Biocomposite Foams with Multimodal Cellular Structures Based on Cork Granulates and Microwave Processed Egg White Proteins.

In an effort to reduce greenhouse gas emission, reduce the consumption of natural resources, and increase the sustainability of biocomposite foams, the present study focuses on the recycling of cork processing waste for the production of lightweight, non-structural, fireproof thermal and acoustic insulating panels. Egg white proteins (EWP) were used as a matrix model to introduce an open cell structure via a simple and energy-efficient microwave foaming process. Samples with different compositions (ratio of EWP and cork) and additives (eggshells and inorganic intumescent fillers) were prepared with the aim of correlating composition, cellular structures, flame resistance, and mechanical properties.

Bacteria as sensors: Real-time NMR analysis of extracellular metabolites detects sub-lethal amounts of bactericidal molecules released from functionalized materials.

Background: Cells exposed to stress factors experience time-dependent variations of metabolite concentration, acting as reliable sensors of the effective concentration of drugs in solution. NMR can detect and quantify changes in metabolite concentration, thus providing an indirect estimate of drug concentration. The quantification of bactericidal molecules released from antimicrobial-treated biomedical materials is crucial to determine their biocompatibility and the potential onset of drug resistance.

Polyurethane-Based Coatings with Promising Antibacterial Properties.

In coatings technology, the possibility of introducing specific characteristics at the surface level allows for the manufacture of medical devices with efficient and prolonged antibacterial properties. This efficiency is often achieved by the use of a small amount of antibacterial molecules, which can fulfil their duty while limiting eventual releasing problems. The object of this work was the preparation and characterization of silver, titanium dioxide and chitosan polyurethane-based coatings.

Marine Collagen from Alternative and Sustainable Sources: Extraction, Processing and Applications.

Due to its unique properties, collagen is used in the growing fields of pharmaceutical and biomedical devices, as well as in the fields of nutraceuticals, cosmeceuticals, food and beverages. Collagen also represents a valid resource for bioplastics and biomaterials, to be used in the emerging health sectors. Recently, marine organisms have been considered as promising sources of collagen, because they do not harbor transmissible disease.

Polyurethane-Based Composites: Effects of Antibacterial Fillers on the Physical-Mechanical Behavior of Thermoplastic Polyurethanes.

The challenge to manufacture medical devices with specific antibacterial functions, and the growing demand for systems able to limit bacterial resistance growth, necessitates the development of new technologies which can be easily produced at an industrial level. The object of this work was the study and the development of silver, titanium dioxide, and chitosan composites for the realization and/or implementation of biomedical devices. Thermoplastic elastomeric polyurethane was selected and used as matrix for the various antibacterial functions introduced during the processing phase (melt compounding).

Greener Nanocomposite Polyurethane Foam Based on Sustainable Polyol and Natural Fillers: Investigation of Chemico-Physical and Mechanical Properties.

Nowadays, the chemical industry is looking for sustainable chemicals to synthesize nanocomposite bio-based polyurethane foams, PUs, with the aim to replace the conventional petrochemical precursors. Some possibilities to increase the environmental sustainability in the synthesis of nanocomposite PUs include the use of chemicals and additives derived from renewable sources (such as vegetable oils or biomass wastes), which comprise increasingly wider base raw materials. Generally, sustainable PUs exhibit chemico-physical, mechanical and functional properties, which are not comparable with those of PUs produced from petrochemical precursors.

Lightweight Poly(ε-Caprolactone) Composites with Surface Modified Hollow Glass Microspheres for Use in Rotational Molding: Thermal, Rheological and Mechanical Properties.

In this work, novel composites based on poly(ε-caprolactone) (PCL) were prepared and characterized in terms of morphological, thermal, rheological and mechanical properties. Hollow glass microspheres (HGM), alone or surface modified by treatment with (3-aminopropyl)triethoxysilane (APTES) in order to enhance the compatibility between the inorganic particles and the polymer matrix, were used to obtain lightweight composites with improved properties. The silanization treatment implies a good dispersion of filler particles in the matrix and an enhanced filler⁻polymer adhesion.

Vegetable Tannin as a Sustainable UV Stabilizer for Polyurethane Foams.

A vegetable tannin, a flavonoid-type natural polyphenolic compound, was used to promote the stabilization of polyurethane foams against UV radiation. Several polyurethane foams were synthesized by using an isocyanate, and a mixture of ethoxylated cocoalkyl amine and vegetable tannin. The content of vegetable tannin was varied from 0 to 40 wt %.

Enhancing the EMI shielding of natural rubber-based supercritical CO foams by exploiting their porous morphology and CNT segregated networks.

Natural rubber/carbon nanotubes composite foams (F-NR/CNTs) with high electrical conductivity and excellent electromagnetic interference (EMI) performance were developed through a multi-step process including: (a) CNTs assembled on natural rubber latex particles, (b) pre-crosslinking of natural rubber, (c) supercritical carbon dioxide foaming of pre-crosslinked composite samples and (d) post-crosslinking of foamed composite samples. A closed-cell porous structure and a segregated CNT network are clearly observed in the resulting foams. Due to this morphology, F-NR/CNTs exhibit low density, good mechanical properties, and high electrical conductivity.

Characterization of sustainable polyhydroxyls, produced from bio-based feedstock, and polyurethane and copolymer urethane-amide foams.

This manuscript presents data related to the research article entitled "Synthesis and characterization of sustainable polyurethane foams based on polyhydroxyls with different terminal groups" (DOI: 10.1016/j.polymer.

Microcellular foaming of arabinoxylan and PEGylated arabinoxylan with supercritical CO.

In this study, arabinoxylan extracted from barley husks was reacted with polyethylene glycol (PEG) of various molecular weights to introduce an internal plasticizer into the polymer matrix. A successful PEGylation reaction was identified using FTIR and elemental analysis. Thermal and mechanical properties were studied using dynamic mechanical analysis, which revealed that the attachment of PEG chains reduced the glass transition temperature by up to 25°C.

Differences between graphene and graphene oxide in gelatin based systems for transient biodegradable energy storage applications.

A comparison between graphene flakes and graphene oxide as filler in gelatin based systems for low-cost transient biodegradable energy storage applications has been carried out. The two bio-composites have been prepared and characterized by rheological measurements, cyclic voltammetry measurements, chronopotentiometry measurements and impedance spectroscopy. Differences in dielectric and mechanical properties have been correlated to the different structural organizations determinate by the hydrophobic/hydrophilic character of the used filler.

Light irradiation tuning of surface wettability, optical, and electric properties of graphene oxide thin films.

In this work the preparation of flexible polymeric films with controlled electrical conductivity, light transmission and surface wettability is reported. A drop casted graphene oxide thin film is photo-reduced at different levels by UV light or laser irradiation. Optical microscopy, IR spectroscopy, electrical characterization, Raman spectroscopy and static water contact angle measurements are used in order to characterize the effects of the various reduction methods.

Osteogenic differentiation of CD271(+) cells from rabbit bone marrow cultured on three phase PCL/TZ-HA bioactive scaffolds: comparative study with mesenchymal stem cells (MSCs).

Tissue engineering is one of the major challenges of orthopedics and trauma surgery for bone regeneration. Biomaterials filled with mesenchymal stem cells (MSCs) are considered the most promising approach in bone tissue engineering. Furthermore, our previous study showed that the multi-phase poly [ε-caprolactone]/thermoplastic zein-hydroxyapatite (PCL/TZ-HA) biomaterials improved rabbit (r) MSCs adhesion and osteoblast differentiation, thus demonstrating high potential of this bioengineered scaffold for bone regeneration.

Supercritical CO2 foaming of thermoplastic materials derived from maize: proof-of-concept use in mammalian cell culture applications.

Background: Foams are high porosity and low density materials. In nature, they are a common architecture. Some of their relevant technological applications include heat and sound insulation, lightweight materials, and tissue engineering scaffolds.

Effect of supramolecular structures on thermoplastic zein-lignin bionanocomposites.

The effect of alkaline lignin (AL) and sodium lignosulfonate (LSS) on the structure of thermoplastic zein (TPZ) was studied. Protein structural changes and the nature of the physical interaction between lignin and zein were investigated by means of X-ray diffraction and Fourier transform infrared (FT-IR) spectroscopy and correlated with physical properties. Most relevant protein structural changes were observed at low AL concentration, where strong H-bondings between the functional groups of AL and the amino acids in zein induced a destructuring of inter- and intramolecular interactions in α-helix, β-sheet, and β-turn secondary structures.

Design of bimodal PCL and PCL-HA nanocomposite scaffolds by two step depressurization during solid-state supercritical CO(2) foaming.

This communication reports the design and fabrication of porous scaffolds of poly(ε-caprolactone) (PCL) and PCL loaded with hydroxyapatite (HA) nanoparticles with bimodal pore size distributions by a two step depressurization solid-state supercritical CO(2) (scCO(2) ) foaming process. Results show that the pore structure features of the scaffolds are strongly affected by the thermal history of the starting polymeric materials and by the depressurization profile. In particular, PCL and PCL-HA nanocomposite scaffolds with bimodal and uniform pore size distributions are fabricated by quenching molten samples in liquid N(2) , solubilizing the scCO(2) at 37 °C and 20 MPa, and further releasing the blowing agent in two steps: (1) from 20 to 10 MPa at a slow depressurization rate, and (2) from 10 MPa to the ambient pressure at a fast depressurization rate.

Processing/structure/property relationship of multi-scaled PCL and PCL-HA composite scaffolds prepared via gas foaming and NaCl reverse templating.

In this study, we investigated the processing/structure/property relationship of multi-scaled porous biodegradable scaffolds prepared by combining the gas foaming and NaCl reverse templating techniques. Poly(ε-caprolactone) (PCL), hydroxyapatite (HA) nano-particles and NaCl micro-particles were melt-mixed by selecting different compositions and subsequently gas foamed by a pressure-quench method. The NaCl micro-particles were finally removed from the foamed systems in order to allow for the achievement of the multi-scaled scaffold pore structure.

Design of novel three-phase PCL/TZ-HA biomaterials for use in bone regeneration applications.

The design of bioactive scaffold materials able to guide cellular processes involved in new-tissue genesis is key determinant in bone tissue engineering. The aim of this study was the design and characterization of novel multi-phase biomaterials to be processed for the fabrication of 3D porous scaffolds able to provide a temporary biocompatible substrate for mesenchymal stem cells (MSCs) adhesion, proliferation and osteogenic differentiation. The biomaterials were prepared by blending poly(epsilon-caprolactone) (PCL) with thermoplastic zein (TZ), a thermoplastic material obtained by de novo thermoplasticization of zein.

Design of porous polymeric scaffolds by gas foaming of heterogeneous blends.

One of the challenges in tissue engineering scaffold design is the realization of structures with a pre-defined multi-scaled porous network. Along this line, this study aimed at the design of porous scaffolds with controlled porosity and pore size distribution from blends of poly(epsilon-caprolactone) (PCL) and thermoplastic gelatin (TG), a thermoplastic natural material obtained by de novo thermoplasticization of gelatin. PCL/TG blends with composition in the range from 40/60 to 60/40 (w/w) were prepared by melt mixing process.

Engineered mu-bimodal poly(epsilon-caprolactone) porous scaffold for enhanced hMSC colonization and proliferation.

The use of scaffold-based strategies in the regeneration of biological tissues requires that the design of the microarchitecture of the scaffold satisfy key microstructural and biological requirements. Here, we examined the ability of a porous poly(epsilon-caprolactone) (PCL) scaffold with novel bimodal-micron scale (mu-bimodal) porous architecture to promote and guide the in vitro adhesion, proliferation and three-dimensional (3-D) colonization of human mesenchymal stem cells (hMSCs). The mu-bimodal PCL scaffold was prepared by a combination of gas foaming (GF) and selective polymer extraction (PE) from co-continuous blends.

Open-pore biodegradable foams prepared via gas foaming and microparticulate templating.

Open-pore biodegradable foams with controlled porous architectures were prepared by combining gas foaming and microparticulate templating. Microparticulate composites of poly(epsilon-caprolactone) (PCL) and micrometric sodium chloride particles (NaCl), in concentrations ranging from 70/30 to 20/80 wt.-% of PCL/NaCl were melt-mixed and gas-foamed using carbon dioxide as physical blowing agent.

Viscoelastic behavior of composite ligament prostheses.

Despite the compelling need for artificial connective tissue replacements for orthopedic applications, to date, there is no material which can adequately reproduce the mechanical behavior of natural tissue with necessary long-term endurance. In this work, we introduce a novel soft composite material as a more suitable candidate for connective tissue replacement. The material proposed is based on a hydrogel-polymer matrix reinforced with poly(ethylene terephthalate) fibers wound helically to mimic the architecture of the collagen fibers in natural tissue.

Synthesis and characterization of a new interpenetrated poly(2-hydroxyethylmethacrylate)-gelatin composite polymer.

Poly(2-hydroxyethylmethacrylate) [poly(HEMA)] is a widely used biomaterial which does not allow cell adhesion and growth on its surface, limiting its use in biomedical applications in which cell cohesion is detrimental. We have prepared a poly(HEMA)-gelatin composite hydrogel using a sequential interpenetrating polymer network technique. The properties of this material were compared with poly(HEMA) freeze-dried sponges in terms of morphology, mechanical properties and biocompatibility.

Mechanical behaviour of composite artificial tendons and ligaments.

The mechanical behaviour of a soft composite material based on a hydrogel polymer matrix reinforced with bundles of poly(ethylene terephthalate) (PET) fibres is analysed. The composite reproduces the typical J-shaped stress-strain curves displayed by natural tendons and ligaments. The lamination composite theory was used to investigate the role of the fibres and the matrix properties, as well as the role of the winding angle and the volumetric fraction of fibres, on the mechanical response of this system.