Layer-by-Layer-Assembled Polyaniline/MXene Thin Film and Device for Improved Electrochromic and Energy Storage Capabilities.

Polyaniline (PANI) is an attractive electrochromic and storage material due to its reversible and sustainable electrochemical redox processes. However, the insufficient surface area and excessive charge intercalation after long-term cycling results in limited charge capacitance and unsatisfactory cycling stability. In this work, we demonstrate an innovative method to increase PANI's electrochromic and energy storage performance by incorporating MXene, to enhance electrochemical activity and reveal more active areas of ion/electron intercalation/deintercalation and charge transfer.

Feasibility of dose calculation for treatment plans using electron density maps from a novel dual-layer detector spectral CT simulator.

Background: Conventional single-energy CT can only provide a raw estimation of electron density (ED) for dose calculation by developing a calibration curve that simply maps the HU values to ED values through their correlations. Spectral CT, also known as dual-energy CT (DECT) or multi-energy CT, can generate a series of quantitative maps, such as ED maps. Using spectral CT for radiotherapy simulations can directly acquire ED information without developing specific calibration curves.

ResNet14Attention network for identifying the titration end-point of potassium dichromate.

With the rapid development of industry, the increasing discharge of sewage causes the detection of water quality to be of increasing importance. Potassium dichromate titration is one of the most important testing methods in water quality detection; the ability to accurately identify the titration end-point of potassium dichromate is currently a research challenge. To identify titration end-point quickly and accurately, this study proposes a ResNet14Attention network, which utilizes residual modules that focus on original image information and an attention mechanism that focuses highly on classification targets.

Low-Spin Fe Redox-Based Prussian Blue with excellent selective dual-band electrochromic modulation and energy-saving applications.

Dual-band electrochromic materials (DBEMs) are of utmost importance for smart windows to realize independent control of the visible (VIS) and near-infrared (NIR) light. However, very few single-component DBEMs are capable of independently and effectively controlling both VIS and NIR light. Here, we present Prussian blue (PB) with remarkable performance to replace the composite DBEMs that require deliberate design and complicated preparation.

The protective role of Neuregulin1-ErbB4 signaling in a chronic social defeat stress model.

Major depressive disorder (MDD) is a highly prevalent debilitating psychiatric disease and a serious public health problem worldwide. Brain structural MRI and postmortem studies on patients with depression have revealed changes in the anatomy and functionality in various brain regions, including the amygdala, thalamus, hippocampus, and prefrontal cortex (PFC). The alterations in these brain regions could be a result, in part, of the dysregulation of the neurotrophic factors.

Electrochromic WO thin films attain unprecedented durability by potentiostatic pretreatment.

Electrochromic windows and glass facades are able to impart energy efficiency jointly with indoor comfort and convenience. Long-term durability is essential for practical implementation of this technology and has recently attracted broad interest. Here we show that a simple potentiostatic pretreatment of sputter-deposited thin films of amorphous WO-the most widely studied electrochromic material-can yield unprecedented durability for charge exchange and optical modulation under harsh electrochemical cycling in a Li-ion-conducting electrolyte and effectively evades harmful trapping of Li.

Patterned polyaniline encapsulated in titania nanotubes for electrochromism.

In this article, we report the preparation of a TiO nanotube array (TNA) film used as a transparent electrochromic material and a TNA/polyaniline patterned hybrid electrochromic film utilized as an information display material. The TNA film was fabricated by an anodizing process, and a surface patterned TNA with extreme wettability contrast (hydrophilic/hydrophobic) on a TNA surface through self-assembly (SAM) and photocatalytic lithography is fabricated. Then the TNA/polyaniline hybrid film was prepared by electrodeposition of aniline in an aqueous solution.

Electrochemical Rejuvenation of Anodically Coloring Electrochromic Nickel Oxide Thin Films.

Nickel oxide thin films are of major importance as anodically coloring components in electrochromic smart windows with applications in energy-efficient buildings. However, the optical performance of these films degrades upon extended electrochemical cycling, which has hampered their implementation. Here, we use a potentiostatic treatment to rejuvenate degraded nickel oxide thin films immersed in electrolytes of LiClO in propylene carbonate.

Improved Electrochemical Cycling Durability in a Nickel Oxide Double-Layered Film.

For the first time, a crystalline-amorphous double-layered NiO film has been prepared by reactive radio frequency magnetron sputtering. This film has exhibited improved electrochemical cycling durability, whereas other electrochromic parameters have been maintained at the required level, namely, a short coloration/bleaching time (0.8 s/1.

Improved Electrochromic Performance of Poly(3,4-ethylenedioxythiophene) by Incorporating a Three-Dimensionally Ordered Macroporous Structure.

In this paper, three-dimensionally ordered macroporous (3DOM) poly(3,4-ethylenedioxythiophene) (PEDOT) films were electropolymerized from an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim]PF ). The electrochromic performances of the 3DOM PEDOT films were studied. The 3DOM films exhibited high transmittance modulation (41.

Hydrogen photochromism in Nb2O5 powders.

In this paper, we report on the hydrogen photochromism in Nb2O5 powders with different structures. Four different powder phases were prepared by calcining Nb2O5·nH2O powders at various temperatures, and their morphology, structure, and electronic band structure were characterized by scanning electron microscopy, structural analyses, thermogravimetric analysis, differential scanning calorimetry, and optical spectroscopy. Nb2O5 powders with different structures and very different properties were formed after different high-temperature treatments of the polymorphous oxide.

Nanometer fluorescent hybrid silica particle as ultrasensitive and photostable biological labels.

Nanometer-sized fluorescent hybrid silica (NFHS) particles were prepared for use as sensitive and photostable fluorescent probes in biological staining and diagnostics. The first step of the synthesis involves the covalent modification of 3-aminopropyltrimethoxysilane with an organic fluorophore, such as fluorescein isothiocyanate, under N2 atmosphere for getting a fluorescent silica precursor. Then the NFHS particles, with a diameter of well below 40 nm, were prepared by controlled hydrolysis of the fluorescent silica precursor with tetramethoxysilane (TMOS) using the reverse micelle technique.

Flow injection fluorescence immunoassay for gentamicin using sol-gel-derived mesoporous biomaterial.

Sol-gel-derived mesoporous biomaterials were used for the first time in the flow-injection fluorescence immunoassay system. Anti-gentamicin antibody was immobilized in a mesoporous sol-gel material using tetramethoxysilane as a precursor and poly(ethylene glycol) as a template. The sol-gel glass was used to develop an immunoaffinity column for the flow-injection immunoassay of gentamicin.