Synthesis and Characterisation of Porous Titania-Silica Composite Aerogel for NO(x) and Acetaldehyde Removal.

In this study, the synthesis of porous titania-silica (TiO2-SiO2) composite aerogel at ambient pressure by using non-hazardous chemicals as a source of silica was investigated. TiO2-SiO2 composite aerogels were characterised and their photocatalytic performances were investigated for the removal efficiency of acetaldehyde and NO(x) under UV light. Results showed that porous composite aerogel with aggregated morphology, high surface area and an increased mesoporosity were formed.

Adsorption and Photocatalytic Degradation of Methylene Blue Using Potassium Polytitanate and Solar Simulator.

Solar photocatalytic degradation of organic water pollutants can be used to degrade toxic organic pollutants in water. In this study, potassium titanate nanofibres were synthesized by an aqueous peroxide route at high pH and examined as photocatalysts for photodegradation of methylene blue (MB) using a solar simulator. Initially, MB was adsorbed on the surface of potassium polytitanates to achieve adsorption equilibrium before the photocatalysts were illuminated using solar simulator.

Adsorption Behavior of Pb(II) Onto Potassium Polytitanate Nanofibres.

Potassium polytitanate nanofibres prepared by a hydrothermal method were investigated for their possible application in removing toxic metals from aqueous solution. Particular attention was paid to employing the titanate as a novel effective adsorbent for the removal of Pb(II). Batch adsorption experiments demonstrated that the adsorption was influenced by various conditions such as solution pH, adsorbent dosage and initial Pb(II) concentration.

Synthesis and Characterisation of Silica-Modified Titania for Photocatalytic Decolouration of Crystal Violet.

In the past few years, silica-modified titania has drawn increasing attention due to their special properties making them ideal candidates for a wide range of applications. In this study, we report a novel method for the synthesis of silica-modified titania by a sol-gel method using sodium silicate solution (1 M). The hydrolysis and condensation reactions of titanium dioxide (TiO2, Degussa Aeroxide® P25) in sodium silicate solution proceeded with citric acid (3 M) as a catalyst.

Synthesis and characterisation of potassium polytitanate for photocatalytic degradation of crystal violet.

Potassium titanate nanostructures were synthesised by hydrothermal treatment of TiO2 (P25) in KOH and H2O2. As-produced powders were characterised by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray diffraction, and nitrogen adsorption-desorption methods. Longitudinally-oriented-wire-like structures with a length up to several micrometres and diameters ranging from 10 to 30 nm were obtained.

Preparation of iron-doped titania from flocculated sludge with iron-titanium composite coagulant.

The main drawback of flocculation process with dye wastewater is the large amount of unrecyclable sludge which needs disposal. A novel process using Ti-salt flocculation to purify wastewater was developed to produced sludge that can be calcined to produce titania. In this study, iron-doped TiO2 nanomaterial was successfully produced from sludge obtained by the flocculation of dye wastewater with a composite floculant including TiCl4 and FeSO4.

Adsorption and photocatalytic degradation of methylene blue over hydrogen-titanate nanofibres produced by a peroxide method.

In this study, Degussa P25 TiO2 was partially dissolved in a mixture of hydrogen peroxide and sodium hydroxide at high pH. The fabrication of nanofibres proceeded by the hydrothermal treatment of the solution at 80 °C. This was followed by acid wash in HCl at pH 2 for 60 min, which resulted in the formation of hydrogen-titanate nanofibres.

Blended fertilizers as draw solutions for fertilizer-drawn forward osmosis desalination.

In fertilizer-drawn forward osmosis (FDFO) desalination, the final nutrient concentration (nitrogen, phosphorus, potassium (NPK)) in the product water is essential for direct fertigation and to avoid over fertilization. Our study with 11 selected fertilizers indicate that blending of two or more single fertilizers as draw solution (DS) can achieve significantly lower nutrient concentration in the FDFO product water rather than using single fertilizer alone. For example, blending KCl and NH(4)H(2)PO(4) as DS can result in 0.

Effects of different irrigation, drying and production scenarios on the productivity, postharvest quality and economic feasibility of Origanum syriacum, a species typically over-collected from the wild in Lebanon.

Background: The potential of Origanum syriacum L. to become a cultivated crop in Lebanon rather than being harvested from the wild was investigated at the production, postharvest and economic levels. Three irrigation schemes were tested on growth parameters of cultivated oregano plants.