Study on the fluidity of foamed alkali-activated slag cementitious material (AASCM).

This study aims to investigate the evolution patterns of fluidity and rheological properties of AASCM under varying dosages of foaming agent and particle sizes of filling aggregate. The flow characteristics of AASCM are significantly affected by the filling aggregate's size and the foaming agent's dosage. Specifically, an increase in filling aggregate size (D(4,3) ϵ [26 μm, 69 μm]) enhances the fluidity of foamed AASCM, while an increase in foaming agent dosage reduces fluidity.

Experimental Investigation of CO-Induced Silica Gel as the Water Blocking Grout Effect of Aquifer Ions.

This study aimed to prevent water flow in microcracks and simultaneously achieve CO capture during grouting (CCG). Using sodium silicate (SS) as the primary material, the microcracks were grouted by a two-step approach. The low-initial-viscosity (5 mPa s) SS was first saturated within the microcracks followed by CO injection at 2 MPa.

Formation Damage Induced by Water-Based Alumina Nanofluids during Enhanced Oil Recovery: Influence of Postflush Salinity.

Injecting nanofluids (NFs) has been proven to be a potential method to enhance oil recovery. Stranded oil is produced by wettability alteration where nanoparticles form a wedge film on pore wall surfaces, which is thought to shrink the pore space of the reservoir. Furthermore, ensuring the stability of the injected NF during the application is a major challenge.