Nano-Plasticity of an Electrified Ionic Liquid/Electrode Interface: Uncovering Hard-Soft Structuring via Controlled Metal Fill Factor.

Ionic liquids (ILs) nanostructuring at electrified interfaces is of both fundamental and practical interest as these materials are increasingly gaining prominence in energy storage and conversion processes. However, much remains unresolved about IL potential-controlled (re)organization under highly polarized interfaces, mostly due to the difficulty of selectively probing both the distal and proximal surface layers of adsorbed ions. In this work, the structural dynamics of the innermost layer (<10 nm from the surface) were independently interrogated from that of the ionic layers in the sub-surface region (>100 nm from the surface), using an infrared (IR) spectroscopy approach.

Oxygen Vacancies Alter Methanol Oxidation Pathways on NiOOH.

A thorough comprehension of the mechanism underlying the methanol oxidation reaction (MOR) on Ni-based catalysts is critical for future electrocatalytic design and development. However, the mechanism of MOR on these materials remains a matter of controversy. Herein, we combine in situ surface-enhanced infrared absorption spectroscopy (SEIRAS) and density functional theory (DFT) calculations to identify the active sites and determine the mechanism of MOR on monometallic Ni-based catalysts in alkaline media.

Microfabrication Process Development for a Polymer-Based Lab-on-Chip Concept Applied in Attenuated Total Reflection Fourier Transform Infrared Spectroelectrochemistry.

Micro electro-mechanical systems (MEMS) combining sensing and microfluidics functionalities, as are common in Lab-on-Chip (LoC) devices, are increasingly based on polymers. Benefits of polymers include tunable material properties, the possibility of surface functionalization, compatibility with many micro and nano patterning techniques, and optical transparency. Often, additional materials, such as metals, ceramics, or silicon, are needed for functional or auxiliary purposes, e.

Diamonds in the Rough: Direct Surface Enhanced Infrared Spectroscopic Evidence of Nitrogen Reduction on Boron-Doped Diamond Supported Metal Catalysts.

In situ investigations of electrocatalytic processes of increasing societal interest such as the nitrogen reduction reaction (NRR) require aggressive experimental conditions that are not readily compatible with surface sensitive techniques such as attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS). A method for performing ATR-SEIRAS studies at very negative potentials where conventional IR-active films delaminate and fail is reported. The method relies on a thin film of very robust boron-doped diamond deposited on a micromachined Si wafer, which provides extended mid-IR transparency at long wavelengths.

Chemical Imaging of Mass Transport Near the No-Slip Interface of a Microfluidic Device using Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy.

Mass transport in geometrically confined environments is fundamental to microfluidic applications. Measuring the distribution of chemical species on flow requires the use of spatially resolved analytical tools compatible with microfluidic materials and designs. Here, the implementation of an attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) imaging (macro-ATR) approach for chemical mapping of species in microfluidic devices is described.

Surface sensitive infrared spectroelectrochemistry using palladium electrodeposited on ITO-modified internal reflection elements.

Palladium nanoparticles have been electrodeposited on the surfaces of conductive indium tin oxide (ITO) modified silicon internal reflection elements. The resulting films are shown to be excellent platforms for attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS) studies of palladium surfaces. Monitoring the mid-infrared reflectivity of the interface during the constant potential electrodepostion of a Pd precursor reveals a distinct and reproducible minimum that corresponds to the onset of the electronic percolation threshold of the deposited metal islands as confirmed by scanning electron microscopy.

Probing Heterogeneity in Attenuated Total Reflection Surface-Enhanced Infrared Absorption Spectroscopy (ATR-SEIRAS) Response with Synchrotron Infrared Microspectroscopy.

The heterogeneity of metal island films electrodeposited on conductive metal oxide modified internal reflection elements is shown to provide a variable attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) response. A self-assembled monolayer of a ferrocene-terminated thiol monolayer (FcCSH) was formed on the gold islands covering a single substrate, which was measured using both a conventional spectrometer and a custom-built horizontal microscope. Cyclic voltammetry and ATR-SEIRAS results reveal that the FcCSH-modified substrate undergoes a reversible electron transfer and an associated re-orientation of both the ferrocene/ferrocenium headgroup and the hydrocarbon backbone.

Microsecond Resolved Infrared Spectroelectrochemistry Using Dual Frequency Comb IR Lasers.

A dual infrared frequency comb spectrometer with heterodyne detection has been used to perform time-resolved electrochemical attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). The measurement of the potential dependent desorption of a monolayer of a pyridine derivative (4-dimethylaminopyridine, DMAP) with time resolution as high as 4 μs was achieved without the use of step-scan interferometry. An analysis of the detection limit of the method as a function of both time resolution and measurement coadditions is provided and compared to step-scan experiments of an equivalent system.

Optimization of a Commercial Variable Angle Accessory for Entry Level Users of Electrochemical Attenuated Total Reflection Surface-Enhanced Infrared Absorption Spectroscopy (ATR-SEIRAS).

An evaluation of several experimental aspects that can optimize electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) performance using a commercially available, specular reflection accessory is provided. A comparison of different silicon single-bounce internal reflection elements (IREs) is made with emphasis on different face-angled crystal (FAC) options. Selection of optimal angle of incidence for maximizing signal and minimizing noise is shown to require consideration of the optical throughput of the accessory, reflection losses at the crystal surfaces, and polarization effects.

Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectromicroscopy Using Synchrotron Radiation and Micromachined Silicon Wafers for Microfluidic Applications.

A custom-designed optical configuration compatible with the use of micromachined multigroove internal reflection elements (μ-groove IREs) for attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and imaging applications in microfluidic devices is described. The μ-groove IREs consist of several face-angled grooves etched into a single, monolithic silicon chip. The optical configuration permits individual grooves to be addressed by focusing synchrotron sourced IR light through a 150 µm pinhole aperture, restricting the beam spot size to a dimension smaller than that of the groove walls.

Beyond Simple Cartoons: Challenges in Characterizing Electrochemical Biosensor Interfaces.

Design and development of surface-based biosensors is challenging given the multidisciplinary nature of this enterprise, which is certainly the case for electrochemical biosensors. Self-assembly approaches are used to modify the surface with capture probes along with electrochemical methods for detection. Complex surface structures are created to improve the probe-target interaction.

Electrochemical ATR-SEIRAS Using Low-Cost, Micromachined Si Wafers.

Thin, micromachined Si wafers, designed as internal reflection elements (IREs) for attenuated total reflectance infrared spectroscopy, are adapted to serve as substrates for electrochemical ATR surface enhanced infrared absorption spectroscopy (ATR-SEIRAS). The 500 μm thick wafer IREs with groove angles of 35° are significantly more transparent at long mid-IR wavelengths as compared to conventional large Si hemisphere IREs. The appeal of greater transparency is mitigated by smaller optical throughput at larger grazing angles and steeper angles of incidence at the reflecting plane that reduce the enhancement factor.

Femtomole Infrared Spectroscopy at the Electrified Metal-Solution Interface.

Characterization of surface adsorbed species using infrared (IR) spectroscopy provides valuable information concerning interfacial chemical and physical processes. However, in situ infrared studies of surface areas approaching the IR diffraction limit, such as micrometer scale electrodes, require a hitherto unrealized means to obtain high signal-to-noise (S/N) spectra from femtomole quantities of adsorbed molecules. A major methodological breakthrough is described that couples the high brilliance of synchrotron-sourced infrared microscopy with attenuated total reflection surface enhanced infrared spectroscopy (ATR-SEIRAS).

Surface-Enhanced Infrared Spectroscopy and Neutron Reflectivity Studies of Ubiquinone in Hybrid Bilayer Membranes under Potential Control.

Surface-enhanced infrared adsorption spectroscopy (SEIRAS) and neutron reflectometry (NR) were employed to characterize ubiquinone (UQ) containing hybrid bilayer membranes. The biomimetic membrane was prepared by fusing phospholipid vesicles on a hydrophobic octadecanethiol monolayer self-assembled on a thin gold film. Using SEIRAS, the assembly of the membrane is monitored in situ.

Surface Enhanced Infrared Studies of 4-Methoxypyridine Adsorption on Gold Film Electrodes.

This work uses electrochemical surface sensitive vibrational spectroscopy to characterize the adsorption of a known metal nanoparticle stabilizer and growth director, 4-methoxypyridine (MOP). Surface enhanced infrared absorption spectroscopy (SEIRAS) is employed to study the adsorption of 4-methoxypyridine on gold films. Experiments are performed under electrochemical control and in different electrolyte acidities to identify both the extent of protonation of the adsorbed species as well as its orientation with respect to the electrode surface.

Electrochemical Investigations of 4-Methoxypyridine Adsorption on Au(111) Predict Its Suitability for Stabilizing Au Nanoparticles.

A thermodynamic analysis of the adsorption of 4-methoxypyridine (MOP) on Au(111) surfaces is presented in an effort to determine its propensity to stabilize metal nanoparticles. The adsorption of MOP is compared and contrasted to the adsorption of 4-dimethylaminopyridine (DMAP), the latter of which is well-known to form stable Au nanoparticles. Electrochemical studies show that MOP, like most pyridine derivatives, can exhibit two different adsorption states.

Step-scan IR spectroelectrochemistry with ultramicroelectrodes: nonsurface enhanced detection of near femtomole quantities using synchrotron radiation.

The result of interfacing step-scan spectroelectrochemistry with an IR microscope and synchrotron infrared (SIR) radiation is provided here. An external reflectance cell containing a 25 μm gold ultramicroelectrode is employed to achieve an electrochemical time constant less than one microsecond. The use of a prototypical electrochemical system, i.

Electrochemical studies of capping agent adsorption provide insight into the formation of anisotropic gold nanocrystals.

The ability of the 4-dimethylaminopyridine (DMAP) to stabilize and control the formation of anisotropic gold nanocrystals produced via the borohydride reduction of gold(III) salts is reported here. Electrochemical measurements of DMAP electrosorption on different low-index single crystal and polycrystalline electrodes is provided and shows a propensity for DMAP to preferentially adsorb on {100} facets. Measuring the electrochemical potential during nanocrystal formation shows that experimental conditions can easily be manipulated so that the growth of nanoseeds occurs at potentials that support preferential DMAP adsorption on {100} surfaces giving rise to highly anisotropic nanocrystals (nanorods, bipyramids, and nanopods).

[1.1]Ferrocenophanes and bis(ferrocenyl) species with aluminum and gallium as bridging elements: synthesis, characterization, and electrochemical studies.

Salt-metathesis reactions between dilithioferrocene (Li(2)fc·2/3tmeda) and intramolecularly coordinated aluminum and gallium species RECl(2) [R = 5-Me(3)Si-2-(Me(2)NCH(2))C(6)H(3); E = Al (2a), Ga (2b); and R = (2-C(5)H(4)N)Me(2)SiCH(2); E = Al (3a), Ga (3b)] gave respective [1.1]ferrocenophanes ([1.1]FCPs).

Quaternary ammonium bromide surfactant adsorption on low-index surfaces of gold. 2. Au(100) and the role of crystallographic-dependent adsorption in the formation of anisotropic nanoparticles.

A qualitative and quantitative description of the coadsorption of a quaternary ammonium bromide surfactant on Au(100) has been determined using electrochemical techniques. Cyclic voltammetry reveals that both the cationic surfactant ion and its halide counterion are adsorbed on the surface of unreconstructed Au(100) over a wide range of electrode potentials or charge densities. The relative Gibbs excesses of the cationic and anionic components of octyltrimethylammonium (OTA(+)) bromide have been determined using the thermodynamics of ideally polarized electrodes.

Quaternary ammonium bromide surfactant adsorption on low-index surfaces of gold. 1. Au(111).

The coadsorption of the anionic and cationic components of a model quaternary ammonium bromide surfactant on Au(111) has been measured using the thermodynamics of an ideally polarized electrode. The results indicate that both bromide and trimethyloctylammonium (OTA(+)) ions are coadsorbed over a broad range of the electrical state of the gold surface. At negative polarizations, the Gibbs surface excess of the cationic surfactant is largely unperturbed by the presence of bromide ions in solution.

Interface for time-resolved electrochemical infrared microspectroscopy using synchrotron infrared radiation.

A description of a coupled electrochemical and spectrometer interface using synchrotron infrared radiation is provided. The interface described allows for the precise and accurate timing needed for time-resolved IR spectroscopic studies of electrochemical systems. The overall interface uses a series of transistor-transistor logic trigger signals generated from the commercial FTIR spectrometer to regulate the recording of control, electrochemical, and IR signals with reproducible and adjustable timing.

Synchrotron infrared radiation for electrochemical external reflection spectroscopy: a case study using ferrocyanide.

Synchrotron infrared radiation has been successfully coupled through an infrared (IR) microscope to a thin-cavity external reflectance cell to study the diffusion controlled redox of a ferrocyanide solution. Excellent signal-to-noise ratios were achieved even at aperture settings close to the diffraction limit. Comparisons of noise levels as a function of aperture size demonstrate that this can be attributed to the high brilliance of synchrotron radiation relative to a conventional thermal source.

Step-wise proton-coupled electron transfer extended to aminobenzoquinone modified monolayers.

The step-wise proton coupled electron transfer (SW-PCET) model has been expanded to describe instances where three protons are transferred with either one or two electrons. Expressions have been derived describing the pH dependence of the apparent formal potential, apparent standard rate constant, apparent transfer coefficient, and reaction pathway. The expressions can be applied to both Marcus density of states theory as well as Butler-Volmer kinetics depending on the assumptions made about the individual transfer coefficients.

Photophysics of self-assembled zinc porphyrin-bidentate diamine ligand complexes.

The effects of complexation--by bidentate nitrogen-containing ligands such as pyrazine and 4,4'-bipyridine commonly used for porphyrin self-assembly--on the photophysics of the model metalloporphyrin, ZnTPP, are reported. Ligation to form the 5-coordinate species introduces an intramolecular charge transfer (ITC) state that, depending on the oxidation and reduction potentials of the electron donor and acceptor, can become involved in the excited state relaxation processes. For ZnTPP, ligation with pyridine has little effect on excited state relaxation following either Q-band or Soret band excitation.