Chemical Epitaxy of Iridium Oxide on Tin Oxide Enhances Stability of Supported OER Catalyst.

Significantly reducing the iridium content in oxygen evolution reaction (OER) catalysts while maintaining high electrocatalytic activity and stability is a key priority in the development of large-scale proton exchange membrane (PEM) electrolyzers. In practical catalysts, this is usually achieved by depositing thin layers of iridium oxide on a dimensionally stable metal oxide support material that reduces the volumetric packing density of iridium in the electrode assembly. By comparing two support materials with different structure types, it is shown that the chemical nature of the metal oxide support can have a strong influence on the crystallization of the iridium oxide phase and the direction of crystal growth.

Towards a realistic prediction of catalyst durability from liquid half-cell tests.

Liquid half-cell measurements provide a convenient laboratory method for determining relevant parameters of electro-catalysts applied in polymer electrolyte membrane fuel cells. While these measurements may be effective in certain contexts, their applicability to real-world systems, such as single-cells in a membrane electrode assembly (MEA) configuration, is not always clear. This is particularly true when assessing the stability of these systems through accelerated stress tests (ASTs).

Three-dimensional nanoimaging of fuel cell catalyst layers.

Catalyst layers in proton exchange membrane fuel cells consist of platinum-group-metal nanocatalysts supported on carbon aggregates, forming a porous structure through which an ionomer network percolates. The local structural character of these heterogeneous assemblies is directly linked to the mass-transport resistances and subsequent cell performance losses; its three-dimensional visualization is therefore of interest. Herein we implement deep-learning-aided cryogenic transmission electron tomography for image restoration, and we quantitatively investigate the full morphology of various catalyst layers at the local-reaction-site scale.

Surface Oxygen Depletion of Layered Transition Metal Oxides in Li-Ion Batteries Studied by Ambient Pressure X-ray Photoelectron Spectroscopy.

A new spectro-electrochemical setup was developed to study oxygen depletion from the surface of layered transition metal oxide particles at high degrees of delithiation. An NCM111 working electrode was paired with a chemically delithiated LiFePO counter electrode in a fuel cell-inspired membrane electrode assembly (MEA). A propylene carbonate-soaked Li-ion conducting ionomer served as an electrolyte, providing both good electrochemical performance and direct probing of the NCM111 particles during cycling by ambient pressure X-ray photoelectron spectroscopy.

On the role of pore constrictions in gas diffusion electrodes.

Water management by gas diffusion electrodes is a fundamental aspect of the performance of electrochemical cells. Herein, we introduce the characteristic constrictions size as a descriptor for microporous layers (MPL). This parameter is calculated by volumetric analysis of focused ion beam nanotomography and compared to mercury intrusion porosimetry measurements.

H Evolution from Electrocatalysts with Redox-Active Ligands: Mechanistic Insights from Theory and Experiment vis-à-vis Co-Mabiq.

Electrocatalytic hydrogen production via transition metal complexes offers a promising approach for chemical energy storage. Optimal platforms to effectively control the proton and electron transfer steps en route to H evolution still need to be established, and redox-active ligands could play an important role in this context. In this study, we explore the role of the redox-active Mabiq (Mabiq = 2-4:6-8-bis(3,3,4,4-tetramethlyldihydropyrrolo)-10-15-(2,2-biquinazolino)-[15]-1,3,5,8,10,14-hexaene1,3,7,9,11,14-N) ligand in the hydrogen evolution reaction (HER).

Li-ion half-cells studied during cycling by small-angle neutron scattering.

Small-angle neutron scattering (SANS) was recently applied to the and study of the charge/discharge process in Li-ion battery full-cells based on a pouch cell design. Here, this work is continued in a half-cell with a graphite electrode cycled a metallic lithium counter electrode, in a study conducted on the SANS-1 instrument of the neutron source FRM II at the Heinz Maier-Leibnitz Zentrum in Garching, Germany. It is confirmed that the SANS integrated intensity signal varies as a function of graphite lithiation, and this variation can be explained by changes in the squared difference in scattering length density between graphite and the electrolyte.

Direct PtSn Alloy Formation by Pt Electrodeposition on Sn Surface.

Electrochemical deposition is a viable approach to develop novel catalyst structures, such as Pt thin films on conductive support materials. Most studies, reaching out to control electrochemical deposition of Pt to monolayer quantities focus on noble metal substrates (e.g.

Fast Lithium Ion Conduction in Lithium Phosphidoaluminates.

Solid electrolyte materials are crucial for the development of high-energy-density all-solid-state batteries (ASSB) using a nonflammable electrolyte. In order to retain a low lithium-ion transfer resistance, fast lithium ion conducting solid electrolytes are required. We report on the novel superionic conductor Li AlP which is easily synthesised from the elements via ball-milling and subsequent annealing at moderate temperatures and which is characterized by single-crystal and powder X-ray diffraction.

Fast Ionic Conductivity in the Most Lithium-Rich Phosphidosilicate LiSiP.

Solid electrolytes with superionic conductivity are required as a main component for all-solid-state batteries. Here we present a novel solid electrolyte with three-dimensional conducting pathways based on "lithium-rich" phosphidosilicates with ionic conductivity of σ > 10 S cm at room temperature and activation energy of 30-32 kJ mol expanding the recently introduced family of lithium phosphidotetrelates. Aiming toward higher lithium ion conductivities, systematic investigations of lithium phosphidosilicates gave access to the so far lithium-richest compound within this class of materials.

Singlet Oxygen Reactivity with Carbonate Solvents Used for Li-Ion Battery Electrolytes.

High degrees of delithiation of layered transition metal oxide cathode active materials (NCMs and HE-NCM) for lithium-ion batteries (LIBs) was shown to lead to the release of singlet oxygen, which is accompanied by enhanced electrolyte decomposition. Here, we study the reactivity of chemically produced singlet oxygen with the commonly used cyclic and linear carbonate solvents for LIB electrolytes. On-line gassing analysis of the decomposition of ethylene carbonate (EC) and dimethyl carbonate (DMC) reveals different stability toward the chemical attack of singlet oxygen, which is produced in situ by photoexcitation of the Rose Bengal dye.

Ionic Conductivity Measurements-A Powerful Tool for Monitoring Polyol Reduction Reactions.

The reduction of metal precursors during the polyol synthesis of metal nanoparticles was monitored by ex situ ionic conductivity measurements. Using commonly used platinum precursors (KPtCl, HPtCl, and KPtCl) as well as iridium and ruthenium precursors (IrCl and RuCl), we demonstrate that their reduction in ethylene glycol at elevated temperatures is accompanied by a predictable change in ionic conductivity, enabling a precise quantification of the onset temperature for their reduction. This method also allows detecting the onset temperature for the further reaction of ethylene glycol with HCl produced by the reduction of chloride-containing metal precursors (at ≈120 °C).

Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive Carbon.

We compare the stability of alkyl carbonate electrolyte on NMC111, -622, and -811, LNMO, and conductive carbon electrodes. We prove that CO and CO evolution onset potentials depend on the electrode material and increase in the order NMC811 < NMC111 ≈ NMC622 < conductive carbon ≈ LNMO, which we rationalize by two fundamentally different oxidation mechanisms, the chemical and the electrochemical electrolyte oxidation. Additionally, in contrast to the widespread understanding that transition metals in cathode active materials catalyze the electrolyte oxidation, we will prove that such a catalytic effect on the electrochemical electrolyte oxidation does not exist.

Probing Transition-Metal Silicides as PGM-Free Catalysts for Hydrogen Oxidation and Evolution in Acidic Medium.

In this experimental study, we investigate various transition-metal silicides as platinum-group-metal-(PGM)-free electrocatalysts for the hydrogen oxidation reaction (HOR), and for the hydrogen evolution reaction (HER) in acidic environment for the first time. Using cyclic voltammetry in 0.1 M HClO₄, we first demonstrate that the tested materials exhibit sufficient stability against dissolution in the relevant potential window.

Lithium Ion Mobility in Lithium Phosphidosilicates: Crystal Structure, Li, Si, and P MAS NMR Spectroscopy, and Impedance Spectroscopy of Li SiP and Li SiP.

The need to improve electrodes and Li-ion conducting materials for rechargeable all-solid-state batteries has drawn enhanced attention to the investigation of lithium-rich compounds. The study of the ternary system Li-Si-P revealed a series of new compounds, two of which, Li SiP and Li SiP , are presented. Both phases represent members of a new family of Li ion conductors that display Li ion conductivity in the range from 1.

Singlet Oxygen Formation during the Charging Process of an Aprotic Lithium-Oxygen Battery.

Aprotic lithium-oxygen (Li-O2 ) batteries have attracted considerable attention in recent years owing to their outstanding theoretical energy density. A major challenge is their poor reversibility caused by degradation reactions, which mainly occur during battery charge and are still poorly understood. Herein, we show that singlet oxygen ((1) Δg ) is formed upon Li2 O2 oxidation at potentials above 3.

Stability of superoxide radicals in glyme solvents for non-aqueous Li-O2 battery electrolytes.

Glyme-based electrolytes were studied for the use in lithium-air batteries because of their greater stability towards oxygen reduction reaction intermediates (e.g., superoxide anion radicals (O2˙(-))) produced upon discharge at the cathode compared to previously employed carbonate-based electrolytes.

Rechargeability of Li-air cathodes pre-filled with discharge products using an ether-based electrolyte solution: implications for cycle-life of Li-air cells.

The instability of currently used electrolyte solutions and of the carbon support during charge-discharge in non-aqueous lithium-oxygen cells can lead to discharge products other than the desired Li2O2, such as Li2CO3, which is believed to reduce cycle-life. Similarly, discharge in an O2 atmosphere which contains H2O and CO2 impurities would lead to LiOH and Li2CO3 discharge products. In this work we therefore investigate the rechargeability of model cathodes pre-filled with four possible Li-air cell discharge products, namely Li2O2, Li2CO3, LiOH, and Li2O.

Surface composition tuning of Au-Pt bimetallic nanoparticles for enhanced carbon monoxide and methanol electro-oxidation.

The ability to direct bimetallic nanoparticles to express desirable surface composition is a crucial step toward effective heterogeneous catalysis, sensing, and bionanotechnology applications. Here we report surface composition tuning of bimetallic Au-Pt electrocatalysts for carbon monoxide and methanol oxidation reactions. We establish a direct correlation between the surface composition of Au-Pt nanoparticles and their catalytic activities.

Catalytic activity trends of oxygen reduction reaction for nonaqueous Li-air batteries.

We report the intrinsic oxygen reduction reaction (ORR) activity of polycrystalline palladium, platinum, ruthenium, gold, and glassy carbon surfaces in 0.1 M LiClO(4) 1,2-dimethoxyethane via rotating disk electrode measurements. The nonaqueous Li(+)-ORR activity of these surfaces primarily correlates to oxygen adsorption energy, forming a "volcano-type" trend.

A perovskite oxide optimized for oxygen evolution catalysis from molecular orbital principles.

The efficiency of many energy storage technologies, such as rechargeable metal-air batteries and hydrogen production from water splitting, is limited by the slow kinetics of the oxygen evolution reaction (OER). We found that Ba(0.5)Sr(0.

Design principles for oxygen-reduction activity on perovskite oxide catalysts for fuel cells and metal-air batteries.

The prohibitive cost and scarcity of the noble-metal catalysts needed for catalysing the oxygen reduction reaction (ORR) in fuel cells and metal-air batteries limit the commercialization of these clean-energy technologies. Identifying a catalyst design principle that links material properties to the catalytic activity can accelerate the search for highly active and abundant transition-metal-oxide catalysts to replace platinum. Here, we demonstrate that the ORR activity for oxide catalysts primarily correlates to σ-orbital (e(g)) occupation and the extent of B-site transition-metal-oxygen covalency, which serves as a secondary activity descriptor.

Platinum-gold nanoparticles: a highly active bifunctional electrocatalyst for rechargeable lithium-air batteries.

PtAu nanoparticles (NPs) were shown to strongly enhance the kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in rechargeable Li-O(2) cells. Li-O(2) cells with PtAu/C were found to exhibit the highest round-trip efficiency reported to date. During ORR via xLi(+) + O(2) + xe(-) --> Li(x)O(2), the discharge voltage with PtAu/C was considerably higher than that of pure carbon and comparable to that of Au/C.