Efficient intersystem crossing and tunable ultralong organic room-temperature phosphorescence via doping polyvinylpyrrolidone with polyaromatic hydrocarbons.

Polymer-based pure organic room-temperature phosphorescent materials have tremendous advantages in applications owing to their low cost, vast resources, and easy processability. However, designing polymer-based room-temperature phosphorescent materials with large Stokes shifts as key requirements in biocompatibility and environmental-friendly performance is still challenging. By generating charge transfer states as the gangplank from singlet excited states to triplet states in doped organic molecules, we find a host molecule (pyrrolidone) that affords charge transfer with doped guest molecules, and excellent polymer-based organic room-temperature phosphorescent materials can be easily fabricated when polymerizing the host molecule.

Comparison of Zirconia Implant Surface Modifications for Optimal Osseointegration.

Zirconia ceramic implants are commercially available from a rapidly growing number of manufacturers. Macroscopic and microscopic surface design and characteristics are considered to be key determining factors in the success of the osseointegration process. It is, therefore, crucial to assess which surface modification promotes the most favorable biological response.

Cellulose/GO monolith covered with Pd-Pt bimetallic nanocrystals for continuous-flow catalytic reduction of hexavalent chromium.

Cellulose monolith materials have interconnected open porous structures with very high porosity, making them attractive structures for use as support materials in heterogeneous catalysis applications. In this study, we developed a highly efficient and reusable continuous-flow reactor for Cr(VI) remediation by combining the advantageous features of cellulose monoliths with suitable reinforcement techniques. We fabricated a porous monolithic cellulose/graphene oxide (GO) composite with a continuous three-dimensional skeletal framework using the thermally induced phase separation technique.

Fully Printed, High-Temperature Micro-Supercapacitor Arrays Enabled by a Hexagonal Boron Nitride Ionogel Electrolyte.

The proliferation and miniaturization of portable electronics require energy-storage devices that are simultaneously compact, flexible, and amenable to scalable manufacturing. In this work, mechanically flexible micro-supercapacitor arrays are demonstrated via sequential high-speed screen printing of conductive graphene electrodes and a high-temperature hexagonal boron nitride (hBN) ionogel electrolyte. By combining the superlative dielectric properties of 2D hBN with the high ionic conductivity of ionic liquids, the resulting hBN ionogel electrolyte enables micro-supercapacitors with exceptional areal capacitances that approach 1 mF cm.

Enhanced LiMnO Thin-Film Electrode Stability in Ionic Liquid Electrolyte: A Pathway to Suppress Mn Dissolution.

Spinel-type lithium manganese oxide (LiMnO) cathodes suffer from severe manganese dissolution in the electrolyte, compromising the cyclic stability of LMO-based Li-ion batteries (LIBs). In addition to causing structural and morphological deterioration to the cathode, dissolved Mn ions can migrate through the electrolyte to deposit on the anode, accelerating capacity fade. Here, we examine single-crystal epitaxial LiMnO (111) thin-films using synchrotron X-ray diffraction and reflectivity to study the structural and interfacial evolution during cycling.

Screen-Printable Hexagonal Boron Nitride Ionogel Electrolytes for Mechanically Deformable Solid-State Lithium-Ion Batteries.

Ionogel electrolytes present several benefits for solid-state lithium-ion batteries including nonflammability, favorable electrochemical properties, and high thermal stability. However, limited processing methods are currently available for ionogel electrolytes, restricting their practical applications. Here, we present a screen-printable ionogel electrolyte formulation based on hexagonal boron nitride (hBN) nanoplatelets.

Layered Heterostructure Ionogel Electrolytes for High-Performance Solid-State Lithium-Ion Batteries.

Ionogel electrolytes based on ionic liquids and gelling matrices offer several advantages for solid-state lithium-ion batteries, including nonflammability, wide processing compatibility, and favorable electrochemical and thermal properties. However, the absence of ionic liquids that are concurrently stable at low and high potentials constrains the electrochemical windows of ionogel electrolytes and thus their high-energy-density applications. Here, ionogel electrolytes with a layered heterostructure are introduced, combining high-potential (anodic stability: >5 V vs Li/Li ) and low-potential (cathodic stability: <0 V vs Li/Li ) imidazolium ionic liquids in a hexagonal boron nitride nanoplatelet matrix.

Printable hexagonal boron nitride ionogels.

Due to its excellent chemical/thermal stability and mechanical robustness, hexagonal boron nitride (hBN) is a promising solid matrix material for ionogels. While bulk hBN ionogels have been employed in macroscopic applications such as lithium-ion batteries, hBN ionogel inks that are compatible with high-resolution printing have not yet been realized. Here, we describe aerosol jet-printable ionogels using exfoliated hBN nanoplatelets as the solid matrix.

Phase-Inversion Polymer Composite Separators Based on Hexagonal Boron Nitride Nanosheets for High-Temperature Lithium-Ion Batteries.

By preventing electrical contact between anode and cathode electrodes while promoting ionic transport, separators are critical components in the safe operation of rechargeable battery technologies. However, traditional polymer-based separators have limited thermal stability, which has contributed to catastrophic thermal runaway failure modes that have conspicuously plagued lithium-ion batteries. Here, we describe the development of phase-inversion composite separators based on carbon-coated hexagonal boron nitride (hBN) nanosheets and poly(vinylidene fluoride) (PVDF) polymers that possess high porosity, electrolyte wettability, and thermal stability.

High-Modulus Hexagonal Boron Nitride Nanoplatelet Gel Electrolytes for Solid-State Rechargeable Lithium-Ion Batteries.

Solid-state electrolytes based on ionic liquids and a gelling matrix are promising for rechargeable lithium-ion batteries due to their safety under diverse operating conditions, favorable electrochemical and thermal properties, and wide processing compatibility. However, gel electrolytes also suffer from low mechanical moduli, which imply poor structural integrity and thus an enhanced probability of electrical shorting, particularly under conditions that are favorable for lithium dendrite growth. Here, we realize high-modulus, ion-conductive gel electrolytes based on imidazolium ionic liquids and exfoliated hexagonal boron nitride (hBN) nanoplatelets.

All-Printed, Self-Aligned Carbon Nanotube Thin-Film Transistors on Imprinted Plastic Substrates.

We present a self-aligned process for printing thin-film transistors (TFTs) on plastic with single-walled carbon nanotube (SWCNT) networks as the channel material. The SCALE (self-aligned capillarity-assisted lithography for electronics) process combines imprint lithography with inkjet printing. Specifically, inks are jetted into imprinted reservoirs, where they then flow into narrow device cavities due to capillarity.

All-Printed, Foldable Organic Thin-Film Transistors on Glassine Paper.

All-printed, foldable organic thin-film transistors are demonstrated on glassine paper with a combination of advanced materials and processing techniques. Glassine paper provides a suitable surface for high-performance printing methods, while graphene electrodes and an ion-gel gate dielectric enable robust stability over 100 folding cycles. Altogether, this study features a practical platform for low-cost, large-area, and foldable electronics.

Screen Printing of Highly Loaded Silver Inks on Plastic Substrates Using Silicon Stencils.

Screen printing is a potential technique for mass-production of printed electronics; however, improvement in printing resolution is needed for high integration and performance. In this study, screen printing of highly loaded silver ink (77 wt %) on polyimide films is studied using fine-scale silicon stencils with openings ranging from 5 to 50 μm wide. This approach enables printing of high-resolution silver lines with widths as small as 22 μm.

Two-dimensional TiO2 honeycomb structure for enhanced light extraction from polymer light-emitting diodes.

We have demonstrated the preparation of an ordered hole pattern via a simple colloidal assembly technique and a sol-gel process without the use of any special equipment to enhance light extraction from polymer light-emitting diodes (LEDs). From two-dimensional (2D) polystyrene (PS) colloidal crystals, 2D TiO2 honeycomb structures were easily obtained after depositing TiO(x) sol solution onto the colloidal crystals by a doctor blade technique and removing the PS colloidal particles. In order to optimize the thickness of the deposited TiO(x) materials for fabricating 2D TiO2 honeycomb structures, the concentration of the TiO(x) sol solution was controlled.

Highly stretchable and wearable graphene strain sensors with controllable sensitivity for human motion monitoring.

Because of their outstanding electrical and mechanical properties, graphene strain sensors have attracted extensive attention for electronic applications in virtual reality, robotics, medical diagnostics, and healthcare. Although several strain sensors based on graphene have been reported, the stretchability and sensitivity of these sensors remain limited, and also there is a pressing need to develop a practical fabrication process. This paper reports the fabrication and characterization of new types of graphene strain sensors based on stretchable yarns.

High-resolution, high-aspect ratio conductive wires embedded in plastic substrates.

A novel method is presented to fabricate high-resolution, high-aspect ratio metal wires embedded in a plastic substrate for flexible electronics applications. In a sequential process, high-resolution channels connected to low-resolution reservoirs are first created in a thermosetting polymer by imprint lithography. A reactive Ag ink is then inkjet-printed into the reservoirs and wicked into the channels by capillary forces.

High-resolution patterning of graphene by screen printing with a silicon stencil for highly flexible printed electronics.

High-resolution screen printing of pristine graphene is introduced for the rapid fabrication of conductive lines on flexible substrates. Well-defined silicon stencils and viscosity-controlled inks facilitate the preparation of high-quality graphene patterns as narrow as 40 μm. This strategy provides an efficient method to produce highly flexible graphene electrodes for printed electronics.

Foldable graphene electronic circuits based on paper substrates.

Graphene electronic circuits are prepared on paper substrates by using graphene nanoplates and applied to foldable paper-based electronics. The graphene circuits show a small change in conductance under various folding angles and maintain an electronic path on paper substrates after repetition of folding and unfolding. Foldable paper-based applications with graphene circuits exhibit excellent folding stability.

A Case of Obstructive Jaundice Caused by Paradoxical Reaction during Antituberculous Chemotherapy for Abdominal Tuberculosis.

Abdominal tuberculosis is not a rare disease, but obstructive jaundice caused by tuberculosis (tuberculous lymphadenitis, tuberculous enlargement of the head of pancreas, and/or tuberculous stricture of the biliary tree) is rare. We recently experienced a case of obstructive jaundice as a result of paradoxical reaction of periportal tuberculous lymphadenopathy that was treated successfully with corticosteroid and biliary drainage. No similar cases have been reported previously.