A concept of "materials" diffraction and imaging beamline for SKIF: Siberian circular photon source.

Over the next decade, the extremely brilliant fourth generation synchrotron radiation sources are set to become a key driving force in materials characterization and technology development. In this study, we present a conceptual design of a versatile "Materia" diffraction and imaging beamline for a low-emittance synchrotron radiation facility. The beamline was optimized for operation with three main principal delivery regimes: parallel collimated beam ∼1 mm beam size, micro-focus regime with ∼10 μm beam spot size on the sample, and nano-focus regime with <100 nm focus.

Single-orientation colloidal crystals from capillary-action-induced shear.

We study the crystallization of colloidal dispersions under capillary-action-induced shear as the dispersion is drawn into flat walled capillaries. Using confocal microscopy and small angle x-ray scattering, we find that the shear near the capillary walls influences the crystallization to result in large random hexagonal close-packed (RHCP) crystals with long-range orientational order over tens of thousands of colloidal particles. We investigate the crystallization mechanism and find partial crystallization under shear, initiating with hexagonal planes at the capillary walls, where shear is highest, followed by epitaxial crystal growth from these hexagonal layers after the shear is stopped.

Grain Structure Engineering of NiTi Shape Memory Alloys by Intensive Plastic Deformation.

To explore an effective route of customizing the superelasticity (SE) of NiTi shape memory alloys via modifying the grain structure, binary NiTi (wt) alloys were fabricated in as-cast, hot swaged, and hot-rolled conditions, presenting contrasting grain sizes and grain boundary types. synchrotron X-ray Laue microdiffraction and synchrotron X-ray powder diffraction techniques were employed to unravel the underlying grain structure mechanisms that cause the diversity of SE performance among the three materials. The evolution of lattice rotation, strain field, and phase transformation has been revealed at the micro- and mesoscale, and the effect of grain structure on SE performance has been quantified.

Synchrotron X-ray Scattering Analysis of Nylon-12 Crystallisation Variation Depending on 3D Printing Conditions.

Nylon-12 is an important structural polymer in wide use in the form of fibres and bulk structures. Fused filament fabrication (FFF) is an extrusion-based additive manufacturing (AM) method for rapid prototyping and final product manufacturing of thermoplastic polymer objects. The resultant microstructure of FFF-produced samples is strongly affected by the cooling rates and thermal gradients experienced across the part.

Investigations into the interface failure of yttria partially stabilised zirconia - porcelain dental prostheses through microscale residual stress and phase quantification.

Objectives: Yttria Partially Stabilised Zirconia (YPSZ) is a high strength ceramic which has become widely used in porcelain veneered dental copings due to its exceptional toughness. Within these components the residual stress and crystallographic phase of YPSZ close to the interface are highly influential in the primary failure mode; near interface porcelain chipping. In order to improve present understanding of this behaviour, characterisation of these parameters is needed at an improved spatial resolution.

Spatially resolved mapping of phase transitions in liquid-crystalline materials by X-ray birefringence imaging.

The X-ray Birefringence Imaging (XBI) technique, first reported in 2014, is a sensitive method for spatially resolved mapping of the local orientational properties of anisotropic materials. We report the first application of the XBI technique to characterize molecular orientational ordering in a liquid crystalline material, demonstrating significant potential for exploiting XBI measurements to advance structural understanding of liquid crystal phases.

A water-cooled monochromator for the B16 Test beamline at the Diamond Light Source: capabilities and performance characterization.

Systematic studies of the performance of a water-cooled X-ray monochromator, designed and built for the B16 Test beamline at the Diamond Light Source, UK, are presented. A technical description of the monochromator is given and the results of commissioning measurements are discussed. Overall, the monochromator satisfies the original specifications well and meets all the major requirements of the versatile beamline.

Pulse picker for synchrotron radiation driven by a surface acoustic wave: erratum.

An erratum is presented to correct the typographical errors concerning the composition of the multilayer used in the experiment in Opt. Lett. 42, 1915.

Observation of dose-rate dependence in a Fricke dosimeter irradiated at low dose rates with monoenergetic X-rays.

Absolute measurements of the radiolytic yield of Fe3+ in a ferrous sulphate dosimeter formulation (6 mM Fe2+), with a 20 keV x-ray monoenergetic beam, are reported. Dose-rate suppression of the radiolytic yield was observed at dose rates lower than and different in nature to those previously reported with x-rays. We present evidence that this effect is most likely to be due to recombination of free radicals radiolytically produced from water.

Pulse picker for synchrotron radiation driven by a surface acoustic wave.

A functional test for a pulse picker for synchrotron radiation was performed at Diamond Light Source. The purpose of a pulse picker is to select which pulse from the synchrotron hybrid-mode bunch pattern reaches the experiment. In the present work, the Bragg reflection on a Si/BC multilayer was modified using surface acoustic wave (SAW) trains.

Multiple-length-scale deformation analysis in a thermoplastic polyurethane.

Thermoplastic polyurethane elastomers enjoy an exceptionally wide range of applications due to their remarkable versatility. These block co-polymers are used here as an example of a structurally inhomogeneous composite containing nano-scale gradients, whose internal strain differs depending on the length scale of consideration. Here we present a combined experimental and modelling approach to the hierarchical characterization of block co-polymer deformation.

Structure-delivery relationships of lysine-based gemini surfactants and their lipoplexes.

The synthesis and properties of gemini surfactants of the type (R(1)(CO)-Lys(H)-NH)2(CH2)n are reported. For a spacer length of n = 6, the hydrophobic acyl tail was varied in length (R(1) = C8, C10, C12, C14, C16, and C18) and, for R(1) = C18, the degree of unsaturation. For R(1)(CO) = oleoyl (C18:1 Z) the spacer length (n = 2-8) and the stereochemistry of the lysine building block were varied; a 'half-gemini' derivative with a single oleoyl tail and head group was also prepared.

X-ray birefringence imaging.

The polarizing optical microscope has been used since the 19th century to study the structural anisotropy of materials, based on the phenomenon of optical birefringence. In contrast, the phenomenon of x-ray birefringence has been demonstrated only recently and has been shown to be a sensitive probe of the orientational properties of individual molecules and/or bonds in anisotropic solids. Here, we report a technique-x-ray birefringence imaging (XBI)-that enables spatially resolved mapping of x-ray birefringence of materials, representing the x-ray analog of the polarizing optical microscope.

Hierarchical modelling of in situ elastic deformation of human enamel based on photoelastic and diffraction analysis of stresses and strains.

Human enamel is a typical hierarchical mineralized tissue with a two-level composite structure. To date, few studies have focused on how the mechanical behaviour of this tissue is affected by both the rod orientation at the microscale and the preferred orientation of mineral crystallites at the nanoscale. In this study, wide-angle X-ray scattering was used to determine the internal lattice strain response of human enamel samples (with differing rod directions) as a function of in situ uniaxial compressive loading.

Hierarchical modelling of elastic behaviour of human enamel based on synchrotron diffraction characterisation.

Human enamel is a hierarchical mineralized tissue with a two-level composite structure. Few studies have focused on the structure-mechanical property relationship and its link to the multi-scale architecture of human enamel, whereby the response to mechanical loading is affected not only by the rod distribution at micro-scale, but also strongly influenced by the mineral crystallite shape, and spatial arrangement and orientation. In this study, two complementary synchrotron X-ray diffraction techniques, wide and small angle X-ray scattering (WAXS/SAXS) were used to obtain multi-scale quantitative information about the structure and deformation response of human enamel to in situ uniaxial compressive loading.

Multiscale modelling and diffraction-based characterization of elastic behaviour of human dentine.

Human dentine is a hierarchical mineralized tissue with a two-level composite structure, with tubules being the prominent structural feature at a microlevel, and collagen fibres decorated with hydroxyapatite (HAp) crystallite platelets dominating the nanoscale. Few studies have focused on this two-level structure of human dentine, where the response to mechanical loading is thought to be affected not only by the tubule volume fraction at the microscale, but also by the shape and orientation distribution of mineral crystallites, and their nanoscale spatial arrangement and alignment. In this paper, in situ elastic strain evolution within HAp in dentine subjected to uniaxial compressive loading along both longitudinal and transverse directions was characterized simultaneously by two synchrotron X-ray scattering techniques: small- and wide-angle X-ray scattering (SAXS and WAXS, respectively).

High-resolution high-efficiency X-ray imaging system based on the in-line Bragg magnifier and the Medipix detector.

The performance of a recently developed full-field X-ray micro-imaging system based on an in-line Bragg magnifier is reported. The system is composed of quasi-channel-cut crystals in combination with a Medipix single-photon-counting detector. A theoretical and experimental study of the imaging performance of the crystals-detector combination and a comparison with a standard indirect detector typically used in high-resolution X-ray imaging schemes are reported.

Self-assembly of the perfluoroalkyl-alkane F14H20 in ultrathin films.

Scanning force microscopy on monomolecular films of eicosylperfluorotetradecane, F(CF(2))(14)(CH(2))(20)H, on mica, silicon oxide, or water revealed spontaneous organization to well-defined nanoscopic ribbon and spiral or toroidal superstructures. Whether ribbons or nanospirals were formed depended on the solvent from which the molecular monofilm was cast. Ribbons were observed when a hydrocarbon or a perfluorocarbon solvent was used, e.

Modelling the stratum corneum lipid organisation with synthetic lipid mixtures: the importance of synthetic ceramide composition.

Cholesterol (CHOL), free fatty acids (FFA) and nine classes of ceramides (CER1-CER9) form the main constituents of the intercellular lipid lamellae in stratum corneum (SC), which regulate the skin barrier function. Both the presence of a unique 13-nm lamellar phase, of which the formation depends on the presence of CER1, and its dense lateral packing are characteristic for the SC lipid organisation. The present study focuses on the lipid organisation in mixtures prepared with CHOL, FFA and a limited number of synthetic CER, namely CER1, CER3 and bovine brain CER type IV (SigmaCERIV).

Novel lipid mixtures based on synthetic ceramides reproduce the unique stratum corneum lipid organization.

Lipid lamellae present in the outermost layer of the skin protect the body from uncontrolled water loss. In human stratum corneum (SC), two crystalline lamellar phases are present, which contain mostly cholesterol, free fatty acids, and nine types of free ceramides. Previous studies have demonstrated that the SC lipid organization can be mimicked with model mixtures based on isolated SC lipids.

Surface and bulk elasticity determined fluctuation regimes in smectic membranes.

We report combined x-ray photon correlation spectroscopy (XPCS) and neutron spin echo (NSE) measurements of the layer-displacement fluctuations in smectic liquid-crystal membranes in the range from 10 ns to 10 micros. NSE reveals a new regime, determined by bulk elasticity, in which relaxation times decrease with the wave vector of the fluctuations. XPCS probes slower surface-tension-dominated relaxation times, independent of the wave vector.

Transfection mediated by gemini surfactants: engineered escape from the endosomal compartment.

The structure of the lipoplex formed from DNA and the sugar-based cationic gemini surfactant 1, which exhibits excellent transfection efficiency, has been investigated in the pH range 8.8-3.0 utilizing small-angle X-ray scattering (SAXS) and cryo-electron microscopy (cryo-TEM).

Are metastable, precrystallisation, density-fluctuations a universal phenomena?

In-situ observations of crystallisation in minerals and organic polymers have been made by simultaneous, time-resolved small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) techniques. In isotactic polypropylene slow quiescent crystallisation shows the onset of large scale ordering prior to crystal growth. Rapid crystallisations studied by melt extrusion indicate the development of well resolved oriented SAXS patterns associated with long range order before the development of crystalline peaks in the WAXS region.