Glycosylated flavonoid kaempferitrin: Electroanalytical detection and the proposal of an oxidation mechanism supported by quantum chemical calculations.

In this work, the electrochemical behavior of the glycosylated flavonoid kaempferitrin was studied, and an electroanalytical methodology was developed for its determination in infusions of Bauhinia forficata using a boron-doped diamond electrode (BDD). The electrochemical behavior of the flavonoid was studied by cyclic voltammetry, and two irreversible oxidation peaks at 0.80 and 1.

Photochemical and photophysical properties of tetracarboxylic acid phthalocyanines from glycolic and lactic acids in homogeneous and micro heterogeneous media.

Glycolic acid and lactic acid substituted zinc phthalocyanines were studied concerning their photophysical and photochemical properties in eight organic solvents (homogeneous medium) and in aqueous media with the presence of CTAB and PVP 360 surfactants. Solvent effects were investigated according to several physical solvent parameters, including studies that used more than one parameter at a time, such as the E(30) scale and the Lippet-Mataga equation. Computational studies were realized and was found in good agreement with experimental data indicating J-type dimers' formation through hydrogen bonds, which may not affect the spectroscopic properties.

Pluronic-loaded Silver Nanoparticles/Photosensitizers Nanohybrids: Influence of the Polymer Chain Length on Metal-enhanced Photophysical Properties.

Silver nanoparticles (AgNPs) are incredibly versatile nanostructures that more recently have been exploited to create advanced optoelectronic materials due enhancement of local magnetic field after its irradiation. However, the use of AgNPs as nanoantennas to amplify photophysical properties of close photosensitizer (PS) molecules in photodynamic therapy is still underexplored. The reason for that is the difficulty to control crucial parameters such as silver-PS distance in aqueous solution.

Universal adhesive: the effect of different simulated pulpal pressure fluids and bonding modes to dentin.

The aim of this study was to evaluate the effect of SPP with either fetal bovine serum (FBS) or deionized water (DW) on the bond strength (μTBS) of a Universal adhesive to dentin, in both etch-and-rinse (ER) and self-etch (SE) modes. The kinematic viscosity (cSt) of FBS and DW was measured at 25 °C ± 0.1 ºC.

Theranostic verteporfin- loaded lipid-polymer liposome for photodynamic applications.

In this study we report a novel theranostic lipid-polymer liposome, obtained from DPPC and the triblock copolymer F127 covalently modified with 5(6)-carboxyfluorescein (CF) for photodynamic applications. Due to the presence of F127, small unilamellar vesicle (SUV) liposomes were synthesized by a simple and fast thin-film hydration method without the need for an extrusion process. The vesicles have around 100 nm, low polydispersity and superb solution stability.

Synthesis of Pluronic-based silver nanoparticles/methylene blue nanohybrids: Influence of the metal shape on photophysical properties.

Nanotechnology development provides new strategies to improve different treatment modalities by integration of multiple molecules in a single multifunctional nanoparticle. In this scenario, we highlight silver nanoparticles (AgNPs) favorable optical properties such as absorption and emission of light in the visible region of the spectrum. This allows its synergic combination with the photosensitizer molecule methylene blue (MB) in order to improve outcomes in photodynamic-based therapies.

Removal of Orange II (OII) dye by simulated solar photoelectro-Fenton and stability of WO/Vulcan XC72 gas diffusion electrode.

The objectives of this study were to determine the viability of removing Orange II (OII) dye by simulated solar photoelectro-Fenton (SSPEF) and to evaluate the stability of a WO/Vulcan XC72 gas diffusion electrode (GDE) and thus determine its best operating parameters. The GDE cathode was combined with a BDD anode for decolorization and mineralization of 350 mL of 0.26 mM OII by anodic oxidation with electrogenerated HO (AO-HO), electro-Fenton (EF) and photoelectro-Fenton (PEF) at 100, 150 and 200 mA cm and SSPEF at 150 mA cm.

Mechanical-physicochemical properties and biocompatibility of catechin-incorporated adhesive resins.

Objectives: Several anti-proteolytic dentin therapies are being exhaustively studied in an attempt to reduce dentin bond degradation and improve clinical performance and longevity of adhesive restorations. This study assessed the effect of epigallocatechin-3-gallate (EGCG) on long-term bond strength when incorporated into adhesives.

Material And Methods: Adhesive systems were formulated with EGCG concentrations of 0 wt%: (no EGCG; control); 0.

Effect of Nd:YAG laser on the solvent evaporation of adhesive systems.

Objective: This study evaluated the influence of Nd:YAG laser on the evaporation degree (ED) of the solvent components in total-etch and self-etch adhesives.

Materials And Methods: The ED of Gluma Comfort Bond (Heraeus-Kulzer) one-step self-etch adhesive, and Adper Single Bond 2 (3M ESPE), and XP Bond (Dentsply) total-etch adhesives was determined by weight alterations using two techniques: Control--spontaneous evaporation of the solvent for 5 min; Experimental--Nd:YAG laser irradiation for 1 min, followed by spontaneous evaporation for 4 min. The weight loss due to evaporation of the volatile components was measured at baseline and after 10 s, 20 s, 30 s, 40 s, 50 s, 60 s, 70 s, 80 s, 90 s, 100 s, 110 s, 2 min, 3 min, 4 min, and 5 min.

Use of chitosan in the treatment of obesity: evaluation of interaction with vitamin B12.

Is well known that obesity has increased significantly in recent times and therefore many dietary supplements, synthetic or natural, have been proposed in order to prevent and/or to treat obesity or overweight. Chitosan, a polysaccharide with ability to act as a carrier and to absorb fat, has been used for this purpose. However, interactions with other molecules present in the body may also occur and, therefore, the purpose of this study was to evaluate interactions of chitosan with vitamin B12.

Self-aggregation processes of 1,6-diphenyl-1,3,5-hexatriene in water/ethanol mixtures with high water percentages.

This work describes the behavior of 1,6-diphenyl-1,3,5-hexatriene (DPH) in ethanol/water mixtures. The dependence of DPH photophysical properties (absorption and fluorescence emission) on the water percentage in ethanol indicates that DPH undergoes self-aggregation processes in solvent conditions above a critical water content. Evidence such as an additional absorption band, Beer's law deviation, kinetic behavior, and other experimental results obtained from temperature variation and surfactant addition demonstrated the presence of several types of DPH aggregates.

Properties of chlorophyll and derivatives in homogeneous and microheterogeneous systems.

Chlorophyll (Mg-Chl) and its derivatives, zinc chlorophyll (Zn-Chl), copper chlorophyll (Cu-Chl), pheophytin (Pheo), pheophorbide (Pheid), and zinc chlorophyllide (Zn-Chld), were studied as to their acid-base equilibrium properties, hydrophobicity, stability, binding, and relative localization in neutral surfactant micellar systems. The stability order of metalochlorophyll (pH(M)) in acidic medium was found to be Cu-Chl > Zn-Chld > Zn-Chl > Mg-Chl. The apparent pK(a) for protonation of porphyrin ring nitrogens was around 1.

pKa determinations of xanthene derivates in aqueous solutions by multivariate analysis applied to UV-Vis spectrophotometric data.

Xanthenes form to an important class of dyes which are widely used. Most of them present three acid-base groups: two phenolic sites and one carboxylic site. Therefore, the pKa determination and the attribution of each group to the corresponding pKa value is a very important feature.

Effects of metal and the phytyl chain on chlorophyll derivatives: physicochemical evaluation for photodynamic inactivation of microorganisms.

Chlorophyll compounds and their derivatives containing metal or phytyl chain can be used as photosensitizer in photodynamic inactivation of microorganisms (PDI). So, the physicochemical properties and antimicrobial effect of chlorophyll derivatives were investigated: Mg-chlorophyll (Mg-Chl), Zn-chlorophyll (Zn-Chl), Zn-chlorophyllide (Zn-Chlde), Cu-chlorophyll (Cu-Chl), pheophytin (Pheo) and pheophorbide (Pheid). The photobleaching experiments showed photostability according to Cu-Chl > Pheo ∼ Pheid ≫ Zn-Chl ∼ Zn-Chlde > Mg-Chl.

Use of chitosan in the treatment of obesity: evaluation of interaction with vitamin B2.

Obesity is a serious health problem and its prevalence has increased over the years. Studies have assessed the polysaccharide chitosan as anti-obesity supplement due to its ability to absorb fats. However, this property may cause the interaction of chitosan with essential substances for the proper functioning of the body, such as vitamins.

Spectrofluorimetric determination of coumarin in commercial tablets.

A simple, rapid and effective analytical method based on fluorescence spectroscopy for the determination of coumarin in pharmaceutical formulations without pre-treatment or pre-concentration step was development. Coumarin had maximum excitation and emission at 310 nm and 390 nm, respectively. Optimum conditions for the detection of coumarin were investigated.

Optical characterization in annatto and commercial colorific.

Nowadays, the synthetic dyes (as erythrosine, ponceau and tartrazina) and natural colourants (as annatto, paprika, curcuma and anthocyanin) are indispensable in the food, pharmaceutical and cosmetics applications. However, the use of natural colourant has been considered safer for human consumption then synthetic dye. For practical applications of the coloring, optical properties are important for the understanding of the characteristics of them.

Spectrofluorimetric determination of second critical micellar concentration of SDS and SDS/Brij 30 systems.

Potentially useful stead-state fluorimetric technique was used to determine the critical micellar concentrations (CMC(1) and CMC(2)) for two micellar media, one formed by SDS and the other by SDS/Brij 30. A comparative study based on conductimetric and surfacial tension measurements suggests that the CMC(1) estimated by the fluorimetric method is lower than the value estimated by these other techniques. Equivalent values were observed for SDS micelles without Brij 30 neutral co-surfactant.

Solvent effects on the photophysics of 3-(benzoxazol-2-yl)-7-(N,N-diethylamino)chromen-2-one.

The photophysics of 3-(benzoxazol-2-yl)-7-(N,N-diethylamino)chromen-2-one was studied in different solvents and in SDS micelles. This compound presents characteristics which include an S(0)---> S(1) ( pi,pi*) transition with a (1)(n,pi*) perturbative component, due to the electronic coupling between the diethylamino group and the coumarin ring, considerable solvatochromism, dual fluorescence and high fluorescence quantum yields in almost all solvents studied. The electronic structure of the S(1) and S(2) excited states permits vibronic coupling between them, making configurational changes of the S(2) excited state possible, leading to the formation of an S(2)(TICT) state.

Preparation of silver nanoprisms using poly(N-vinyl-2-pyrrolidone) as a colloid-stabilizing agent and the effect of silver nanoparticles on the photophysical properties of cationic dyes.

The synthesis of silver nanoprisms in aqueous solution using poly(N-vinyl-2-pyrrolidone) (PVP) with different molecular weights (29, 55 and 1300 kg mol(-1)) as a stabilizing agent is described. Low molecular weight PVP (55 kg mol(-1)) is indicated for the preparation of a stable blue solution containing Ag nanoprisms via extended irradiation of a yellow colloidal solution of nanospheres with polychromatic visible light. The fluorescence properties of some cationic dyes (acridine, 9-aminoacridine, Nile Blue and auramine), free and bound to poly(methacrylic acid), have been studied in the presence of different shaped Ag colloidal particles in solution.