Spatially resolved diagnostics for optimization of large ion beam sources.

Giant negative ion sources for neutral beam injectors deliver huge negative ion currents, thanks to their multi-beamlet configuration. As the single-beamlet optics defines the transmission losses along the beamline, the extraction of a similar current for all beamlets is extremely desirable, in order to facilitate the beam source operation (i.e.

Long-pulse diagnostic calorimeter for the negative ion source testbed BATMAN upgrade.

The RF-driven negative ion source testbed BATMAN upgrade is being developed at IPP Garching in the framework of the ion source development for ITER and DEMO neutral beam injection systems. The testbed has recently been enhanced to allow for steady state operation with a focus on beam optics studies. The previous titanium sublimation pumps and inertial calorimeter limited the beam pulse length to about 6 s every 3 min.

Formation of large negative deuterium ion beams at ELISE.

Negative ion sources for neutral beam injection (NBI) in fusion experiments are based on the surface production of H or D on cesiated low work function surfaces. In the recent years, it was demonstrated at the large RF driven ion source of the ELISE (Extraction from a Large Ion Source Experiment) test facility that the requirements for the ITER NBI systems can be fulfilled by hydrogen. This is a big step toward the first operational period of ITER, planned for up to 2035.

Neutron measurements at the ELISE neutral beam test facility and implications for neutron based diagnostics at SPIDER.

Along the route to the development of a neutral beam injector for ITER, the Padua based Source for Production of Ion of Deuterium Extracted from Rf plasma (SPIDER) and megavolt ITER injector and concept advancement facilities will make use of neutron diagnostics to quantify the homogeneity of the neutral beam profile by measuring the map of the neutron emission from the beam dump with the close-contact neutron emission surface mapping (CNESM) system. Neutrons are here produced from beam-target reactions between the deuterium beam and the deuterons previously adsorbed in the calorimeter. In order to aid the interpretation of the diagnostic data, a dedicated experiment on neutron emission from beam-target reactions with beam parameters approaching those expected at SPIDER has been performed at the Extraction from a Large Ion Source Experiment (ELISE) neutral beam test facility.