Fluorinated dendrimer-mediated miR-30a delivery regulates the inflammation of macrophages and mitigates the symptoms of rheumatoid arthritis.

Abnormal expression of microRNAs (miRNAs) plays a significant role in the pathogenesis of rheumatoid arthritis (RA), and thus miRNA-based therapy has emerged as a promising approach for the RA treatment. Herein, miR-30a was successfully screened and identified to be an essential mediator for the inflammation of RA. MiR-30a could directly target the Snai1 gene and further regulate the Cad11 expression to inhibit the NF-κB and MAPK signaling pathways, contributing to the anti-inflammatory effect.

Amphipathic Astaxanthin Additive for Low Voltage-loss Perovskite Solar Cells With Enhanced Quasi-Fermi Level Splitting and Solar Hydrogen Production Application.

Even though the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is nearly approaching the Schottky-Queisser limit, low open-circuit voltage (V) and severe V loss problems continue to impede the improvement of PCEs. Astaxanthin (ASTA) additive is introduced in the formamidinium lead triiodide (FAPbI) perovskite film as an additive, which can facilitate the transportation of charge carriers and interact with Pb by its distinctive groupings. Furthermore, the addition of ASTA decreases the defect's active energy, regulates the deep-level defect by filling up the grain boundaries (GBs), and promotes the crystallization of perovskite film.

Electrocatalytic Valorization of Nitrate and Polyester Plastic for Simultaneous Production of Ammonia and Glycolic Acid.

Electrochemical upcycling of nitrate and polyester plastic into valuable products is an ideal solution to realize the resource utilization. Here, the co-production of ammonia (NH) and glycolic acid (GA) via electrochemical upcycling of nitrate and polyethylene terephthalate (PET) plastics over mesoporous PdAu film on Ni foam (mPdAu/NF), which is synthesized by micelle-assisted replacement method, is proposed. The mPdAu/NF with well-developed mesoporous structure provides abundant active sites and facilitated transfer channels and strong electronic effect.

Amorphous/crystalline RhFeP metallene for hydrazine-assisted water splitting.

Replacing the slow oxygen evolution reaction with favorable hydrazine oxidation reaction (HzOR) is a green and efficient way to produce hydrogen. In this work, we synthesize amorphous/crystalline RhFeP metallene via phase engineering and heteroatom doping. RhFeP metallene has good catalytic activity and stability for HER and HzOR, and only an ultralow voltage of 18 mV is required to achieve 10 mA cmin a two-electrode hydrazine-assisted water splitting system.

Interstitial Boron-Modulated Porous Pd Nanotubes for Ammonia Electrosynthesis.

Electrochemical conversion of nitrogen into ammonia at ambient conditions as a sustainable approach has gained significant attention, but it is still extremely challenging to simultaneously obtain a high faradaic efficiency (FE) and NH yield. In this work, the interstitial boron-doped porous Pd nanotubes (B-Pd PNTs) are constructed by combining the self-template reduction method with boron doping. Benefiting from distinctive one-dimensional porous nanotube architectonics and the incorporation of the interstitial B atoms, the resulting B-Pd PNTs exhibit high NH yield (18.

Interface Engineering and Boron Modification of Pd-B/Pd Hetero-Metallene Synergistically Accelerate Oxygen Reduction Catalysis.

2D metallene possess high surface area and excellent electron transport capability, thus enabling efficient application in oxygen reduction reaction (ORR). However, the interface regulation and electronic structure optimization of metallene are still great challenges. Herein, Pd-B/Pd hetero-metallene is constructed by interface engineering and B modification strategies for efficient electrocatalytic ORR.

Phosphorus-induced activation of Ir metallene for efficient acidic overall water electrolysis.

In this work, we synthesize P-doped Ir metallene (P-Ir metallene) with rich defects as a highly active bifunctional catalyst towards the hydrogen evolution reaction and oxygen evolution reaction, requiring overpotentials of 28 and 279 mV to drive 10 mA cm in 0.5 M HSO, respectively. Moreover, P-Ir metallene exhibits excellent electrocatalytic performance for overall water splitting, producing hydrogen at 10 mA cm with a low operation voltage of 1.

PdCu Bimetallene for Enhanced Oxygen Reduction Electrocatalysis.

Engineering two-dimensional (2D) metallic nanomaterials has attracted numerous research interests for oxygen reduction reaction (ORR) due to their highly exposed unsaturated metal atoms and excellent physicochemical properties. Herein, we report a CO-confined growth strategy for the synthesis of 2D PdCu bimetallene with several atomic layers for ORR. The incorporation of Cu into Pd metallene can generate strain effect and change the electronic structure, weakening the interaction between Pd and CO and suppressing the adsorption of CO.

Defect-Rich PdIr Bimetallene Nanoribbons with Interatomic Charge Localization for Isopropanol-Assisted Seawater Splitting.

Metallene with outstanding physicochemical properties is an efficient two-dimensional electrocatalysts for sustainable hydrogen (H ) production applications. However, the controllable fabrication of extended atomically thin metallene nanoribbons remains a formidable challenge. Herein, this work proposes a controllable preparation strategy for atomically thin defect-rich PdIr bimetallene nanoribbons (PdIr BNRs) with a thickness of only 1.

Interfacial Engineering of Au@NbCT-MXene Modulates the Growth Strain, Suppresses the Auger Recombination, and Enables an Open-Circuit Voltage of over 1.2 V in Perovskite Solar Cells.

Defects at the interface of charge transport layers can cause severe charge accumulation and poor charge transferability, which greatly affect the efficiency and stability of stannic oxide (SnO)-based perovskite solar cells (PSCs). Herein, a new type of MXene (NbCT-MXene) is applied to the interface of SnO layers to passivate the interfacial defects and promote charge transport. NbCT-MXene in PSCs realizes the role of boosting the conductivity, reducing the tin vacancies in the interstitial void of the SnO layer, decreasing the defect density, and aligning the bandgap.

Dichotomous Roles of in Macrophages and Fibroblasts in Bleomycin-Induced Pulmonary Fibrosis.

Pulmonary fibrosis therapy is limited by the unclear mechanism of its pathogenesis. C57BL/6 mice were used to construct the pulmonary fibrosis model in this study. The results showed that , which encodes menin protein, was significantly downregulated in bleomycin (BLM)-induced pulmonary fibrosis.

Noxa and Puma genes regulated by hTERT promoter can mitigate growth and induce apoptosis in hepatocellular carcinoma mouse model.

With significant high incidence and death rates, liver cancer has become one of the most common cancers all over the world. Hence, novel strategies are needed for the management of this malignancy. Apoptotic related proteins and are the members of BH3-only family.

Cell membrane breakage and triggering T cell infiltration are involved in human telomerase reverse transcriptase (hTERT) promoter-driven novel peptide KK-64 for liver cancer gene therapy.

Liver cancer is an aggressive malignancy with exhibits both high mortality and morbidity. The current treatment options are associated with several limitations, novel specific anti-cancer drugs are urgently needed to improve liver cancer treatment. In this study, a new peptide KK-64 was designed, and it showed strong cytotoxicity against liver cancer cells.

PdNi/Ni Nanotubes Assembled by Mesoporous Nanoparticles for Efficient Alkaline Ethanol Oxidation Reaction.

The optimization of structure and composition is essential to improve the performance of catalysts. Herein, mesoporous nanoparticles assembled PdNi/Ni nanotubes (mPdNi/Ni NTs) are successfully fabricated using nickel nanowires as sacrificial template. The combination of nanotubular structure with mesoporous nanoparticle morphology can provide facilitated transfer channels and sufficient active sites, allowing the full contact and reaction between catalysts and reactants.

Ternary AuPS Alloy Mesoporous Film for Efficient Electroreduction of Nitrogen to Ammonia.

Electrocatalytic nitrogen reduction is a promising strategy to produce ammonia with low energy consumption and an ambient operation condition. Owing to extreme difficulties in nitrogen activation, the design of high-efficiency electrocatalysts is still a great challenge. This work proposes a versatile electrodeposition strategy to construct P, S-codoped Au mesoporous film on carbon paper (mAuPS/CP) using polystyrene--poly (ethylene oxide) micelles as surfactants.

Engineering One-Dimensional AuPd Nanospikes for Efficient Electrocatalytic Nitrogen Fixation.

Designing one-dimensional (1D) bimetallic nanomaterials is of great significance for electrochemical nitrogen fixation. Inspired by this, 1D AuPd nanospikes (AuPd NSs) composed with internal Au nanowire and external Pd nanohumps were fabricated by a flexible low-temperature wet-chemical method. Benefiting from the excellent electron transport efficiency of the 1D material and the accessible surface area provided by the unique nanospike-like structure, AuPd NSs exhibit outstanding nitrogen reduction reaction performance with an NH yield rate of 16.

Engineering bunched RhTe nanochains for efficient methanol oxidation electrocatalysis.

Herein, a two-step method is proposed to synthesize bunched RhTe nanochains (RhTe NCs) using Te nanowires and formic acid both as a reductant and a structure-directing agent. The resultant RhTe NCs possess a high electrochemical active surface area of 89.3 m g, and exhibit superior catalytic activity and durability towards the electro-oxidation of methanol in an alkaline medium.

B-Doped PdRu nanopillar assemblies for enhanced formic acid oxidation electrocatalysis.

Adjusting the morphology and composition of Pd-based materials is a promising strategy to improve their performance for the electrocatalytic formic acid oxidation reaction (FAOR). In this work, we report the preparation of B-doped PdRu nanopillar assemblies (B-PdRu NPAs) by a two-step method using NaBH4 as the boron dopant. On combining the hyper-branched structure and the multi-component synergistic effect, B-PdRu NPAs achieve a high mass activity of 1.

Three-dimensional Pd-Ag-S porous nanosponges for electrocatalytic nitrogen reduction to ammonia.

Electrochemical nitrogen reduction reaction (NRR) provides a facile and sustainable route to synthesize ammonia. The preparation of efficient and high-performance catalysts is one of the most important issues in large-scale applications of the electrochemical synthesis of ammonia. Herein, we have devised a simple method to fabricate three-dimensional palladium-silver-sulphur porous nanosponges (Pd-Ag-S PNSs) under room temperature.