well-suited for applications requiring emission of identical single photons. Here we measure the low-temperature PL dynamics and the polarization-resolved fluorescence line narrowing spectra from ensembles of these strained QDs.
View Article and Find Full Text PDFColloidal semiconductor quantum dots (QDs) are attractive materials for realizing highly flexible, solution-processable optical gain media, but they are difficult to use in lasing because of complications associated with extremely short optical-gain lifetimes limited by nonradiative Auger recombination. By combining compositional grading of the QD's interior for hindering Auger decay with postsynthetic charging for suppressing parasitic ground-state absorption, we can reduce the lasing threshold to values below the single-exciton-per-dot limit. As a favorable departure from traditional multi-exciton-based lasing schemes, our approach should facilitate the development of solution-processable lasing devices and thereby help to extend the reach of lasing technologies into areas not accessible with traditional, epitaxially grown semiconductor materials.
View Article and Find Full Text PDFIn contrast to molecular systems, which are defined with atomic precision, nanomaterials generally show some heterogeneity in size, shape, and composition. The sample inhomogeneity translates into a distribution of energy levels, band gaps, work functions, and other characteristics, which detrimentally affect practically every property of functional nanomaterials. We discuss a novel synthetic strategy, colloidal atomic layer deposition (c-ALD) with stationary reactant phases, which largely circumvents the limitations of traditional colloidal syntheses of nano-heterostructures with atomic precision.
View Article and Find Full Text PDFSemiconductor quantum rings are topological structures that support fascinating phenomena such as the Aharonov-Bohm effect and persistent current, which are of high relevance in the research of quantum information devices. The annular shape of quantum rings distinguishes them from other low-dimensional materials, and enables topologically induced properties such as geometry-dependent spin manipulation and emission. While optical transition dipole moments (TDMs) in zero to two-dimensional optical emitters have been well investigated, those in quantum rings remain obscure despite their utmost relevance to the quantum photonic applications of quantum rings.
View Article and Find Full Text PDFMany important light-matter coupling and energy-transfer processes depend critically on the dimensionality and orientation of optical transition dipoles in emitters. We investigate individual quasi-two-dimensional nanoplatelets (NPLs) using higher-order laser scanning microscopy and find that absorption dipoles in NPLs are isotropic in three dimensions at the excitation wavelength. Correlated polarization studies of the NPLs reveal that their emission polarization is strongly dependent on the aspect ratio of the lateral dimensions.
View Article and Find Full Text PDFElevated temperature optoelectronic performance of semiconductor nanomaterials remains an important issue for applications. Here we examine 2D CdSe nanoplatelets (NPs) and CdS/CdSe/CdS shell/core/shell sandwich NPs at temperatures ranging from 300 to 700 K using static and transient spectroscopies as well as in situ transmission electron microscopy. NPs exhibit reversible changes in PL intensity, spectral position, and emission line width with temperature elevation up to ∼500 K, losing a factor of ∼8 to 10 in PL intensity at 400 K relative to ambient.
View Article and Find Full Text PDFNonradiative Auger recombination limits the efficiency with which colloidal semiconductor nanocrystals can emit light when they are subjected to strong excitation, with important implications for the application of the nanocrystals in light-emitting diodes and lasers. This has motivated attempts to engineer the structure of the nanocrystals to minimize Auger rates. Here, we study Auger recombination rates in CdSe/CdS core/shell nanoplatelets, or colloidal quantum wells.
View Article and Find Full Text PDFQuasi-two-dimensional nanoplatelets (NPLs) possess fundamentally different excitonic properties from zero-dimensional quantum dots. We study lateral size-dependent photon emission statistics and carrier dynamics of individual NPLs using second-order photon correlation (g(τ)) spectroscopy and photoluminescence (PL) intensity-dependent lifetime analysis. Room-temperature radiative lifetimes of NPLs can be derived from maximum PL intensity periods in PL time traces.
View Article and Find Full Text PDFPhotolithography is an important manufacturing process that relies on using photoresists, typically polymer formulations, that change solubility when illuminated with ultraviolet light. Here, we introduce a general chemical approach for photoresist-free, direct optical lithography of functional inorganic nanomaterials. The patterned materials can be metals, semiconductors, oxides, magnetic, or rare earth compositions.
View Article and Find Full Text PDFColloidal semiconductor nanocrystals have emerged as promising active materials for solution-processable optoelectronic and light-emitting devices. In particular, the development of nanocrystal lasers is currently experiencing rapid progress. However, these lasers require large pump powers, and realizing an efficient low-power nanocrystal laser has remained a difficult challenge.
View Article and Find Full Text PDFWe report measurements of electron transfer rates for four isoenergetic donor-acceptor pairs comprising a molecular electron acceptor, methylviologen (MV), and morphology-controlled colloidal semiconductor nanoparticles of CdSe. The four nanoparticles include a spherical quantum dot (QD) and three differing lateral areas of 4-monolayer-thick nanoplatelets (NPLs), each with a 2.42 eV energy gap.
View Article and Find Full Text PDFSemiconductor quantum rings are of great fundamental interest because their non-trivial topology creates novel physical properties. At the same time, toroidal topology is difficult to achieve for colloidal nanocrystals and epitaxially grown semiconductor nanostructures. In this work, we introduce the synthesis of luminescent colloidal CdSe nanorings and nanostructures with double and triple toroidal topology.
View Article and Find Full Text PDFSemiconductor nanorods can emit linear-polarized light at efficiencies over 80%. Polarization of light in these systems, confirmed through single-rod spectroscopy, can be explained on the basis of the anisotropy of the transition dipole moment and dielectric confinement effects. Here we report emission polarization in macroscopic semiconductor-polymer composite films containing CdSe/CdS nanorods and colloidal CdSe nanoplatelets.
View Article and Find Full Text PDFThere have been multiple demonstrations of amplified spontaneous emission (ASE) and lasing using colloidal semiconductor nanocrystals. However, it has been proven difficult to achieve low thresholds suitable for practical use of nanocrystals as gain media. Low-threshold blue ASE and lasing from nanocrystals is an even more challenging task.
View Article and Find Full Text PDFUsing time-resolved photoluminescence spectroscopy, we show that two-exciton Auger recombination dominates carrier recombination and cooling dynamics in CdSe nanoplatelets, or colloidal quantum wells. The electron-hole recombination rate depends only on the number of electron-hole pairs present in each nanoplatelet, and is consistent with a two-exciton recombination process over a wide range of exciton densities. The carrier relaxation rate within the conduction and valence bands also depends only on the number of electron-hole pairs present, apart from an initial rapid decay, and is consistent with the cooling rate being limited by reheating due to Auger recombination processes.
View Article and Find Full Text PDFFluorescence resonance energy transfer (FRET) enables photosynthetic light harvesting, wavelength downconversion in light-emitting diodes (LEDs), and optical biosensing schemes. The rate and efficiency of this donor to acceptor transfer of excitation between chromophores dictates the utility of FRET and can unlock new device operation motifs including quantum-funnel solar cells, non-contact chromophore pumping from a proximal LED, and markedly reduced gain thresholds. However, the fastest reported FRET time constants involving spherical quantum dots (0.
View Article and Find Full Text PDFJ Am Chem Soc
August 2014
Colloidal nanomaterials represent an important branch of modern chemistry. However, we have very little understanding of molecular processes that occur at the nanocrystal (NC) surface during synthesis and post-synthetic modifications. Here we show that potentiometry can be used to study the surface of colloidal NCs under realistic reaction conditions.
View Article and Find Full Text PDFThe use of colloidal semiconductor nanocrystals for optical amplification and lasing has been limited by the need for high input power densities. Here we show that colloidal nanoplatelets produce amplified spontaneous emission with thresholds as low as 6 μJ/cm(2) and gain as high as 600 cm(-1), both a significant improvement over colloidal nanocrystals; in addition, gain saturation occurs at pump fluences 2 orders of magnitude higher than the threshold. We attribute this exceptional performance to large optical cross-sections, slow Auger recombination rates, and narrow ensemble emission line widths.
View Article and Find Full Text PDF