Fluorescence reports intact quantum dot uptake into roots and translocation to leaves of Arabidopsis thaliana and subsequent ingestion by insect herbivores.

We explored the impact of quantum dot (QD) coat characteristics on NP stability, uptake, and translocation in Arabidopsis thaliana, and subsequent transfer to primary consumers, Trichoplusia ni (T. ni). Arabidopsis was exposed to CdSe/CdZnS QDs with three different coatings: Poly(acrylic acid-ethylene glycol) (PAA-EG), polyethylenimine (PEI) and poly(maleic anhydride-alt-1-octadecene)-poly(ethylene glycol) (PMAO-PEG), which are anionic, cationic, and relatively neutral, respectively.

Uptake, translocation, and transformation of quantum dots with cationic versus anionic coatings by Populus deltoides × nigra cuttings.

Manipulation of the organic coatings of nanoparticles such as quantum dots (QDs) to enhance specific applications may also affect their interaction and uptake by different organisms. In this study, poplar trees (Populus deltoides × nigra) were exposed hydroponically to 50-nM CdSe/CdZnS QDs coated with cationic polyethylenimine (PEI) (35.3 ± 6.

Antioxidant properties of cerium oxide nanocrystals as a function of nanocrystal diameter and surface coating.

This work examines the effect of nanocrystal diameter and surface coating on the reactivity of cerium oxide nanocrystals with H2O2 both in chemical solutions and in cells. Monodisperse nanocrystals were formed in organic solvents from the decomposition of cerium precursors, and subsequently phase transferred into water using amphiphiles as nanoparticle coatings. Quantitative analysis of the antioxidant capacity of CeO2-x using gas chromatography and a luminol test revealed that 2 mol of H2O2 reacted with every mole of cerium(III), suggesting that the reaction proceeds via a Fenton-type mechanism.

Toxicity of quantum dots and cadmium salt to Caenorhabditis elegans after multigenerational exposure.

To fully understand the biological and environmental impacts of nanomaterials requires studies that address both sublethal end points and multigenerational effects. Here, we use a nematode to examine these issues as they relate to exposure to two different types of quantum dots, core (CdSe) and core-shell (CdSe/ZnS), and to compare the effect to those observed after cadmium salt exposures. The strong fluorescence of the core-shell QDs allowed for the direct visualization of the materials in the digestive track within a few hours of exposure.

Small and stable phosphorylcholine zwitterionic quantum dots for weak nonspecific phagocytosis and effective Tat peptide functionalization.

Facile surface modification of quantum dots (QDs) to make them water-soluble, small, stable, antibiofouling, and functional is crucial for their biological applications. This study demonstrates a simple ligand-exchange reaction to convert hydrophobic CdSe/ZnS QDs into water-soluble QDs using amphiphilic, zwitterionic 11-mercaptoundecylphosphorylcholine (HS-PC). The phosphorylcholine (PC)-modified QDs (QD-PC) possess several advantages, such as small hydrodynamic diameter, good resistance to pH variations and high salinity, excellent stability in 100% human plasma, and low protein adsorption.

Measuring the grafting density of nanoparticles in solution by analytical ultracentrifugation and total organic carbon analysis.

Many of the solution phase properties of nanoparticles, such as their colloidal stability and hydrodynamic diameter, are governed by the number of stabilizing groups bound to the particle surface (i.e., grafting density).

Relative susceptibility and transcriptional response of nitrogen cycling bacteria to quantum dots.

Little is known about the potential impacts of accidental or incidental releases of manufactured nanomaterials to microbial ecosystem services (e.g., nutrient cycling).

Trophic transfer of amphiphilic polymer coated CdSe/ZnS quantum dots to Danio rerio.

To investigate the trophic transfer of nanomaterials along the food chain, we examined the potential trophic transfer and biomagnification of CdSe/ZnS quantum dots (QDs) in a simple freshwater food chain. Our results indicate that QDs can transfer from zooplankton to Danio rerio (zebrafish) by dietary exposure. No significant biomagnification of QDs was observed and the biomagnification factors for both adult and juvenile zebrafish were both less than one (0.

Cellular and transcriptional response of Pseudomonas stutzeri to quantum dots under aerobic and denitrifying conditions.

Pseudomonas stutzeri was exposed to quantum dots (QDs) with three different surface coatings (anionic polymaleic anhydride-alt-1-octadecene (PMAO), cationic polyethylenimine (PEI), and carboxyl QDs) under both aerobic and anaerobic (denitrifying) conditions. Under aerobic conditions, toxicity (assessed per growth inhibition) increased from PMAO to carboxyl to PEI QDs. The positive charge of PEI facilitated direct contact with negatively charged bacteria, which was verified by TEM analysis.

Low temperature synthesis of ZnS and CdZnS shells on CdSe quantum dots.

Methods for synthesizing quantum dots generally rely on very high temperatures to both nucleate and grow core and core-shell semiconductor nanocrystals. In this work, we generate highly monodisperse ZnS and CdZnS shells on CdSe semiconductor nanocrystals at temperatures as low as 65 degrees C by enhancing the precursor solubility. Relatively small amounts of trioctylphosphine and trioctylphosphine oxide have marked effects on the solubility of the metal salts used to form shells; their inclusion in the precursor solutions, which use thiourea as a sulfur source, can lead to homogeneous and fully dissolved solutions.

Quantification of water solubilized CdSe/ZnS quantum dots in Daphnia magna.

The relative transparency of Daphnia magna (daphnia) and the unique optical properties of quantum dots (QDs) were paired to study the accumulation potential and surface coating effects on uptake of amphiphilic polymer coated CdSe/ZnS QDs. Fluorescence confocal laser scanning microscopy was used to visualize and spectrally distinguish QDs from competing autofluorescent signals arising from the daphnia themselves and their food sources. QDs were found to accumulate within the digestive tracts of daphnia, as well as, in some cases, adhere to the carapace, antennae, and thoracic appendages.

Bilayers as phase transfer agents for nanocrystals prepared in nonpolar solvents.

The effective water dispersion of highly uniform nanoparticles synthesized in organic solvents is a major issue for their broad applications. In an effort to overcome this problem, iron oxide and cadmium selenide nanocrystals were surrounded by lipid bilayers to create stable, aqueous dispersions. The core inorganic particles were originally generated in oleic acid and 1-octadecene.

Quantum dot weathering results in microbial toxicity.

Quantum dots (QDs) are increasingly being used for electronics, solar energy generation, and medical imaging applications. Most QDs consist of a heavy metal core/shell coated with amphiphilic organics that stabilize the nanoparticles and allow conjugation with biological molecules. In this study, QDs were evaluated for their effects on bacterial pure cultures, which serve as models of cell toxicity and indicators of potential impact to ecosystem health.

Microscale enzymatic optical biosensors using mass transport limiting nanofilms. 1. Fabrication and characterization using glucose as a model analyte.

"Smart tattoo" sensors-fluorescent microspheres that can be implanted intradermally and interrogated noninvasively using light-are being developed as potential tools for in vivo biochemical monitoring. In this work, a platform for enzymatic tattoo-type sensors is described and prototype devices evaluated using glucose as a model analyte. Sensor particles were prepared by immobilizing Pt(II) octaethylporphine (PtOEP), a phosphorescent dye readily quenched by molecular oxygen, into hybrid silicate microspheres, followed by loading and subsequent covalent immobilization of glucose oxidase.

Enzymatic fluorescent microsphere glucose sensors:evaluation of response under dynamic conditions.

Most previous attempts at the development of a "smart tattoo" for glucose monitoring in diabetes--implantable fluorescent microspheres that can be implanted intradermally and interrogated transdermally using light--have focused on the encapsulation of a competitive binding assay for glucose within hydrogel microspheres or polyelectrolyte microcapsules. We recently reported on the development of a microsphere sensor based on an enzymatic scheme, combined with an oxygen-quenched fluorescent reporter element. A novel feature of this design is the use of polyelectrolyte multilayer nanofilms, which are assembled stepwise on the surface of the microspheres, for modulation of glucose and oxygen mass transport, allowing them to be designed for sensitive and safe operation within the "oxygen deficit" present in the skin.

Synthesis and functionalization of monodisperse poly(ethylene glycol) hydrogel microspheres within polyelectrolyte multilayer microcapsules.

Polyelectrolyte multilayer microcapsules were used as templates to prepare monodisperse poly(ethylene glycol) (PEG) hydrogel microspheres, which can react with amine-bearing molecules.

Combined physical and chemical immobilization of glucose oxidase in alginate microspheres improves stability of encapsulation and activity.

Chemical sensors utilizing immobilized enzymes and proteins are important for monitoring chemical processes and biological systems. In this study, calcium-cross-linked alginate hydrogel microspheres were fabricated as enzyme carriers by an emulsification technique. Glucose oxidase (GOx) was encapsulated in alginate microspheres using three different methods: physical entrapment (emulsion), chemical conjugation (conjugation), and a combination of physical entrapment and chemical conjugation (emulsion-conjugation).

Loading of hydrophobic materials into polymer particles: implications for fluorescent nanosensors and drug delivery.

A straightforward method for loading hydrophobic materials into commercially available polymer nano- or microparticles is described. PMMA and PS nano/microparticles were swelled by an organic solvent with an ionic surfactant (SDS) to stabilize the particles in aqueous solution. FITC and Ru(dpp)3Cl2 were loaded into those particles based on the principle of "like dissolves like".

Poly(D,L-lactic acid)-block-(ligand-tethered poly(ethylene glycol)) copolymers as surface additives for promoting chondrocyte attachment and growth.

The poly(D,L-lactic acid)-block-(ligand-tethered poly(ethylene glycol)) copolymer was explored to engineer poly(D,L-lactic acid) (PLA) material to promote chondrocyte attachment and growth. The poly(D,L-lactic acid)-block-poly(ethylene glycol) copolymer (PLE) was synthesized by a coupling reaction between PLA and poly(ethylene glycol) (PEG) (M(n) 1000, 2000, and 4000 respectively), with the use of 4,4'-methylenediphenyl diisocyanate (MDI). Then the PLE was activated by methyl sulfonyl chloride and the amino acids or arginine-glycine-aspartic acid tripeptide (RGD) was attached, which was verified by the ninhydrin-UV method.

Stable encapsulation of active enzyme by application of multilayer nanofilm coatings to alginate microspheres.

In an effort to improve the stability for long-term biosensor use, layer-by-layer self-assembly was explored as a potential technique to provide a diffusion barrier to encapsulated glucose oxidase inside alginate microspheres (<5 microm), fabricated using an emulsification technique. The total loss of encapsulated enzyme was reduced to less than 25 and 15% with the application of single PAH/PSS and crosslinked PAH/PAA coatings, respectively, in comparison to at least a 45% loss observed with uncoated and PDDA/PSS-coated microspheres. Furthermore, it was found that enzyme within PAH/PSS- and crosslinked PAH/PAA-coated spheres retained more than 84 and 60% of initial activity, respectively, after three months, whereas uncoated and PDDA/PSS-coated microspheres retained less than 20%.

Osteoblast growth promotion by protein electrostatic self-assembly on biodegradable poly(lactide).

Extracellular matrix (ECM)-like coating was developed on biodegradable biomaterials based on the electrostatic self-assembly (ESA) technique to promote osteoblast growth. Poly(ethylenimine) (PEI) was first employed to obtain a stable positively charged surface on poly (DL-lactide) (PDL-LA) substrate. Gelatin was selected as ECM-like biomacromolecule to deposit on the activated PDL-LA substrate using the ESA technique.

Spontaneous loading of positively charged macromolecules into alginate-templated polyelectrolyte multilayer microcapsules.

A simple and high-efficiency approach to loading macromolecules into microscale carriers is presented. Calcium-cross-linked alginate hydrogel microspheres were fabricated by an emulsification technique and then used as negatively charged templates to form polyelectrolyte multilayer coatings. A calcium ion chelator, EDTA, was used to free the Ca(2+)-cross-linked alginate hydrogel within {poly(allylamine hydrochloride)/poly (styrene sulfonate)}(4) ({PAH/PSS}(4)) coating, allowing partial release of alginate.

Stabilization of glucose oxidase in alginate microspheres with photoreactive diazoresin nanofilm coatings.

The nanoassembly and photo-crosslinking of diazo-resin (DAR) coatings on small alginate microspheres for stable enzyme entrapment is described. Multilayer nanofilms of DAR with poly(styrene sulfonate) (PSS) were used in an effort to stabilize the encapsulation of glucose oxidase enzyme for biosensor applications. The activity and physical encapsulation of the trapped enzyme were measured over 24 weeks to compare the effectiveness of nanofilm coatings and crosslinking for stabilization.

Macromolecule encapsulation in diazoresin-based hollow polyelectrolyte microcapsules.

A stable enzyme encapsulation technique based on the conversion of weak interactions between diazo resin/poly(styrene sulfonate) to covalent bonds was explored. Photosensitive diazoresin-based polyelectrolyte microcapsules were prepared via layer-by-layer electrostatic self-assembly of poly(styrene sulfonate) and diazoresin on MnCO(3) templates. UV-vis and zeta-potential measurements confirmed the alternate deposition of {PSS/DAR} multilayers on the micrometer-sized dissolvable templates.

Protein electrostatic self-assembly on poly(DL-lactide) scaffold to promote osteoblast growth.

The development of protein coating on 3D biodegradable scaffold based on electrostatic self-assembly (ESA) to promote osteoblast growth is reported. Poly (ethylenimine) (PEI) was employed to obtain a stable positively charged surface on poly(DL-lactide) (PDL-LA) substrate. An extracellular-matrix (ECM)-like biomacromolecule, gelatin, was chosen as the polyelectrolyte to deposit on the activated PDL-LA substrate via ESA technique.