Ultrahigh surface area zirconium MOFs and insights into the applicability of the BET theory.

An isoreticular series of metal-organic frameworks (MOFs) with the ftw topology based on zirconium oxoclusters and tetracarboxylate linkers with a planar core (NU-1101 through NU-1104) has been synthesized employing a linker expansion approach. In this series, NU-1103 has a pore volume of 2.91 cc g(-1) and a geometrically calculated surface area of 5646 m(2) g(-1), which is the highest value reported to date for a zirconium-based MOF and among the largest that have been reported for any porous material.

Post-assembly atomic layer deposition of ultrathin metal-oxide coatings enhances the performance of an organic dye-sensitized solar cell by suppressing dye aggregation.

Dye aggregation and concomitant reduction of dye excited-state lifetimes and electron-injection yields constitute a significant mechanism for diminution of light-to-electrical energy conversion efficiencies in many dye-sensitized solar cells (DSCs). For TiO2-based DSCs prepared with an archetypal donor-acceptor organic dye, (E)-2-cyano-3-(5'-(5''-(p-(diphenylamino)phenyl)-thiophen-2''-yl)thiophen-2'-yl)acrylic acid (OrgD), we find, in part via ultrafast spectroscopy measurements, that postdye-adsorption atomic layer deposition (ALD) of ultrathin layers of either TiO2 or Al2O3 effectively reverses residual aggregation. Notably, the ALD treatment is significantly more effective than the widely used aggregation-inhibiting coadsorbent, chenodeoxycholic acid.

MOF functionalization via solvent-assisted ligand incorporation: phosphonates vs carboxylates.

Solvent-assisted ligand incorporation (SALI) is useful for functionalizing the channels of metal-organic framework (MOF) materials such as NU-1000 that offer substitutionally labile zirconium(IV) coordination sites for nonbridging ligands. Each of the 30 or so previous examples relied upon coordination of a carboxylate ligand to achieve incorporation. Here we show that, with appropriate attention to ligand/node stoichiometry, SALI can also be achieved with phosphonate-terminated ligands.

Functionalized defects through solvent-assisted linker exchange: synthesis, characterization, and partial postsynthesis elaboration of a metal-organic framework containing free carboxylic acid moieties.

Intentional incorporation of defect sites functionalized with free carboxylic acid groups was achieved in a paddlewheel-based metal-organic framework (MOF) of rht topology, NU-125. Solvent-assisted linker exchange (SALE) performed on a mixed-linker derivative of NU-125 containing isophthalate (IPA) linkers (NU-125-IPA) led to the selective replacement of the IPA linkers in the framework with a conjugate base of trimesic acid (H3BTC). Only two of the three carboxylic acid moieties offered by H3BTC coordinate to the Cu2 centers in the MOF, yielding a rare example of a MOF decorated with free -COOH groups.

Controlling structure and porosity in catalytic nanoparticle superlattices with DNA.

Herein, we describe a strategy for converting catalytically inactive, highly crystalline nanoparticle superlattices embedded in silica into catalytically active, porous structures through superlattice assembly and calcination. First, a body-centered cubic (bcc) superlattice is synthesized through the assembly of two sets of 5 nm gold nanoparticles chemically modified with DNA bearing complementary sticky end sequences. These superlattices are embedded in silica and calcined at 350 °C to provide access to the catalytic nanoparticle surface sites.

Metal-organic framework materials for light-harvesting and energy transfer.

A critical review of the emerging field of MOFs for photon collection and subsequent energy transfer is presented. Discussed are examples involving MOFs for (a) light harvesting, using (i) MOF-quantum dots and molecular chromophores, (ii) chromophoric MOFs, and (iii) MOFs with light-harvesting properties, and (b) energy transfer, specifically via the (i) Förster energy transfer and (ii) Dexter exchange mechanism.

Turning on catalysis: incorporation of a hydrogen-bond-donating squaramide moiety into a Zr metal-organic framework.

Herein, we demonstrate that the incorporation of an acidic hydrogen-bond-donating squaramide moiety into a porous UiO-67 metal-organic framework (MOF) derivative leads to dramatic acceleration of the biorelevant Friedel-Crafts reaction between indole and β-nitrostyrene. In comparison, it is shown that free squaramide derivatives, not incorporated into MOF architectures, have no catalytic activity. Additionally, using the UiO-67 template, we were able to perform a direct comparison of catalytic activity with that of the less acidic urea-based analogue.

Post metalation of solvothermally grown electroactive porphyrin metal-organic framework thin films.

Uniform thin films of a metal-organic framework, which is constructed from free-base porphyrin linkers and hexa-zirconium nodes (MOF-525), are solvothermally grown on conducting substrates. Subsequently, solvothermal post metalations are employed to prepare the Zn-MOF-525 and Co-MOF-525 thin films. All the thin films are electroactive in aqueous media.

Greenlighting photoelectrochemical oxidation of water by iron oxide.

Hematite (α-Fe2O3) is one of just a few candidate electrode materials that possess all of the following photocatalyst-essential properties for scalable application to water oxidation: excellent stability, earth-abundance, suitability positive valence-band-edge energy, and significant visible light absorptivity. Despite these merits, hematite's modest oxygen evolution reaction kinetics and its poor efficiency in delivering photogenerated holes, especially holes generated by green photons, to the electrode/solution interface, render it ineffective as a practical water-splitting catalyst. Here we show that hole delivery and catalytic utilization can be substantially improved through Ti alloying, provided that the alloyed material is present in ultrathin-thin-film form.

A hafnium-based metal-organic framework as an efficient and multifunctional catalyst for facile CO2 fixation and regioselective and enantioretentive epoxide activation.

Porous heterogeneous catalysts play a pivotal role in the chemical industry. Herein a new Hf-based metal-organic framework (Hf-NU-1000) incorporating Hf6 clusters is reported. It demonstrates high catalytic efficiency for the activation of epoxides, facilitating the quantitative chemical fixation of CO2 into five-membered cyclic carbonates under ambient conditions, rendering this material an excellent catalyst.

Post-assembly transformations of porphyrin-containing metal-organic framework (MOF) films fabricated via automated layer-by-layer coordination.

Herein, we demonstrate the robustness of layer-by-layer (LbL)-assembled, pillared-paddlewheel-type MOF films toward conversion to new or modified MOFs via solvent-assisted linker exchange (SALE) and post-assembly linker metalation. Further, we show that LbL synthesis can afford MOFs that have proven inaccessible through other de novo strategies.

Synthesis and characterization of functionalized metal-organic frameworks.

Metal-organic frameworks have attracted extraordinary amounts of research attention, as they are attractive candidates for numerous industrial and technological applications. Their signature property is their ultrahigh porosity, which however imparts a series of challenges when it comes to both constructing them and working with them. Securing desired MOF chemical and physical functionality by linker/node assembly into a highly porous framework of choice can pose difficulties, as less porous and more thermodynamically stable congeners (e.

Enhanced gas sorption properties and unique behavior toward liquid water in a pillared-paddlewheel metal-organic framework transmetalated with Ni(II).

The synthesis of a permanently porous pillared-paddlewheel metal-organic framework (MOF) was achieved through transmetalation of Zn(II) with Ni(II). The MOF can be treated with liquid water, leading to the reversible displacement of 50% of its pillars by water molecules and resulting in a most unusual crystalline and permanently porous structure.

Dynamics of Back Electron Transfer in Dye-Sensitized Solar Cells Featuring 4-tert-Butyl-Pyridine and Atomic-Layer-Deposited Alumina as Surface Modifiers.

A series of dye-sensitized solar cells (DSCs) was constructed with TiO2 nanoparticles and N719 dye. The standard I3(-)/I(-) redox shuttle and the Co(1,10-phenanthroline)3(3+/2+) shuttle were employed. DSCs were modified with atomic-layered-deposited (ALD) coatings of Al2O3 and/or with the surface-adsorbing additive 4-tert-butyl-pyridine.

Water-stable zirconium-based metal-organic framework material with high-surface area and gas-storage capacities.

We designed, synthesized, and characterized a new Zr-based metal-organic framework material, NU-1100, with a pore volume of 1.53 ccg(-1) and Brunauer-Emmett-Teller (BET) surface area of 4020 m(2) g(-1) ; to our knowledge, currently the highest published for Zr-based MOFs. CH4 /CO2 /H2 adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions.

Directed growth of electroactive metal-organic framework thin films using electrophoretic deposition.

Electrophoretic deposition (EPD) is used to assemble metal-organic framework (MOF) materials in nano- and micro-particulate, thin-film form. The flexibility of the method is demonstrated by the successful deposition of 4 types of MOFs: NU-1000, UiO-66, HKUST-1, and Al-MIL-53. Additionally, EPD is used to pattern the growth of NU-1000 thin films that exhibit full electrochemical activity.

Real-time observation of atomic layer deposition inhibition: metal oxide growth on self-assembled alkanethiols.

Through in situ quartz crystal microbalance (QCM) monitoring, we resolve the growth of a self-assembled monolayer (SAM) and subsequent metal oxide deposition with high resolution. We introduce the fitting of mass deposited during each atomic layer deposition (ALD) cycle to an analytical island-growth model that enables quantification of growth inhibition, nucleation density, and the uninhibited ALD growth rate. A long-chain alkanethiol was self-assembled as a monolayer on gold-coated quartz crystals in order to investigate its effectiveness as a barrier to ALD.