A facile approach to the scalable preparation of thermoplastic/carbon nanotube composites.

Disentangling and dispersing multiwalled carbon nanotubes (MWCNTs) in thermoplastics by the existing melt compounding facilities where neither solvent nor liquid chemicals are allowed remains a great challenge. This challenge is addressed herein by combining ball milling with melt compounding. Specifically, ball milling is applied to disentangle MWCNTs and to eventually liberate each tube from agglomeration, and then the tubes are melt compounded with SSFs (PA6).

Graphene platelets versus phosphorus compounds for elastomeric composites: flame retardancy, mechanical performance and mechanisms.

Polymers are widely used but their flammability remains a serious issue causing fatalities and property damage. Herein we present an investigation into the effectiveness of graphene platelets (GnPs) to simultaneously improve the flame retardancy and mechanical properties of ethylene propylene diene monomer rubber (EPDM). EPDM was melt compounded respectively with GnPs and a commercial flame retardant (ammonium polyphosphate, APP) to produce two groups of composites.

Improving Thermal Stability of Polyurethane through the Addition of Hyperbranched Polysiloxane.

Polydimethylsiloxane with hydroxy groups was functionalized to form functionalized polydimethylsiloxane, which subsequently underwent an addition reaction with isophorone diisocyanate to form the prepolymer. Next, 3-aminopropyltriethoxysilane (APTS) reacted with 3-glycidoxypropyltrimethoxysilane (GPTS) to produce bridged polysilsesquioxanes, and sol-gel technology was employed to form hyperbranched polysiloxane nanoparticles with hydroxy groups, APTS-GPTS, which was used as the additive. The hyperbranched polysiloxane and the prepolymer containing NCO functional groups then underwent an addition reaction to produce the hybrid materials.

Preparation and Flame Retardance of Polyurethane Composites Containing Microencapsulated Melamine Polyphosphate.

A new microencapsulated flame retardant containing melamine polyphosphate (MPP) and 4,4'-oxydianiline-formaldehyde (OF) resin as the core and shell materials, respectively, was synthesized by in situ polymerization. Si NMR was used to measure the condensation density of polyurethane containing silicon compound (Si-PU). The structures and properties of the microencapsulated melamine polyphosphate (OFMPP) were characterized using X-ray photoelectron spectroscopy, scanning electron microscopy and water solubility.

PEDOT-based composites as electrode materials for supercapacitors.

Poly (3, 4-ethylenedioxythiophene) (denoted PEDOT) already has a brief history of being used as an active material in supercapacitors. It has many advantages such as low-cost, flexibility, and good electrical conductivity and pseudocapacitance. However, the major drawback is low stability, which means an obvious capacitance drop after a certain number of charge-discharge cycles.

Facile Fabrication of Graphene Membranes with Readily Tunable Structures.

Advanced membranes that combine mechanical robustness with fast permeation are crucial to many applications such as water purification, ions selectivity, and gas separation. Graphene sheets offer a promising opportunity to fabricate thin, high-flux, and pressure-endurable membranes because of their unique 2D morphology, oxidizable surface, and electrical conductivity. We herein report a highly effective yet simple approach to the fabrication of graphene membranes featuring controllable oxidation degrees and thus tunable structures and properties.

Processable 3-nm thick graphene platelets of high electrical conductivity and their epoxy composites.

Graphene platelets (GnPs) are a class of novel 2D nanomaterials owing to their very small thickness (∼3 nm), high mechanical strength and electric conductivity (1460 S cm(-1)), and good compatibility with most polymers as well as cost-effectiveness. In this paper we present a low-cost processing technique for producing modified GnPs and an investigation of the electrical and mechanical properties of the resulting composites. After dispersing GnPs in solvent N-methyl-2-pyrrolidone, a long-chain surfactant (Jeffamine D 2000, denoted J2000) was added to covalently modify GnPs, yielding J2000-GnPs.

Melt compounding with graphene to develop functional, high-performance elastomers.

Rather than using graphene oxide, which is limited by a high defect concentration and cost due to oxidation and reduction, we adopted cost-effective, 3.56 nm thick graphene platelets (GnPs) of high structural integrity to melt compound with an elastomer-ethylene-propylene-diene monomer rubber (EPDM)-using an industrial facility. An elastomer is an amorphous, chemically crosslinked polymer generally having rather low modulus and fracture strength but high fracture strain in comparison with other materials; and upon removal of loading, it is able to return to its original geometry, immediately and completely.

From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites.

In spite of extensive studies conducted on carbon nanotubes and silicate layers for their polymer-based nanocomposites, the rise of graphene now provides a more promising candidate due to its exceptionally high mechanical performance and electrical and thermal conductivities. The present study developed a facile approach to fabricate epoxy-graphene nanocomposites by thermally expanding a commercial product followed by ultrasonication and solution-compounding with epoxy, and investigated their morphologies, mechanical properties, electrical conductivity and thermal mechanical behaviour. Graphene platelets (GnPs) of 3.