Epsilon-near-zero thin films in a dual-functional system for thermal infrared camouflage and thermal management within the atmospheric window.

Thermal infrared camouflage aims to reduce the detectability of a target using thermal imaging devices. Given the typically high thermal emissivity in everyday environments, the thermal emissivity of the background environment must be considered. The conventional low-emissivity strategy for thermal camouflage is only effective for targets at extremely high temperatures (>350 °C), making it unsuitable for applications near room-to-medium-high temperature range (<350 °C).

Characterization of 2D Transition Metal Dichalcogenides Through Anisotropic Exciton Behaviors.

This study reports the first attempt to characterize the quality, defects, and strain of as-grown monolayer transition metal dichalcogenide (TMDC)-based 2D materials through exciton anisotropy. A standard ellipsometric parameter (Ψ) to observe anisotropic exciton behavior in monolayer 2D materials is used. According to the strong exciton effect from phonon-electron coupling processes, the change in the exciton in the Van Hove singularity is sensitive to lattice distortions such as defects and strain.

Cavity-enhanced magnetic dipole resonance induced hot luminescence from hundred-nanometer-sized silicon spheres.

In this paper, we demonstrate the first example of phonon-assisted hot luminescence (PAHL) emission from silicon (Si) spheres (diameter > 100nm) without using the plasmonic effect or quantum confinement effect. Instead, we excite the hot luminescence of Si by a strong thin-film-cavity-enhanced magnetic dipole resonance. The thin-film cavity (80 nm SiO/Ag) shows a strong co-enhancement with the magnetic dipole resonance of Si sphere (diameter = 120 nm).

Wafer-scale nanocracks enable single-molecule detection and on-site analysis.

Large-area surface-enhanced Raman spectroscopy (SERS) sensing platforms displaying ultrahigh sensitivity and signal uniformity have potentially enormous sensing applicability, but they are still challenging to prepare in a scalable manner. In this study, silver nanopaste (AgNPA) was employed to prepare a wafer-scale, ultrasensitive SERS substrate. The self-generated, high-density Ag nanocracks (NCKs) with small gaps could be created on Si wafers via a spin-coating process, and provided extremely abundant hotspots for SERS analyses with ultrahigh sensitivity-down to the level of single molecules (enhancement factor: ca.

Optical Inspection of 2D Materials: From Mechanical Exfoliation to Wafer-Scale Growth and Beyond.

Optical inspection is a rapid and non-destructive method for characterizing the properties of two-dimensional (2D) materials. With the aid of optical inspection, in situ and scalable monitoring of the properties of 2D materials can be implemented industrially to advance the development and progress of 2D material-based devices toward mass production. This review discusses the optical inspection techniques that are available to characterize various 2D materials, including graphene, transition metal dichalcogenides (TMDCs), hexagonal boron nitride (h-BN), group-III monochalcogenides, black phosphorus (BP), and group-IV monochalcogenides.

Diverse Substrate-Mediated Local Electric Field Enhancement of Metal Nanoparticles for Nanogap-Enhanced Raman Scattering.

The localized surface plasmon resonance of plasmonic nanoparticles (NPs) can be coupled with a noble metal substrate (S) to induce a localized augmented electric field (E-field) concentrated at the NP-S gap. Herein, we analyzed the fundamental near-field properties of metal NPs on diverse substrates numerically (using the 3D finite-difference time-domain method) and experimentally [using surface-enhanced Raman scattering (SERS)]. We systematically examined the effects of plasmonic NPs on noble metals (Ag and Au), non-noble metals (Al, Ti, Cu, Fe, and Ni), semiconductors (Si and Ge), and dielectrics (TiO, ZnO, and SiO) as substrates.

Silicon-Based Embedded Trenches of Active Antennas for High-Responsivity Omnidirectional Photodetection at Telecommunication Wavelengths.

Although the use of plasmonic nanostructures for photodetection below the band gap energy of the semiconductor has been intensively investigated recently, efficiencies of such hot electron-based devices have, unfortunately, remained low because of the inevitable energy loss of the hot electrons as they move and transfer in active antennas based on metallic nanostructures. In this work, we demonstrate the concept of high-refractive-index material-embedded trench-like (ETL) active antennas that could be used to achieve almost 100% absorbance within the ultrashallow region (approximately 10 nm) beneath the metal-semiconductor interface, which is a much smaller distance compared with the hot electrons' mean free path in the noble metal layer. Taking advantage of these ETL-based active antennas, we obtained photoresponsivities under zero bias at wavelengths of 1310 and 1550 nm of 5854 and 693 nA mW, respectively-values higher than most those previously reported for active antenna-based silicon (Si) photodetectors that operate at optical telecommunication wavelengths.

Manipulating the distribution of electric field intensity to effectively enhance the spatial and spectral fluorescence intensity of fluorescent nanodiamonds.

Fluorescent nanodiamonds (FNDs) having nitrogen-vacancy (NV) centers have drawn much attention for their biocompatibility and stable optical properties. Nevertheless, the NV centers are located in the interior of the FNDs, and it has not been possible to increase the fluorescence intensity of FNDs efficiently using previously developed enhancement methods. In this paper, we present a simple nanocavity structure that enhances the fluorescence intensity of FNDs.

Enhancing Raman signals through electromagnetic hot zones induced by magnetic dipole resonance of metal-free nanoparticles.

In this study, we found that the large area of electromagnetic field hot zone induced through magnetic dipole resonance of metal-free structures can greatly enhance Raman scattering signals. The magnetic resonant nanocavities, based on high-refractive-index silicon nanoparticles (SiNPs), were designed to resonate at the wavelength of the excitation laser of the Raman system. The well-dispersed SiNPs that were not closely packed displayed significant magnetic dipole resonance and gave a Raman enhancement per unit volume of 59 347.

Filter-free, junctionless structures for color sensing.

A simple structure, efficient color splitting, sufficient output of electrical signals, and low power consumption are the important characteristics of contemporary devices for color sensing. In this study, we developed filter-free, junctionless structures that exhibited a superior photo-thermo-electrical response under a low bias voltage and a short response time in milliseconds. Although our compact sensor had a simple single-layer trench-like aluminum (Al) structure, it could perform multiple functions, including light harvesting, color-selective absorption, photo-thermo-electrical transformation, and the ability to collect photoinduced differences in electrical signals.

Plasmonics-Based Multifunctional Electrodes for Low-Power-Consumption Compact Color-Image Sensors.

High pixel density, efficient color splitting, a compact structure, superior quantum efficiency, and low power consumption are all important features for contemporary color-image sensors. In this study, we developed a surface plasmonics-based color-image sensor displaying a high photoelectric response, a microlens-free structure, and a zero-bias working voltage. Our compact sensor comprised only (i) a multifunctional electrode based on a single-layer structured aluminum (Al) film and (ii) an underlying silicon (Si) substrate.

Short-range plasmonic nanofocusing within submicron regimes facilitates in situ probing and promoting of interfacial reactions.

In this study, a simple configuration, based on high-index dielectric nanoparticles (NPs) and plasmonic nanostructures, is employed for the nanofocusing of submicron-short-range surface plasmon polaritons (SPPs). The excited SPPs are locally bound and focused at the interface between the dielectric NPs and the underlying metallic nanostructures, thereby greatly enhancing the local electromagnetic field. Taking advantage of the surface properties of the dielectric NPs, this system performs various functions.

Astronomical liquid mirrors as highly ultrasensitive, broadband-operational surface-enhanced Raman scattering-active substrates.

In this study, we found that an astronomical liquid mirror can be prepared as a highly ultrasensitive, low-cost, highly reproducible, broadband-operational surface-enhanced Raman scattering (SERS)-active substrate. Astronomical liquid mirrors are highly specularly reflective because of their perfectly dense-packed silver nanoparticles; they possess a large number and high density of hot spots that experience a very high intensity electric field, resulting in excellent SERS performance. When using the liquid mirror-based SERS-active substrate to detect 4-aminothiophenol (4-ATP), we obtained measured analytical enhancement factors (AEFs) of up to 2.

White-Light-Induced Collective Heating of Gold Nanocomposite/Bombyx mori Silk Thin Films with Ultrahigh Broadband Absorbance.

This paper describes a systematic investigation of the phenomenon of white-light-induced heating in silk fibroin films embedded with gold nanoparticles (Au NPs). The Au NPs functioned to develop an ultrahigh broadband absorber, allowing white light to be used as a source for photothermal generation. With an increase of the Au content in the composite films, the absorbance was enhanced significantly around the localized surface plasmon resonance (LSPR) wavelength, while non-LSPR wavelengths were also increased dramatically.

Using nanoimprint lithography to improve the light extraction efficiency and color rendering of dichromatic white light-emitting diodes.

Despite the efficiency of gallium nitride (GaN)-based blue light-emitting diodes (LEDs), the light extraction arising from the packaging of the phosphor remains an important issue when enhancing the performance of dichromatic white LEDs. In this study, we employed a simple, inexpensive nanoimprinting process to increase both the light extraction efficiency and color rendering of dichromatic white LEDs. We employed the rigorous coupled wave approach (RCWA) to optimize the light extraction efficiency of yellow and blue light.

Romantic Story or Raman Scattering? Rose Petals as Ecofriendly, Low-Cost Substrates for Ultrasensitive Surface-Enhanced Raman Scattering.

In this Article, we present a facile approach for the preparation of ecofriendly substrates, based on common rose petals, for ultrasensitive surface-enhanced Raman scattering (SERS). The hydrophobic concentrating effect of the rose petals allows us to concentrate metal nanoparticle (NP) aggregates and analytes onto their surfaces. From a systematic investigation of the SERS performance when using upper and lower epidermises as substrates, we find that the lower epidermis, with its quasi-three-dimensional (quasi-3D) nanofold structure, is the superior biotemplate for SERS applications.

Transparent, broadband, flexible, and bifacial-operable photodetectors containing a large-area graphene-gold oxide heterojunction.

In this study, we combine graphene with gold oxide (AuOx), a transparent and high-work-function electrode material, to achieve a high-efficient, low-bias, large-area, flexible, transparent, broadband, and bifacial-operable photodetector. The photodetector operates through hot electrons being generated in the graphene and charge separation occurring at the AuOx-graphene heterojunction. The large-area graphene covering the AuOx electrode efficiently prevented reduction of its surface; it also acted as a square-centimeter-scale active area for light harvesting and photodetection.

Incident angle-tuned, broadband, ultrahigh-sensitivity plasmonic antennas prepared from nanoparticles on imprinted mirrors.

We have used a direct imprint-in-metal method that is cheap and rapid to prepare incident angle-tuned, broadband, ultrahigh-sensitivity plasmonic antennas from nanoparticles (NPs) and imprinted metal mirrors. By changing the angle of incidence, the nanoparticle-imprinted mirror antennas (NIMAs) exhibited broadband electromagnetic enhancement from the visible to the near-infrared (NIR) regime, making them suitable for use as surface-enhanced Raman scattering (SERS)-active substrates. Unlike other SERS-active substrates that feature various structures with different periods or morphologies, the NIMAs achieved broadband electromagnetic enhancement from single configurations.

Nanocrystallized CdS beneath the surface of a photoconductor for detection of UV light with picowatt sensitivity.

In this study, we demonstrated that the improvement of detection capability of cadmium sulfide (CdS) photoconductors in the ultraviolet (UV) regime is much larger than that in the visible regime, suggesting that the deep UV laser-treated CdS devices are very suitable for low-light detection in the UV regime. We determined that a nanocrystallized CdS photoconductor can behave as a picowatt-sensitive detector in the UV regime after ultra-shallow-region crystallization of the CdS film upon a single shot from a KrF laser. Photoluminescence and Raman spectra revealed that laser treatment increased the degree of crystallization of the CdS and led to the effective removal of defects in the region of a few tens nanometers beneath the surface of CdS, confirming the result by the transmission electron microscopy (TEM) images.

Single-shot laser treatment provides quasi-three-dimensional paper-based substrates for SERS with attomolar sensitivity.

In this study, an eco-friendly and ultrasensitive paper substrate is developed for surface-enhanced Raman scattering (SERS) with performance approaching single molecule detection. By exploiting the laser-induced photothermal effect, paper fibrils with hybrid micro- and nanostructures can facilitate the formation of highly dense metal nanoparticles (NPs) after a single shot of laser illumination. Metal films deposited on the paper substrates feature discontinuous morphologies, with the fragments acting as multiple nucleation sites.

Plasmonic nanoparticle-film calipers for rapid and ultrasensitive dimensional and refractometric detection.

In this study, we develop an ultrasensitive nanoparticle (NP)-film caliper that functions with high resolution (angstrom scale) in response to both the dimensions and refractive index of the spacer sandwiched between the NPs and the film. The anisotropy of the plasmonic gap mode in the NP-film caliper can be characterized readily using spectroscopic ellipsometry (SE) without the need for further optical modeling. To the best of our knowledge, this paper is the first to report the use of SE to study the plasmonic gap modes in NP-film calipers and to demonstrate that SE is a robust and convenient method for analyzing NP-film calipers.

Nondestructive characterization of the structural quality and thickness of large-area graphene on various substrates.

We demonstrate an inspection technique, based on only one ellipsometric parameter, Ψ, of spectroscopic ellipsometry (SE), for the rapid, simultaneous identification of both the structural quality and thicknesses of large-area graphene films. The measured Ψ spectra are strongly affected by changes in the out-of-plane absorption coefficients (αTM); they are also correlated to the ratio of the intensities of the D and G bands in Raman spectra of graphene films. In addition, the electronic transition state of graphene within the UV regime assists the characterization of the structural quality.

Highly reflective liquid mirrors: exploring the effects of localized surface plasmon resonance and the arrangement of nanoparticles on metal liquid-like films.

In this paper, we describe a high-reflectance liquid mirror prepared from densely packed silver nanoparticles (AgNPs) of two different sizes. We controlled the particle size during the synthetic process by controlling the temperature. Varying the concentration of the ligand also allowed us to optimize the arrangement of the AgNPs to achieve liquid mirrors exhibiting high specular reflectance.

Silicon-based broadband antenna for high responsivity and polarization-insensitive photodetection at telecommunication wavelengths.

Although the concept of using local surface plasmon resonance based nanoantenna for photodetection well below the semiconductor band edge has been demonstrated previously, the nature of local surface plasmon resonance based devices cannot meet many requirements of photodetection applications. Here we propose the concept of deep-trench/thin-metal (DTTM) active antenna that take advantage of surface plasmon resonance phenomena, three-dimensional cavity effects, and large-area metal/semiconductor junctions to effectively generate and collect hot electrons arising from plasmon decay and, thereby, increase photocurrent. The DTTM-based devices exhibited superior photoelectron conversion ability and high degrees of detection linearity under infrared light of both low and high intensity.