A porous network of boron-doped IrO nanoneedles with enhanced mass activity for acidic oxygen evolution reactions.

While proton exchange membrane water electrolyzers (PEMWEs) are essential for realizing practical hydrogen production, the trade-off among activity, stability, and cost of state-of-the-art iridium (Ir)-based oxygen evolution reaction (OER) electrocatalysts for PEMWE implementation is still prohibitively challenging. Ir minimization coupled with mass activity improvement of Ir-based catalysts is a promising strategy to address this challenge. Here, we present a discovery demonstrating that boron doping facilitates the one-dimensional (1D) anisotropic growth of IrO crystals, as supported by both experimental and theoretical evidence.

Effect of Carbon Layer Thickness on the Electrocatalytic Oxidation of Glucose in a Ni/BDD Composite Electrode.

High-performance non-enzymatic glucose sensor composite electrodes were prepared by loading Ni onto a boron-doped diamond (BDD) film surface through a thermal catalytic etching method. A carbon precipitate with a desired thickness could be formed on the Ni/BDD composite electrode surface by tuning the processing conditions. A systematic study regarding the influence of the precipitated carbon layer thickness on the electrocatalytic oxidation of glucose was conducted.

Large-Scale and Highly Efficient Production of Ultrafine PVA Fibers by Electro-Centrifugal Spinning for NH Adsorption.

Ultrafine Polyvinyl alcohol (PVA) fibers have an outstanding potential in various applications, especially in absorbing fields. In this manuscript, an electrostatic-field-assisted centrifugal spinning system was designed to improve the production efficiency of ultrafine PVA fibers from PVA aqueous solution for NH adsorption. It was established that the fiber production efficiency using this self-designed system could be about 1000 times higher over traditional electrospinning system.

Thickness Effects on Boron Doping and Electrochemical Properties of Boron-Doped Diamond Film.

As a significant parameter in tuning the structure and performance of the boron-doped diamond (BDD), the thickness was focused on the mediation of the boron doping level and electrochemical properties. BDD films with different thicknesses were deposited on silicon wafers by the hot filament chemical vapor deposition (HFCVD) method. The surface morphology and composition of the BDD films were characterized by SEM and Raman, respectively.

Mussel-Inspired Surface Modification of α-Zirconium Phosphate Nanosheets for Anchoring Efficient and Reusable Ultrasmall Au Nanocatalysts.

The shortage of powerful functionalities on scalable α-zirconium phosphate (ZrP) materials blocks the facile preparation of highly dispersed and immobilized metal nanocatalysts. We herein present a mild and facile mussel-inspired strategy based on polydopamine (PDA) for the surface modification of ZrP, and hence, the generation of powerful functionalities at a high density for the straightforward reduction of chloroauric acid to Au nanoparticles (AuNPs) and the immobilization of AuNPs. The resulting ternary ZrP@PDA/Au exhibited ultra-small AuNPs with a particle size of around 6.

A hierarchical system of covalent and dual non-covalent crosslinks promotes the toughness and self-healing properties of polymer hydrogels.

While it is challenging to simultaneously achieve both high mechanical performance and self-healing ability within one polymer hydrogel network, we, herein, synthesized a novel class of hydrogels based on a combination of chemical and dual non-covalent crosslinks micellar polymerization of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate, end-capped by 2-hydroxyethyl methacrylate (IPDI-HEMA), with acrylamide (AM). The prepared hydrogels were demonstrated to possess a tensile elongation at a break of at least 1900%, a fracture energy of 138.4 kJ m, and remarkable self-healing behaviors (, a strong self-healing ability achieved at ambient temperature without the need for any stimulus or healing agent).

Highly tough and rapid self-healing dual-physical crosslinking poly(DMAA--AM) hydrogel.

Introducing double physical crosslinking reagents (, a hydrophobic monomer micelle and the LAPONITE® XLG nano-clay) into the copolymerization reaction of hydrophilic monomers of ,-dimethylacrylamide (DMAA) and acrylamide (AM) is reported here by a thermally induced free-radical polymerization method, resulting in a highly tough and rapid self-healing dual-physical crosslinking poly(DMAA--AM) hydrogel. The mechanical and self-healing properties can be finely tuned by varying the weight ratio of nanoclay to DMAA. The tensile strength and elongation at break of the resulting nanocomposite hydrogel can be modulated in the range of 7.

A novel Janus sponge fabricated by a green strategy for simultaneous separation of oil/water emulsions and dye contaminants.

A novel Janus sponge with the ability to remove complex contaminants from water is reported. Firstly, a superhydrophilic sponge (PA@PEI-sponge) is prepared via synthesizing negatively charged phytic acid@polyethyleneimine (PA@PEI) nanoparticles and assembling them on the surface of polydopamine (PDA) and PEI-modified polyurethane (PU) sponge through electrostatic adsorption. The Janus sponge is generated by modifying one side of the PA@PEI-sponge with PDMS, which exhibits superior separation efficiency and high filtration flux toward both water-in-oil and oil-in-water emulsions due to its multiplex selective wettability and the interconnected and tortuous 3D porous channels.

11 W YLF-based intra-cavity pumped Ho laser with near diffraction limited beam quality.

We develop a fluoride-based intra-cavity pumped Ho laser for the first time, where the severe thermal lensing of the intra-cavity pumping mechanism can be compensated by the negative thermal-optical property of the (YLF) host. A maximum output power of 11.3 W (-pol) at 2062 nm, corresponding to a conversion efficiency of 28.

Anisotropic thermal analyses of a high efficiency Tm:YAP slab laser and its intra-cavity pumping for Ho lasers.

We evaluate the thermal effects of a c-cut Tm:YAP slab laser by considering the anisotropic properties of the biaxial YAP crystal. Significant improvements in thermal stress were demonstrated by selecting the crystallographic a-axis, which possesses higher thermal conductivity and thermal expansion, as the direction of the slab thickness. A maximum laser power of 30 W (E//a) at 2 µm was obtained under an incident LD power of 55 W with an optical conversion efficiency of 55.

Biodegradable Polylactide/TiO Composite Fiber Scaffolds with Superhydrophobic and Superadhesive Porous Surfaces for Water Immobilization, Antibacterial Performance, and Deodorization.

In this short communication, TiO-nanoparticle-functionalized biodegradable polylactide (PLA) nonwoven scaffolds with a superhydrophobic and superadhesive surface are reported regarding their water immobilization, antibacterial performance, and deodorization. With numerous regular oriented pores on their surface, the as-fabricated electrospun porous PLA/TiO composite fibers possessed diameters in the range from 5 µm down to 400 nm, and the lengths were even found to be up to the meters range. The PLA/TiO composite fiber surface was demonstrated to be both superhydrophobic and superadhesive.

Selective Enrichment of Clenbuterol onto Molecularly Imprinted Polymer Microspheres with Tailor-made Structure and Oxygen Functionalities.

The noxious clenbuterol misapplied as the feed additive has posed an enormous threat to humans who actively rely on the food chains with high potential of contamination by clenbuterol, such as pork and beef. It is, therefore, highly desirable to develop novel materials and strategies for dealing with the clenbuterol. Herein, functional polymer microspheres prepared by Pickering emulsion polymerization were explored for the selective enrichment of the clenbuterol, and their structure and oxygen functionalities could be tailor-made by a molecular imprinting process.

Preparation and Properties of Polydimethylsiloxane (PDMS)/Polyethylene Glycol (PEG)-Based Amphiphilic Polyurethane Elastomers.

Amphiphilic polyurethane elastomers (APUE) were synthesized using a two-step polyaddition reaction based on the hydroxyl-terminated polydimethylsiloxane (PDMS) and polyethylene glycol (PEG) soft segments with the molecular weights ('s) of 2000 and 1000, respectively. The effects of the PDMS/PEG contents on the properties and structures of the APUE were investigated. It was found that the APUE possessed high elongation, moderate tensile strength, and good thermal properties.

Recent advances in two-dimensional transition metal dichalcogenides for biological sensing.

Layered transition metal dichalcogenides (TMDs) are important members in the family of two-dimensional (2D) materials. The large surface-to-volume ratio, combined with the fascinating tunable electronic and optical properties, low toxicity, unique van der Waals layered structure, and engineerable surface structure, renders 2D TMDs highly valuable for next-generation biosensing applications. Herein, the recent progress in the development of 2D TMDs-based biosensors is comprehensively reviewed, with special focus on the implementation of the structural, electronic and optical properties of 2D TMDs in the realization of high-performance biosensors with different configurations for a wide spectrum of bioanalytes and bio-species.

An iridescent film of porous anodic aluminum oxide with alternatingly electrodeposited Cu and SiO nanoparticles.

The structurally colored surface of anodic aluminum oxide (AAO) is highly useful for decoration and anti-counterfeiting applications, which are of significance for both scientific and industrial communities. This study presents the first demonstration of the fabrication of an iridescent film of porous AAO on an industrial aluminum alloy substrate, with alternatingly electrodeposited Cu and SiO nanoparticles (NPs). A rainbow effect was effectively obtained for the optimized sample with appropriate alternating electrodeposition times.

Functionalization of Molecularly Imprinted Polymer Microspheres for the Highly Selective Removal of Contaminants from Aqueous Solutions and the Analysis of Food-Grade Fish Samples.

The proliferation of pollution in aquatic environments has become a growing concernand calls for the development of novel adsorbents capable of selectively removing notorious andrecalcitrant pollutants from these ecosystems. Herein, a general strategy was developed for thesynthesis and functionalization of molecularly imprinted polymer microspheres (MIPs) that couldbe optimized to possess a significant adsorption selectivity to an organic pollutant in aqueousmedia, in addition to a high adsorption capacity. Considering that the molecular imprinting alonewas far from satisfactory to produce a high-performance MIPs-based adsorbent, further structuralengineering and surface functionalization were performed in this study.

Long noncoding RNA Mirt2 upregulates USP10 expression to suppress hepatic steatosis by sponging miR-34a-5p.

Non-alcoholic fatty liver disease (NAFLD) is always characterized by hepatic steatosis and insulin resistance. Dysregulated long noncoding RNAs regulate pathogenesis of NAFLD. However, the role of Mirt2 (long noncoding RNA myocardial infraction associated transcript 2) in NAFLD remains unclear.

Potassium lignosulfonate as a washing agent for remediating lead and copper co-contaminated soils.

Lignin is a renewable aromatic polymer which is present in large quantities in the cell walls of terrestrial plants and is the main binding agent for fibrous plant components. Potassium lignosulfonate (KLS), as a by-product of pulping processes, can be applied to agricultural fields as a soil conditioner and chelate fertilizer. In this study, based on its solubility and complexing ability, batch washing and column leaching was explored to evaluate the potential application of KLS in the washing remediation of soil contaminated with lead and copper.

Determination of phthalate esters in soil using a quick, easy, cheap, effective, rugged, and safe method followed by GC-MS.

A quick, easy, cheap, effective, rugged, and safe procedure was designed to extract pesticide residues from fruits and vegetables with a high percentage of water. It has not been used extensively for the extraction of phthalate esters from sediments, soils, and sludges. In this work, this procedure was combined with gas chromatography with mass spectrometry to determine 16 selected phthalate esters in soil.

Comparison of sodium hydroxide and calcium hydroxide pretreatments on the enzymatic hydrolysis and lignin recovery of sugarcane bagasse.

Sodium hydroxide (NaOH) and calcium hydroxide (Ca(OH)) respectively dissolved in water and 70% glycerol were applied to treat sugarcane bagasse (SCB) under the condition of 80°C for 2h. NaOH solutions could remove more lignin and obtain higher enzymatic hydrolysis efficiency of SCB than Ca(OH) solutions. Compared with the alkali-water solutions, the enzymatic hydrolysis of SCB treated in NaOH-glycerol solution decreased, while that in Ca(OH)-glycerol solution increased.

Combining Pickering Emulsion Polymerization with Molecular Imprinting to Prepare Polymer Microspheres for Selective Solid-Phase Extraction of Malachite Green.

Malachite green (MG) is currently posing a carcinogenic threat to the safety of human lives; therefore, it is highly desirable to develop an effective method for fast trace detection of MG. Herein, for the first time, this paper presents a systematic study on polymer microspheres, being prepared by combined Pickering emulsion polymerization and molecular imprinting, to detect and purify MG. The microspheres, molecularly imprinted with MG, show enhanced adsorption selectivity to MG, despite a somewhat lowered adsorption capacity, as compared to the counterpart without molecular imprinting.

Improving Visible Light-Absorptivity and Photoelectric Conversion Efficiency of a TiO₂ Nanotube Anode Film by Sensitization with Bi₂O₃ Nanoparticles.

This study presents a novel visible light-active TiO₂ nanotube anode film by sensitization with Bi₂O₃ nanoparticles. The uniform incorporation of Bi₂O₃ contributes to largely enhancing the solar light absorption and photoelectric conversion efficiency of TiO₂ nanotubes. Due to the energy level difference between Bi₂O₃ and TiO₂, the built-in electric field is suggested to be formed in the Bi₂O₃ sensitized TiO₂ hybrid, which effectively separates the photo-generated electron-hole pairs and hence improves the photocatalytic activity.

Beads-on-String Structured Nanofibers for Smart and Reversible Oil/Water Separation with Outstanding Antifouling Property.

It is challenging to explore a unified solution for the treatment of oily wastewater from complex sources. Thus, membrane materials with flexible separation schemes are highly desired. Herein, we fabricated a smart membrane by electrospinning TiO2 doped polyvinylidene fluoride (PVDF) nanofibers.

Graphene oxide-enhanced sol-gel transition sensitivity and drug release performance of an amphiphilic copolymer-based nanocomposite.

We report the fabrication of a highly sensitive amphiphilic copolymer-based nanocomposite incorporating with graphene oxide (GO), which exhibited a low-intensity UV light-triggered sol-gel transition. Non-cytotoxicity was observed for the composite gels after the GO incorporation. Of particular interest were the microchannels that were formed spontaneously within the GO-incorporated UV-gel, which expedited sustained drug release.