Publications by authors named "Huakang Yu"

With the development of laser technology, nonlinear optics plays a crucial role in frequency conversion. However, the generation of second harmonics in nonlinear optical crystals is generally subject to rigorous phase-matching conditions that hinder the performance of broadband tunability. It is believed that introducing disorders in nonlinear optical materials is helpful to overcome this obstacle.

View Article and Find Full Text PDF

The development of novel materials and structures for efficient second-order nonlinear micro/nano devices remains a significant challenge. In this study, the remarkable enhancement of second-harmonic generation (SHG) and cascaded sum frequency generation in whispering gallery mode microspheres made of surface-crystallized glass with a 6-µm BaTiSiO crystal layer are demonstrated. Attributed to the core-shell design, the BaTiSiO located on the surface can be efficiently coupled with whispering gallery modes, resulting in a highly efficient micron-scale cavity-enhanced second-order optical nonlinearity.

View Article and Find Full Text PDF

Efficient mode conversion is crucial for hybrid photonic systems. We present efficient light transition from a standard single-mode fiber (SMF) to a subwavelength-diameter microfiber via a relatively short tapered fiber. Numerical simulations were performed to design the tapered morphology with high transmittance (approximately 86%) for the fundamental modes.

View Article and Find Full Text PDF

We report a femtosecond Kerr-lens mode-locked (KLM) Alexandrite laser resonantly pumped by a 589 nm yellow laser. The 4 nJ pulses as short as 42 fs were obtained corresponding to a peak power of 100 kW. With the repetition rate of 104 MHz, the average power of 420 mW was attained.

View Article and Find Full Text PDF

We demonstrated a compact and power-efficient multi-stage pulsed end-pumped amplifier with stabilized output power of 450 W and near-diffraction-limited beam quality (M < 1.2) at a repetition rate of 1 MHz. The pulsed amplifier produced an exceptional average power and optimal beam quality achieved in laser diode (LD) end-pumped Yb:YAG thin rod configuration at room temperature.

View Article and Find Full Text PDF

We demonstrate a Ti:Sapphire laser generating in excess of 1.2 W in continuous-wave operation when pumped directly with four green laser diodes eliminating the need for a complex pump laser. As a result, improvement of laser efficiency is achieved without sacrificing beam quality.

View Article and Find Full Text PDF

In this work, a facile and versatile strategy for the synthesis of contorted polycyclic aromatic hydrocarbons (PAHs) starting from the functionalized pentacene was established. A series of novel PAHs 1-4 and their derivatives were synthesized through a simple two-step synthesis procedure involving an intramolecular reductive Friedel-Crafts cyclization of four newly synthesized pentacene aldehydes 5-8 as a key step. All the molecules were confirmed by single-crystal X-ray diffraction and their photophysical and electrochemical properties were studied in detail.

View Article and Find Full Text PDF

An optical spectrometer is a basic spectral instrument that probes microscopic physical and chemical properties of macroscopic objects but generally suffers from difficulty in broadband time-resolved measurement. In this work, we report the creation of ultrabroadband white-light laser with a 3-dB bandwidth covering 385 to 1,080 nm, pulse energy of 1.07 mJ, and pulse duration of several hundred femtoseconds by passing 3-mJ pulse energy, 50-fs pulse duration Ti:Sapphire pulse laser through a cascaded fused silica plate and chirped periodically poled lithium niobate crystal.

View Article and Find Full Text PDF

Integrating plasmonic resonance into photonic bandgap nanostructures promises additional control over their optical properties. Here, one-dimensional (1D) plasmonic photonic crystals with angular-dependent structural colors are fabricated by assembling magnetoplasmonic colloidal nanoparticles under an external magnetic field. Unlike conventional 1D photonic crystals, the assembled 1D periodic structures show angular-dependent colors based on the selective activation of optical diffraction and plasmonic scattering.

View Article and Find Full Text PDF

Raman spectra are often masked by strong fluorescence, which severely hinders the applications of Raman spectroscopy. Herein, for the first time, we report ionic-wind-enhanced Raman spectroscopy (IWERS) incorporated with photobleaching (PB) as a noninvasive approach to detect fluorescent and vulnerable samples without a substrate. In this study, ionic wind (IW) generated by needle-net electrodes transfers charges to the sample surface in air on the scale of millimeters rather than nanometers in surface-enhanced Raman spectroscopy.

View Article and Find Full Text PDF

3,6-Carbazole precursors were used to prepare an octaphyrin. The conformation and electronic structure of the system could be modulated through trifluoroacetate (TFA) protonation and BF complexation. The resulting nonaromatic macrocyclic complexes, and , displayed noteworthy photophysical properties.

View Article and Find Full Text PDF

Nanocrystal-in-glass (NIG) is an exciting class of composites, because it can not only combine the advantages of crystal and glass materials but also potentially generate new physical phenomenon in a cooperative manner. Herein, the nonlinear light-matter interaction processes in a broad range of NIG composites homogeneously embedded with LiNbO are investigated. It is shown that, by rational control of the organization manner of crystal and glass phases, second-harmonic generation (SHG) can be precisely tuned.

View Article and Find Full Text PDF

Chemically synthesized metal nanowires are promising building blocks for next-generation photonic integrated circuits, but technological implementation in monolithic integration will be severely hampered by the lack of controllable and precise manipulation approaches, due to the strong adhesion of nanowires to substrates in non-liquid environments. Here, we demonstrate this obstacle can be removed by our proposed earthworm-like peristaltic crawling motion mechanism, based on the synergistic expansion, friction, and contraction in plasmon-driven metal nanowires in non-liquid environments. The evanescently excited surface plasmon greatly enhances the heating effect in metal nanowires, thereby generating surface acoustic waves to drive the nanowires crawling along silica microfibres.

View Article and Find Full Text PDF

A cyano-substituted styrene derivative is synthesized and successfully prepared to lamellate single crystals through precisely controlling the crystal growth conditions. The lamellate single crystals with regular edge and smooth surface display intrinsically ordered stacking and high quality, all of which are of importance for high optoelectronic performance. The single-component light-emitting transistors based on the lamellate crystals offer striking device performance in terms of record external quantum efficiency of 2.

View Article and Find Full Text PDF

Further development of high-efficiency and low-cost organic fluorescent materials is intrinsically hampered by the energy gap law and spin statistics, especially in the near-infrared (NIR) region. Here we design a novel building block with aggregation-induced emission (AIE) activity for realizing highly efficient luminophores covering the deep-red and NIR region, which originates from an increase in the orbital overlap and electron-withdrawing ability. An organic donor-acceptor molecule () with the building block is prepared and can readily form J-type molecular columns with multiple C-H⋯N/O interactions.

View Article and Find Full Text PDF

Organic microlasers have attracted much attention due to their unique features such as high mechanical flexibility, facile doping of gain materials, high optical quality, simplicity and low-cost fabrication. However, organic gain materials usually suffer from aggregation-caused quenching (ACQ), preventing further advances of organic microlasers. Here, a new type of microlaser from aggregation-induced emission (AIE) material is successfully demonstrated.

View Article and Find Full Text PDF

Instantaneous control over the orientation of anisotropically shaped plasmonic nanostructures allows for selective excitation of plasmon modes and enables dynamic tuning of the plasmonic properties. Herein we report the synthesis of rod-shaped magnetic/plasmonic core-shell nanocomposite particles and demonstrate the active tuning of their optical property by manipulating their orientation using an external magnetic field. We further design and construct an IR-photoelectric coupling system, which generates an output voltage depending on the extinction property of the measured nanocomposite sample.

View Article and Find Full Text PDF

It is highly desirable to design optical devices with diverse optomechanical functions. Here, we investigate lateral optical force exerted on subwavelength-diameter (SD) optical fibers harnessed by input light modes with different polarizations. It is interesting to find that input light modes of circular or elliptical polarizations would bring about lateral optical force in new directions, which has not been observed in previous studies.

View Article and Find Full Text PDF

We investigate transverse optical forces exerted on the endface of subwavelength-diameter (SD) optical fiber by using a finite-difference time-domain (FDTD) method. Detailed spatial distributions of transverse optical force along the fiber axis can now be accessible, based on which the dependence of transverse optical force on transverse cross sections, oblique-cut endfaces and high-order mode are carefully studied. Our numerical results demonstrate that either asymmetric cross section or oblique-cut endface would dominantly contribute to the transverse optical force and the corresponding sideways deflection of SD fiber, which is in good agreement with previous experimental observations.

View Article and Find Full Text PDF

Organometal halide perovskite has recently emerged as a very promising family of materials with augmented performance in electronic and optoelectronic applications including photovoltaic devices, photodetectors, and light-emitting diodes. Herein, we propose and demonstrate facile solution synthesis of a series of colloidal organometal halide perovskite CH3NH3PbX3 (X = halides) nanoparticles with amorphous structure, which exhibit high quantum yield and tunable emission from ultraviolet to near-infrared. The growth mechanism and photoluminescence properties of the perovskite amorphous nanoparticles were studied in detail.

View Article and Find Full Text PDF

Controlling nonlinear light-matter interaction is important from a fundamental science point of view as well as a basis for future optoelectronic devices. Recent advances in two-dimensional crystals have created opportunities to manipulate nonlinear processes electrically. Here we report a strong second-harmonic generation (SHG) in a 2D WSe2 bilayer crystal caused by a back gate field.

View Article and Find Full Text PDF

Integration of miniaturized elements has been a major driving force behind modern photonics. Nanowires have emerged as potential building blocks for compact photonic circuits and devices in nanophotonics. We demonstrate here a single nanowire optical correlator (SNOC) for ultrafast pulse characterization based on imaging of the second harmonic (SH) generated from a cadmium sulfide (CdS) nanowire by counterpropagating guided pulses.

View Article and Find Full Text PDF

Multicolour lasing with wavelength varying from 578 nm to 640 nm is realized from a single bandgap-graded CdSSe alloy nanoribbon, by selecting the excited spot at room temperature. Though reabsorption is a serious problem to achieve lasing at short wavelength, multiple scatters on the nanoribbon form localized cavities, and thus lasing at different wavelengths is realized. By increasing the excitation area, multicolour lasing from the same nanoribbon is also observed simultaneously.

View Article and Find Full Text PDF

We report the first observation of supercontinuum (SC) generation in single semiconductor nanoribbons (NRs). By launching a continuous wave (CW) 532-nm pump light along a 200-μm-length CdS NR for waveguiding excitation, SC generation is realized with a threshold down to sub-milliwatt level, which is ~3 orders lower compared with previous CW-pumped SC generated in glass fibers. The low threshold is benefitted from the favorable material properties and waveguide geometries including high Raman gains, strong light confinement, more optical guided modes and phonon modes.

View Article and Find Full Text PDF

We report a microfibre absorption sensor by using a 900 nm diameter silica microfibre embedded in a 125 μm wide microchannel with a detection length of 2.5 cm. Investigated by measuring the absorbance of methylene blue (MB), the sensor shows a detection limit down to 50 pM with excellent reversibility in a concentration range of 0-5 nM.

View Article and Find Full Text PDF