Direct Visualization of Lithium Polysulfides and Their Suppression in Liquid Electrolyte.

Understanding of lithium polysulfide (Li-PS) formation and the shuttle phenomenon is essential for practical application of the lithium/sulfur (Li/S) cell, which has superior theoretical specific energy (2600 Wh/kg). However, it suffers from the lack of direct observation on behaviors of soluble Li-PS in liquid electrolytes. Using in situ graphene liquid cell electron microscopy, we have visualized formation and diffusion of Li-PS simultaneous with morphological and phase evolutions of sulfur nanoparticles during lithiation.

Graphene Liquid Cell Electron Microscopy of Initial Lithiation in CoO Nanoparticles.

As it governs the overall performance of lithium-ion batteries, understanding the reaction pathway of lithiation is highly desired. For CoO nanoparticles as anode material, here, we report an initial conversion reaction pathway during lithiation. Using graphene liquid cell electron microscopy (GLC-EM), we reveal a CoO phase of the initial conversion product as well as morphological dynamics during CoO lithiation.

Pulverization-Tolerance and Capacity Recovery of Copper Sulfide for High-Performance Sodium Storage.

Finding suitable electrode materials is one of the challenges for the commercialization of a sodium ion battery due to its pulverization accompanied by high volume expansion upon sodiation. Here, copper sulfide is suggested as a superior electrode material with high capacity, high rate, and long-term cyclability owing to its unique conversion reaction mechanism that is pulverization-tolerant and thus induces the capacity recovery. Such a desirable consequence comes from the combined effect among formation of stable grain boundaries, semi-coherent boundaries, and solid-electrolyte interphase layers.

Strong stress-composition coupling in lithium alloy nanoparticles.

The stress inevitably imposed during electrochemical reactions is expected to fundamentally affect the electrochemistry, phase behavior and morphology of electrodes in service. Here, we show a strong stress-composition coupling in lithium binary alloys during the lithiation of tin-tin oxide core-shell nanoparticles. Using in situ graphene liquid cell electron microscopy imaging, we visualise the generation of a non-uniform composition field in the nanoparticles during lithiation.

Preparation of Graphene Liquid Cells for the Observation of Lithium-ion Battery Material.

In this work, we introduce the preparation of graphene liquid cells (GLCs), encapsulating both electrode materials and organic liquid electrolytes between two graphene sheets, and the facile synthesis of one-dimensional nanostructures using electrospinning. The GLC enables in situ transmission electron microscopy (TEM) for the lithiation dynamics of electrode materials. The in situ GLC-TEM using an electron beam for both imaging and lithiation can utilize not only realistic battery electrolytes, but also the high-resolution imaging of various morphological, phase, and interfacial transitions.

Unravelling inherent electrocatalysis of mixed-conducting oxide activated by metal nanoparticle for fuel cell electrodes.

Highly active metal nanoparticles are desired to serve in high-temperature electrocatalysis, for example, in solid oxide electrochemical cells. Unfortunately, the low thermal stability of nanosized particles and the sophisticated interface requirement for electrode structures to support concurrent ionic and electronic transport make it hard to identify the exact catalytic role of nanoparticles embedded within complex electrode architectures. Here we present an accurate analysis of the reactivity of oxide electrodes boosted by metal nanoparticles, where all particles participate in the reaction.

Atomic visualization of a non-equilibrium sodiation pathway in copper sulfide.

Sodium ion batteries have been considered a promising alternative to lithium ion batteries for large-scale energy storage owing to their low cost and high natural abundance. However, the commercialization of this device is hindered by the lack of suitable anodes with an optimized morphology that ensure high capacity and cycling stability of a battery. Here, we not only demonstrate that copper sulfide nanoplates exhibit close-to-theoretical capacity (~560 mAh g) and long-term cyclability, but also reveal that their sodiation follows a non-equilibrium reaction route, which involves successive crystallographic tuning.

In Situ High-Resolution Transmission Electron Microscopy (TEM) Observation of Sn Nanoparticles on SnO2 Nanotubes Under Lithiation.

We trace Sn nanoparticles (NPs) produced from SnO2 nanotubes (NTs) during lithiation initialized by high energy e-beam irradiation. The growth dynamics of Sn NPs is visualized in liquid electrolytes by graphene liquid cell transmission electron microscopy. The observation reveals that Sn NPs grow on the surface of SnO2 NTs via coalescence and the final shape of agglomerated NPs is governed by surface energy of the Sn NPs and the interfacial energy between Sn NPs and SnO2 NTs.

Freeze-Dried Sulfur-Graphene Oxide-Carbon Nanotube Nanocomposite for High Sulfur-Loading Lithium/Sulfur Cells.

The ambient-temperature rechargeable lithium/sulfur (Li/S) cell is a strong candidate for the beyond lithium ion cell since significant progress on developing advanced sulfur electrodes with high sulfur loading has been made. Here we report on a new sulfur electrode active material consisting of a cetyltrimethylammonium bromide-modified sulfur-graphene oxide-carbon nanotube (S-GO-CTA-CNT) nanocomposite prepared by freeze-drying. We show the real-time formation of nanocrystalline lithium sulfide (LiS) at the interface between the S-GO-CTA-CNT nanocomposite and the liquid electrolyte by in situ TEM observation of the reaction.

Direct Realization of Complete Conversion and Agglomeration Dynamics of SnO Nanoparticles in Liquid Electrolyte.

The conversion reaction is important in lithium-ion batteries because it governs the overall battery performance, such as initial Coulombic efficiency, capacity retention, and rate capability. Here, we have demonstrated in situ observation of the complete conversion reaction and agglomeration of nanoparticles (NPs) upon lithiation by using graphene liquid cell transmission electron microscopy. The observation reveals that the Sn NPs are nucleated from the surface of SnO, followed by merging with each other.

A gigantically increased ratio of electrical to thermal conductivity and synergistically enhanced thermoelectric properties in interface-controlled TiO-RGO nanocomposites.

We report synergistically enhanced thermoelectric properties through the independently controlled charge and thermal transport properties in a TiO-reduced graphene oxide (RGO) nanocomposite. By the consolidation of TiO-RGO hybrid powder using spark plasma sintering, we prepared an interface-controlled TiO-RGO nanocomposite where its grain boundaries are covered with the RGO network. Both the enhancement in electrical conductivity and the reduction in thermal conductivity were simultaneously achieved thanks to the beneficial effects of the RGO network, and detailed mechanisms are discussed.

Reliable control of filament formation in resistive memories by self-assembled nanoinsulators derived from a block copolymer.

Resistive random access memory (ReRAM) is a promising candidate for future nonvolatile memories. Resistive switching in a metal-insulator-metal structure is generally assumed to be caused by the formation/rupture of nanoscale conductive filaments (CFs) under an applied electric field. The critical issue of ReRAM for practical memory applications, however, is insufficient repeatability of the operating voltage and resistance ratio.

Anisotropic lithiation onset in silicon nanoparticle anode revealed by in situ graphene liquid cell electron microscopy.

Recent real-time analyses have provided invaluable information on the volume expansion of silicon (Si) nanomaterials during their electrochemical reactions with lithium ions and have thus served as useful bases for robust design of high capacity Si anodes in lithium ion batteries (LIBs). In an effort to deepen the understanding on the critical first lithiation of Si, especially in realistic liquid environments, herein, we have engaged in situ graphene liquid cell transmission electron microscopy (GLC-TEM). In this technique, chemical lithiation is stimulated by electron-beam irradiation, while the lithiation process is being monitored by TEM in real time.

In situ atomic imaging of coalescence of Au nanoparticles on graphene: rotation and grain boundary migration.

Using in situ transmission electron microscopy, we demonstrated that gold nanoparticles are unified via "oriented attachment" assisted either by nanoparticle rotation or grain boundary migration at the attachment interface. We also observed that the combined nanoparticle changes shape with stable facet planes via surface diffusion, along with recrystallization.

Self-assembled incorporation of modulated block copolymer nanostructures in phase-change memory for switching power reduction.

Phase change memory (PCM), which exploits the phase change behavior of chalcogenide materials, affords tremendous advantages over conventional solid-state memory due to its nonvolatility, high speed, and scalability. However, high power consumption of PCM poses a critical challenge and has been the most significant obstacle to its widespread commercialization. Here, we present a novel approach based on the self-assembly of a block copolymer (BCP) to form a thin nanostructured SiOx layer that locally blocks the contact between a heater electrode and a phase change material.

Fabrication of high-density In(3)Sb(1)Te(2) phase change nanoarray on glass-fabric reinforced flexible substrate.

Mushroom-shaped phase change memory (PCM) consisting of a Cr/In(3)Sb(1)Te(2) (IST)/TiN (bottom electrode) nanoarray was fabricated via block copolymer lithography and single-step dry etching with a gas mixture of Ar/Cl(2). The process was performed on a high performance transparent glass-fabric reinforced composite film (GFR Hybrimer) suitable for use as a novel substrate for flexible devices. The use of GFR Hybrimer with low thermal expansion and flat surfaces enabled successful nanoscale patterning of functional phase change materials on flexible substrates.