Enabling High-Performance Hybrid Solid-State Batteries by Improving the Microstructure of Free-Standing LATP/LFP Composite Cathodes.

The phosphate lithium-ion conductor LiAlTi(PO) (LATP) is an economically attractive solid electrolyte for the fabrication of safe and robust solid-state batteries, but high sintering temperatures pose a material engineering challenge for the fabrication of cell components. In particular, the high surface roughness of composite cathodes resulting from enhanced crystal growth is detrimental to their integration into cells with practical energy density. In this work, we demonstrate that efficient free-standing ceramic cathodes of LATP and LiFePO (LFP) can be produced by using a scalable tape casting process.

Elucidating the mechanism of photocatalytic reduction of bicarbonate (aqueous CO) into formate and other organics.

The photocatalytic reduction of CO under solar irradiation is an ideal approach to mitigating global warming, and reducing aqueous forms of CO that interact strongly with a catalyst (e.g., HCO) is a promising strategy to expedite such reductions.

Biocompatible hole scavenger-assisted graphene oxide dots for photodynamic cancer therapy.

Photodynamic therapy (PDT) receives scholarly attention for its low invasiveness and mild adverse effects. Among the reactive oxygen species for PDT, H2O2 is advantageous for achieving long life and low cytotoxicity. Nitrogen-doped graphene oxide dots (NGODs), which are small (∼4.

Nanomedicine-Based Strategies Assisting Photodynamic Therapy for Hypoxic Tumors: State-of-the-Art Approaches and Emerging Trends.

Since the first clinical cancer treatment in 1978, photodynamic therapy (PDT) technologies have been largely improved and approved for clinical usage in various cancers. Due to the oxygen-dependent nature, the application of PDT is still limited by hypoxia in tumor tissues. Thus, the development of effective strategies for manipulating hypoxia and improving the effectiveness of PDT is one of the most important area in PDT field.

Mesophase Pitch-Derived Carbons with High Electronic and Ionic Conductivity Levels for Electric Double-Layer Capacitors.

We develop a temperature-programmed pretreatment strategy for converting aliphatic-rich petroleum pitch into a mesophase framework, which can then be activated using KOH to produce high-performance carbons for electric double-layer capacitors (EDLCs). In the pretreatment of pitch at an optimal temperature, both the temperature ramp and holding time influence the mesophase structure, which governs the pore structure and crystallinity of the resulting activated carbon. High carbon microporosity is beneficial to capacitance maximization but detrimental to ion transport.

High-Efficiency Bifacial Dye-Sensitized Solar Cells for Application under Indoor Light Conditions.

High-efficiency, stable bifacial dye-sensitized solar cells (DSSCs) are prepared for application under indoor light conditions. A 3-methoxypropionitrile solvent and cobalt redox couples are utilized to prepare the electrolytes. To obtain the best cell performance, the components of the DSSCs, including electrolytes, photoanodes, and counter electrodes (CEs), are regulated.

Liquid Type Nontoxic Photoluminescent Nanomaterials for High Color Quality White-Light-Emitting Diode.

High-brightness white-light-emitting diodes (w-LEDs) with excellent color quality is demonstrated by using nontoxic nanomaterials. Previously, we have reported the high color quality w-LEDs with heavy-metal phosphor and quantum dots (QDs), which may cause environmental hazards. In the present work, liquid-type white LEDs composed of nontoxic materials, named as graphene and porous silicon quantum dots are fabricated with a high color rendering index (CRI) value gain up to 95.

Electronic structure manipulation of graphene dots for effective hydrogen evolution from photocatalytic water decomposition.

This paper presents a heteroatom doping strategy to manipulate the structure of graphene-based photocatalysts for effective hydrogen production from aqueous solution. Oxygenation of graphene creates a bandgap to produce semiconducting graphene oxide, nitrogen doping extends the resonant π-conjugation to prolong the charge lifetime, and sulfur doping breaks the electron neutrality to facilitate charge transfer. Accordingly, ammonia-treated sulfur-nitrogen-co-doped graphene oxide dots (A-SNGODs) are synthesized by annealing graphene oxide sheets in sulfur-ammonia, oxidizing the sheets into dots, and then hydrothermally treating the dots in ammonia.

Graphene Oxide Sponge as Nanofillers in Printable Electrolytes in High-Performance Quasi-Solid-State Dye-Sensitized Solar Cells.

A graphene oxide sponge (GOS) is utilized for the first time as a nanofiller (NF) in printable electrolytes (PEs) based on poly(ethylene oxide) and poly(vinylidene fluoride) for quasi-solid-state dye-sensitized solar cells (QS-DSSCs). The effects of the various concentrations of GOS NFs on the ion diffusivity and conductivity of electrolytes and the performance of the QS-DSSCs are studied. The results show that the presence of GOS NFs significantly increases the diffusivity and conductivity of the PEs.

Minimization of Ion-Solvent Clusters in Gel Electrolytes Containing Graphene Oxide Quantum Dots for Lithium-Ion Batteries.

This study uses graphene oxide quantum dots (GOQDs) to enhance the Li -ion mobility of a gel polymer electrolyte (GPE) for lithium-ion batteries (LIBs). The GPE comprises a framework of poly(acrylonitrile-co-vinylacetate) blended with poly(methyl methacrylate) and a salt LiPF solvated in carbonate solvents. The GOQDs, which function as acceptors, are small (3-11 nm) and well dispersed in the polymer framework.

Three-dimensional patterned graphene oxide-quantum dot microstructures via two-photon crosslinking.

The two-photon crosslinking of graphene oxide-quantum dots (GOQDs) adopts rose Bengal as the photoactivator to induce the GOQD assembly process. Based on the Förster resonance energy transfer mechanism with oxygen as the crosslinking medium, three-dimensional patterned GOQD microstructures with near diffraction-limit spatial resolution have been fabricated and analyzed by a multiphoton excited fabrication instrument/microscope.

Roles of nitrogen functionalities in enhancing the excitation-independent green-color photoluminescence of graphene oxide dots.

Fluorescent graphene oxide dots (GODs) are environmentally friendly and biocompatible materials for photoluminescence (PL) applications. In this study, we employed annealing and hydrothermal ammonia treatments at 500 and 140 °C, respectively, to introduce nitrogen functionalities into GODs for enhancing their green-color PL emissions. The hydrothermal treatment preferentially produces pyridinic and amino groups, whereas the annealing treatment produces pyrrolic and amide groups.

Approaching Defect-free Amorphous Silicon Nitride by Plasma-assisted Atomic Beam Deposition for High Performance Gate Dielectric.

In the past few decades, gate insulators with a high dielectric constant (high-k dielectric) enabling a physically thick but dielectrically thin insulating layer, have been used to replace traditional SiOx insulator and to ensure continuous downscaling of Si-based transistor technology. However, due to the non-silicon derivative natures of the high-k metal oxides, transport properties in these dielectrics are still limited by various structural defects on the hetero-interfaces and inside the dielectrics. Here, we show that another insulating silicon compound, amorphous silicon nitride (a-Si3N4), is a promising candidate of effective electrical insulator for use as a high-k dielectric.

Immobilization of Anions on Polymer Matrices for Gel Electrolytes with High Conductivity and Stability in Lithium Ion Batteries.

Unlabelled: This study reports on a high ionic-conductivity gel polymer electrolyte (GPE), which is supported by a TiO2 nanoparticle-decorated polymer framework comprising poly(acrylonitrile-co-vinyl acetate) blended with poly(methyl methacrylate), i.e. , PAVM: TiO2.

Elucidating Quantum Confinement in Graphene Oxide Dots Based On Excitation-Wavelength-Independent Photoluminescence.

Investigating quantum confinement in graphene under ambient conditions remains a challenge. In this study, we present graphene oxide quantum dots (GOQDs) that show excitation-wavelength-independent photoluminescence. The luminescence color varies from orange-red to blue as the GOQD size is reduced from 8 to 1 nm.

Thermal conductivity from hierarchical heat sinks using carbon nanotubes and graphene nanosheets.

The in-plane (kip) and through-plane (ktp) thermal conductivities of heat sinks using carbon nanotubes (CNTs), graphene nanosheets (GNs), and CNT/GN composites are extracted from two experimental setups within the 323-373 K temperature range. Hierarchical three-dimensional CNT/GN frameworks display higher kip and ktp values, as compared to the CNT- and GN-based heat sinks. The kip and ktp values of the CNT/GN-based heat sink reach as high as 1991 and 76 W m(-1) K(-1) at 323 K, respectively.

Design of poly(acrylonitrile)-based gel electrolytes for high-performance lithium ion batteries.

The use of polyacrylonitrile (PAN) as a host for gel polymer electrolytes (GPEs) commonly produces a strong dipole-dipole interaction with the polymer. This study presents a strategy for the application of PAN in GPEs for the production of high performance lithium ion batteries. The resulting gel electrolyte GPE-AVM comprises a poly(acrylonitrile-co-vinyl acetate) copolymer blending poly(methyl methacrylate) as a host, which is swelled using a liquid electrolyte (LE) of 1 M LiPF6 in carbonate solvent.

Performance enhancement of quantum-dot-sensitized solar cells by potential-induced ionic layer adsorption and reaction.

Successive ionic layer adsorption and reaction (SILAR) technique has been commonly adopted to fabricate quantum-dot-sensitized solar cells (QDSSCs) in the literature. However, pore blocking and poor distribution of quantum dots (QDs) in TiO2 matrices were always encountered. Herein, we report an efficient method, termed as potential-induced ionic layer adsorption and reaction (PILAR), for in situ synthesizing and assembling CdSe QDs into mesoporous TiO2 films.

Graphene oxide-based micropatterns via high-throughput multiphoton-induced reduction and ablation.

In this study, a developed temporal focusing-based femtosecond laser system provides high-throughput multiphoton-induced reduction and ablation of graphene oxide (GO) films. Integrated with a digital micromirror device to locally control the laser pulse numbers, GO-based micropatterns can be quickly achieved instantly. Furthermore, the degree of reduction and ablation can be precisely adjusted via controlling the laser wavelength, power, and pulse number.

Nitrogen-doped graphene oxide quantum dots as photocatalysts for overall water-splitting under visible light illumination.

Nitrogen-doped graphene oxide quantum dots exhibit both p- and n-type conductivities and catalyze overall water-splitting under visible-light irradiation. The quantum dots contain p-n type photochemical diodes, in which the carbon sp(2) clusters serve as the interfacial junction. The active sites for H2 and O2 evolution are the p- and n-domains, respectively, and the reaction mimics biological photosynthesis.

Electron transport dynamics in TiO(2) films deposited on ti foils for back-illuminated dye-sensitized solar cells.

In this study, we examine the electron transport dynamics in TiO2 films of back-illuminated dye-sensitized solar cells. The TiO2 films are fabricated using electrophoretic deposition (EPD) and the conventional paste-coating (PC) of TiO2 nanoparticles on Ti-foil substrates. Intensity-modulated photocurrent spectroscopy reveals that red-light irradiation is more efficient than blue-light irradiation for generating photocurrents for back-illuminated cells.

Poly(ethylene oxide)-co-poly(propylene oxide)-based gel electrolyte with high ionic conductivity and mechanical integrity for lithium-ion batteries.

Using gel polymer electrolytes (GPEs) for lithium-ion batteries usually encounters the drawback of poor mechanical integrity of the GPEs. This study demonstrates the outstanding performance of a GPE consisting of a commercial membrane (Celgard) incorporated with a poly(ethylene oxide)-co-poly(propylene oxide) copolymer (P(EO-co-PO)) swelled by a liquid electrolyte (LE) of 1 M LiPF6 in carbonate solvents. The proposed GPE stably holds LE with an amount that is three times that of the Celgard-P(EO-co-PO) composite.

Highly efficient gel-state dye-sensitized solar cells prepared using poly(acrylonitrile-co-vinyl acetate) based polymer electrolytes.

Poly(acrylonitrile-co-vinyl acetate) (PAN-VA) is utilized as a gelation agent to prepare gel-state electrolytes for dye-sensitized solar cell (DSSC) applications. Based on the synergistic effect of PAN-VA and TiO(2) fillers in the electrolyte, the gel-state DSSC can achieve a conversion efficiency higher than that of a liquid counterpart. The high performance of the gel-electrolyte is attributed to the in situ gelation property of the gel-electrolyte, the contribution of the PAN-VA to the charge transfer, as well as the enhancement effect of TiO(2) fillers on the charge transfer at the Pt-electrolyte interface.