Highly stretchable polymer semiconductor thin films with multi-modal energy dissipation and high relative stretchability.

Stretchable polymer semiconductors (PSCs) have seen great advancements alongside the development of soft electronics. But it remains a challenge to simultaneously achieve high charge carrier mobility and stretchability. Herein, we report the finding that stretchable PSC thin films (<100-nm-thick) with high stretchability tend to exhibit multi-modal energy dissipation mechanisms and have a large relative stretchability (rS) defined by the ratio of the entropic energy dissipation to the enthalpic energy dissipation under strain.

Tough-interface-enabled stretchable electronics using non-stretchable polymer semiconductors and conductors.

Semiconducting polymer thin films are essential elements of soft electronics for both wearable and biomedical applications. However, high-mobility semiconducting polymers are usually brittle and can be easily fractured under small strains (<10%). Recently, the improved intrinsic mechanical properties of semiconducting polymer films have been reported through molecular design and nanoconfinement.

Topological supramolecular network enabled high-conductivity, stretchable organic bioelectronics.

Intrinsically stretchable bioelectronic devices based on soft and conducting organic materials have been regarded as the ideal interface for seamless and biocompatible integration with the human body. A remaining challenge is to combine high mechanical robustness with good electrical conduction, especially when patterned at small feature sizes. We develop a molecular engineering strategy based on a topological supramolecular network, which allows for the decoupling of competing effects from multiple molecular building blocks to meet complex requirements.

High-brightness all-polymer stretchable LED with charge-trapping dilution.

Next-generation light-emitting displays on skin should be soft, stretchable and bright. Previously reported stretchable light-emitting devices were mostly based on inorganic nanomaterials, such as light-emitting capacitors, quantum dots or perovskites. They either require high operating voltage or have limited stretchability and brightness, resolution or robustness under strain.

High-frequency and intrinsically stretchable polymer diodes.

Skin-like intrinsically stretchable soft electronic devices are essential to realize next-generation remote and preventative medicine for advanced personal healthcare. The recent development of intrinsically stretchable conductors and semiconductors has enabled highly mechanically robust and skin-conformable electronic circuits or optoelectronic devices. However, their operating frequencies have been limited to less than 100 hertz, which is much lower than that required for many applications.

Tuning Conjugated Polymer Chain Packing for Stretchable Semiconductors.

In order to apply polymer semiconductors to stretchable electronics, they need to be easily deformed under strain without being damaged. A small number of conjugated polymers, typically with semicrystalline packing structures, have been reported to exhibit mechanical stretchability. Herein, a method is reported to modify polymer semiconductor packing-structure using a molecular additive, dioctyl phthalate (DOP), which is found to act as a molecular spacer, to be inserted between the amorphous chain networks and disrupt the crystalline packing.

Monolithic optical microlithography of high-density elastic circuits.

Polymeric electronic materials have enabled soft and stretchable electronics. However, the lack of a universal micro/nanofabrication method for skin-like and elastic circuits results in low device density and limited parallel signal recording and processing ability relative to silicon-based devices. We present a monolithic optical microlithographic process that directly micropatterns a set of elastic electronic materials by sequential ultraviolet light-triggered solubility modulation.

A design strategy for high mobility stretchable polymer semiconductors.

As a key component in stretchable electronics, semiconducting polymers have been widely studied. However, it remains challenging to achieve stretchable semiconducting polymers with high mobility and mechanical reversibility against repeated mechanical stress. Here, we report a simple and universal strategy to realize intrinsically stretchable semiconducting polymers with controlled multi-scale ordering to address this challenge.

Multivalent Assembly of Flexible Polymer Chains into Supramolecular Nanofibers.

Polymeric materials in nature regularly employ ordered, hierarchical structures in order to perform unique and precise functions. Importantly, these structures are often formed and stabilized by the cooperative summation of many weak interactions as opposed to the independent association of a few strong bonds. Here, we show that synthetic, flexible polymer chains with periodically placed and directional dynamic bonds collectively assemble into supramolecular nanofibers when the overall molecular weight is below the polymer's critical entanglement molecular weight.

Engineering Supramolecular Polymer Conformation for Efficient Carbon Nanotube Sorting.

Supramolecular polymer sorting is a promising approach to separating single-walled carbon nanotubes (CNTs) by electronic type. Unlike conjugated polymers, they can be easily removed from the CNTs after sorting by breaking the supramolecular bonds, allowing for isolation of electronically pristine CNTs as well as facile recycling of the sorting polymer. However, little is understood about how supramolecular polymer properties affect CNT sorting.

Stretchable and Fully Degradable Semiconductors for Transient Electronics.

The next materials challenge in organic stretchable electronics is the development of a fully degradable semiconductor that maintains stable electrical performance under strain. Herein, we decouple the design of stretchability and transience by harmonizing polymer physics principles and molecular design in order to demonstrate for the first time a material that simultaneously possesses three disparate attributes: semiconductivity, intrinsic stretchability, and full degradability. We show that we can design acid-labile semiconducting polymers to appropriately phase segregate within a biodegradable elastomer, yielding semiconducting nanofibers that concurrently enable controlled transience and strain-independent transistor mobilities.

Fine-Tuning Semiconducting Polymer Self-Aggregation and Crystallinity Enables Optimal Morphology and High-Performance Printed All-Polymer Solar Cells.

Polymer aggregation and crystallization behavior play a crucial role in the performance of all-polymer solar cells (all-PSCs). Gaining control over polymer self-assembly via molecular design to influence bulk-heterojunction active-layer morphology, however, remains challenging. Herein, we show a simple yet effective way to modulate the self-aggregation of the commonly used naphthalene diimide (NDI)-based acceptor polymer (N2200), by systematically replacing a certain amount of alkyl side-chains with compact bulky side-chains (CBS).

Stretchable self-healable semiconducting polymer film for active-matrix strain-sensing array.

Skin-like sensory devices should be stretchable and self-healable to meet the demands for future electronic skin applications. Despite recent notable advances in skin-inspired electronic materials, it remains challenging to confer these desired functionalities to an active semiconductor. Here, we report a strain-sensitive, stretchable, and autonomously self-healable semiconducting film achieved through blending of a polymer semiconductor and a self-healable elastomer, both of which are dynamically cross-linked by metal coordination.

Conjugated Carbon Cyclic Nanorings as Additives for Intrinsically Stretchable Semiconducting Polymers.

Molecular additives are often used to enhance dynamic motion of polymeric chains, which subsequently alter the functional and physical properties of polymers. However, controlling the chain dynamics of semiconducting polymer thin films and understanding the fundamental mechanisms of such changes is a new area of research. Here, cycloparaphenylenes (CPPs) are used as conjugated molecular additives to tune the dynamic behaviors of diketopyrrolopyrrole-based (DPP-based) semiconducting polymers.

Multi-scale ordering in highly stretchable polymer semiconducting films.

Stretchable semiconducting polymers have been developed as a key component to enable skin-like wearable electronics, but their electrical performance must be improved to enable more advanced functionalities. Here, we report a solution processing approach that can achieve multi-scale ordering and alignment of conjugated polymers in stretchable semiconductors to substantially improve their charge carrier mobility. Using solution shearing with a patterned microtrench coating blade, macroscale alignment of conjugated-polymer nanostructures was achieved along the charge transport direction.

Quadruple H-Bonding Cross-Linked Supramolecular Polymeric Materials as Substrates for Stretchable, Antitearing, and Self-Healable Thin Film Electrodes.

Herein, we report a de novo chemical design of supramolecular polymer materials (SPMs-1-3) by condensation polymerization, consisting of (i) soft polymeric chains (polytetramethylene glycol and tetraethylene glycol) and (ii) strong and reversible quadruple H-bonding cross-linkers (from 0 to 30 mol %). The former contributes to the formation of the soft domain of the SPMs, and the latter furnishes the SPMs with desirable mechanical properties, thereby producing soft, stretchable, yet tough elastomers. The resulting SPM-2 was observed to be highly stretchable (up to 17 000% strain), tough (fracture energy ∼30 000 J/m), and self-healing, which are highly desirable properties and are superior to previously reported elastomers and tough hydrogels.

Deformable Organic Nanowire Field-Effect Transistors.

Deformable electronic devices that are impervious to mechanical influence when mounted on surfaces of dynamically changing soft matters have great potential for next-generation implantable bioelectronic devices. Here, deformable field-effect transistors (FETs) composed of single organic nanowires (NWs) as the semiconductor are presented. The NWs are composed of fused thiophene diketopyrrolopyrrole based polymer semiconductor and high-molecular-weight polyethylene oxide as both the molecular binder and deformability enhancer.

n-Type Doped Conjugated Polymer for Nonvolatile Memory.

This study demonstrates a facile way to efficiently induce strong memory behavior from common p-type conjugated polymers by adding n-type dopant 2-(2-methoxyphenyl)-1,3-dimethyl-2,3-dihydro-1H-benzoimidazole. The n-type doped p-channel conjugated polymers not only enhance n-type charge transport characteristics of the polymers, but also facilitate to storage charges and cause reversible bistable (ON and OFF states) switching upon application of gate bias. The n-type doped memory shows a large memory window of up to 47 V with an on/off current ratio larger than 10 000.

Transparent deoxyribonucleic acid substrate with high mechanical strength for flexible and biocompatible organic resistive memory devices.

Biocompatible deoxyribonucleic acid (DNA), with high mechanical strength, was employed as the substrate for a Ag nanowire (Ag NW) pattern and then used to fabricate flexible resistor-type memory devices. The memory exhibited typical write-once-read-many (WORM)-type memory features with a high ON/OFF ratio (10), long-term retention ability (10 s) and excellent mechanical endurance.

High Performance Nonvolatile Transistor Memories Utilizing Functional Polyimide-Based Supramolecular Electrets.

We report pentacene-based organic field-effect transistor memory devices utilizing supramolecular electrets, consisting of a polyimide, PI(6FOH-ODPA), containing hydroxyl groups for hydrogen bonding with amine functionalized aromatic rings (AM) of 1-aniline (AM1), 2-naphthylamine (AM2), 2-aminoanthracene (AM3), and 1-aminopyrene (AM4). The effect of the phenyl ring size and composition of AM1-AM4 on the hole-trapping capability of the fabricated devices was investigated systematically. Under an operating voltage under ±40 V, the prepared devices using the electrets of 100 % AM1-AM4/PI ratios exhibited a memory window of 0, 8.

Significance of the double-layer capacitor effect in polar rubbery dielectrics and exceptionally stable low-voltage high transconductance organic transistors.

Both high gain and transconductance at low operating voltages are essential for practical applications of organic field-effect transistors (OFETs). Here, we describe the significance of the double-layer capacitance effect in polar rubbery dielectrics, even when present in a very low ion concentration and conductivity. We observed that this effect can greatly enhance the OFET transconductance when driven at low voltages.

Well-defined star-shaped donor-acceptor conjugated molecules for organic resistive memory devices.

Solution processable star-shaped donor-acceptor (D-A) conjugated molecules (TPA-T-NI and TPA-3T-NI) with an electron-donating triphenylamine (TPA) core, three thienylene or terthienylene spacers, and three 1.8-naphthalimide (NI) electron-withdrawing end-groups are explored for the first time as charge storage materials for resistor-type memory devices owing to the efficient electric charge transfer and trapping.

A poly(fluorene-thiophene) donor with a tethered phenanthro[9,10-d]imidazole acceptor for flexible nonvolatile flash resistive memory devices.

A conjugated poly(fluorene-thiophene) donor and a tethered phenanthro[9,10-d]imidazole acceptor (PFT-PI) was used as the active layer in flexible nonvolatile resistor memory devices with low threshold voltages (±2 V), low switching powers (∼100 μW cm(-2)), large ON/OFF memory windows (10(4)), good retention (>10(4) s) and excellent endurance against electric and mechanical stimulus.