A Unique Monitoring Method for Fecal and Sewage-Derived Chemical Pollution Utilizing International Pellet Watch Approach.

This study established a unique approach to assess fecal contamination by measuring fecal sterols, especially coprostanol (5β-cholestanol-3β-ol, 5β) and cholestanol (5α-cholestan-3β-ol, 5α) and their ratio 5β/(5β + 5α) alongside triclosan (TCS) and methyl-triclosan (MTC) in beached plastic pellets across 40 countries. Coprostanol concentrations ranged from 3.6 to 8190 ng/g pellet with extremely high levels in densely populated areas in African countries.

Microplastic-sorbed persistent organic pollutants in coastal Mediterranean Sea areas of Tunisia.

Microplastics (MPs) are emerging pollutants of global concern due to their pervasiveness, high sorption ability for persistent organic pollutants (POPs) and direct and indirect toxicity to marine organisms, ecosystems, as well as humans. As one of the major coastal interfaces, beaches are considered among the most affected ecosystems by MPs pollution. The morphological characteristics of MPs (pellets and fragments) collected from four beaches along the Tunisian coast and sorbed POPs, including polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs), were investigated in this study.

Diffuse reflectance spectroscopy (DRS) and infrared (IR) measurements for studying biofilm formation on common plastic litter polymer (LDPE and PET) surfaces in three different laboratory aquatic environments.

Different species of microorganisms colonize the plastic surfaces and form biofilms depending on the aquatic environment. In the current investigation, characteristics of the plastic surface after exposure to three different aquatic environments based on visualization using scanning electron microscopy (SEM) and spectroscopic (diffuse reflectance (DR) and infrared (IR)) techniques were examined in laboratory bioreactors with time. For both materials, there were no differences observed in the ultraviolet (UV) region among the reactors and several peaks were observed with fluctuating intensities and without any trends.

Extruded polystyrene microplastics as a source of brominated flame retardant additives in the marine environment: long-term field and laboratory experiments.

Microplastics (MPs) in the environment have become a global concern, not only for the physical effects of the plastic particles themselves but also for being vectors of chemical additives. In this context, little is known about the ability of MPs, particularly extruded polystyrene microplastics (XPS-MPs), to release organic chemical additives in the marine environment. In this study, a series of field and laboratory experiments were carried out to determine the leaching behaviour of organic additives including brominated flame retardants from XPS-MPs into seawater.

Physicochemical and Toxicological Assay of Leachate from Malt Spent Rootlets Biochar.

The aim of this study was to characterize the leachate derived from biochar produced from malt spent rootlets (MSR) and to evaluate the required washing level in order to provide water free from inorganic substances. MSR biochar was placed in a column and subjected to six serial washes with distilled water, and the leachate was analysed for main anions and heavy metals. The 1st wash aliquot contained increased levels of mainly phosphates (980 mg/L) and chlorides (760 mg/L), and lower levels of nitrates, sulfates, fluoride and bromide, which were decreased over washes.

Using diffuse reflectance spectroscopy (DRS) technique for studying biofilm formation on LDPE and PET surfaces: laboratory and field experiments.

Biofilm formation on plastic debris needs to be further investigated, because microorganisms attached to plastics are transferred in all three dimensions to new regions by ocean currents. The current study aims to investigate biofilm formation on plastic strips in aquatic ecosystems using a simple physicochemical method commonly used to characterize solid surfaces, namely, the diffuse reflectance UV-Vis spectroscopy (DRS) method. Using virgin polymers that have not being exposed to the environment as a reference, DRS peaks can be attributed to the microorganisms attached to the polymer surface with time.

Application of nuclear techniques to environmental plastics research.

Plastic pollution is ubiquitous in aquatic environments and its potential impacts to wildlife and humans present a growing global concern. Despite recent efforts in understanding environmental impacts associated with plastic pollution, considerable uncertainties still exist regarding the true risks of nano- and micro-sized plastics (<5 mm). The challenges faced in this field largely relate to the methodological and analytical limitations associated with studying plastic debris at low (environmentally relevant) concentrations.

Surface properties of beached plastics.

Studying plastic characteristics in the marine environment is important to better understand interaction between plastics and the environment. In the present study, high-density polyethylene (HDPE), polyethylene terephalate (PET), and polyvinyl chloride (PVC) samples were collected from the coastal environment in order to study their surface properties. Surface properties such as surface functional groups, surface topography, point of zero charge, and color change are important factors that change during degradation.

Magnetite impregnation effects on the sorbent properties of activated carbons and biochars.

This paper discusses the sorbent properties of magnetic activated carbons and biochars produced by wet impregnation with iron oxides. The sorbents had magnetic susceptibilities consistent with theoretical predictions for carbon-magnetite composites. The high BET surface areas of the activated carbons were preserved in the synthesis, and enhanced for one low surface area biochar by dissolving carbonates.

A critical evaluation of magnetic activated carbon's potential for the remediation of sediment impacted by polycyclic aromatic hydrocarbons.

Addition of activated carbon (AC) or biochar (BC) to sediment to reduce the chemical and biological availability of organic contaminants is a promising in-situ remediation technology. But concerns about leaving the adsorbed pollutants in place motivate research into sorbent recovery methods. This study explores the use of magnetic sorbents.

Levels and fate of perfluoroalkyl substances in beached plastic pellets and sediments collected from Greece.

Plastic debris damages marine wildlife and ecosystems becoming an important source of marine pollution. In addition, they can sorb, concentrate and stabilise contaminants acting as toxic carriers to the marine food web. In this context, the presence of 18 perfluoroalkyl substances (PFASs) in plastic pellets (n=5) and beach sediment (n=9) samples widely distributed around Greek coastal areas was assessed.

Alcohol and dilution water characteristics in distilled anis (ouzo).

The authenticity of some mixed drinks such as vodka or rum was correlated to the conductivity of the dilution water. Authentic drinks demonstrated low conductivity, suggesting the use of treated water, whereas fraud drinks were mixed with regular tap water. The objective of the present study was to test if this criterion is valid for distilled anis, also known as ouzo.

Aqueous phenanthrene toxicity after high-frequency ultrasound degradation.

Given that polycyclic aromatic hydrocarbons (PAHs), such as phenanthrene (PH), possess a potent risk for aquatic biota, a great attempt to develop and apply advanced oxidation processes, such as ultrasound (US), is of great concern nowadays. However, because US PAH-derived toxic intermediates are difficult to detect, the present study investigates aqueous PH toxicity before and after high-frequency US degradation, in hemocytes of mussel Mytilus galloprovincialis. Specifically, cell viability (with the use of neutral red uptake/NRU method), and oxidative-stress indices in terms of superoxide anions, (O2(-)), nitric oxides (NO, in terms of nitrites), lipid peroxidation products (in terms of malondialdehyde/MDA content) and DNA damage (with the use of Comet assay method) were investigated in mussel hemocytes exposed to environmentally relevant concentrations of PH (0.

Phenanthrene removal from aqueous solutions using well-characterized, raw, chemically treated, and charred malt spent rootlets, a food industry by-product.

Malt spent rootlets (MSR) are biomaterials produced in big quantities by beer industry as by-products. A sustainable solution is required for their management. In the present study, MSR are examined as sorbents of a hydrophobic organic compound, phenanthrene, from aqueous solutions.

Responses of Lumbriculus variegatus to activated carbon amendments in uncontaminated sediments.

Activated carbon (AC) amendment is a recently developed sediment remediation method. The strong hydrophobic organic contaminant sorption efficiency of AC has been shown in several studies, but effects on benthic organisms require more investigation. The AC induced effects on egestion rate, growth and reproduction of Lumbriculus variegatus were studied by applying bituminous coal based AC in three different particle size fractions, namely <63 μm (90%, AC(p)), 63-200 μm (AC(m)) and 1000 μm (AC(g)), to natural uncontaminated (HS) and artificial sediment (AS).

Surface properties of beached plastic pellets.

The presence of pollutants on plastic debris is an emerging environmental hot topic. Understanding the surface alteration of plastics while in the marine environment increases our understanding of the pollutant-plastic debris interaction. Plastic pellets are widely distributed throughout the world oceans.

Assessing the effect of grain-scale sorption rate limitations on the fate of hydrophobic organic groundwater pollutants.

Subsurface pollutant transport models accounting for sorption rate limitations are computationally more demanding than those assuming local sorption equilibrium. We combine batch and column tests with modeling for a comparative assessment of different sorption models. For the relatively hydrophobic compound naphthalene, a model assuming local sorption equilibrium was unable to reproduce breakthrough curves in column studies with Canadian River Alluvium sediment which contains carbonaceous particles.

Degradation of PAHs by high frequency ultrasound.

Polycyclic aromatic hydrocarbons (PAHs) are persistent organic compounds, which have been reported in the literature to efficiently degrade at low (e.g. 20 kHz) and moderate (e.

International Pellet Watch: global monitoring of persistent organic pollutants (POPs) in coastal waters. 1. Initial phase data on PCBs, DDTs, and HCHs.

Samples of polyethylene pellets were collected at 30 beaches from 17 countries and analyzed for organochlorine compounds. PCB concentrations in the pellets were highest on US coasts, followed by western Europe and Japan, and were lower in tropical Asia, southern Africa and Australia. This spatial pattern reflected regional differences in the usage of PCBs and was positively correlated with data from Mussel Watch, another monitoring approach.

Diffusive partitioning tracer test for the quantification of nonaqueous phase liquid (NAPL) in the vadose zone: performance evaluation for heterogeneous NAPL distribution.

A partitioning tracer test based on gas-phase diffusion in the vadose zone yields estimates of the residual nonaqueous phase liquid (NAPL) saturation. The present paper investigates this technique further by studying diffusive tracer breakthrough curves in the vadose zone for a heterogeneous NAPL distribution. Tracer experiments were performed in a lysimeter with a horizontal layer of artificial kerosene embedded in unsaturated sand.

Testing phenanthrene distribution properties of virgin plastic pellets and plastic eroded pellets found on Lesvos island beaches (Greece).

Plastic pellets have been characterized as toxic pollutant carriers throughout the world oceans and coastal zones. However, their sorptive properties are not yet well understood. In the present study, virgin pellets and plastic eroded pellets (PEP) are used to elucidate their distribution characteristics through distribution kinetic studies.

Phenanthrene and pyrene sorption and intraparticle diffusion in polyoxymethylene, coke, and activated carbon.

We report sorption isotherms and uptake kinetics for phenanthrene and pyrene with three organic model sorbents: polyoxymethylene (POM), coke, and activated carbon. We combine batch equilibration and kinetic experiments with the direct observation of the long-term diffusion of phenanthrene and pyrene as measured within cross-sectioned particles using microprobe laser-desorption laser-ionization mass spectroscopy (muL2MS). For POM pellets, the intraparticle concentration profiles predicted from kinetic batch experiments and a polymer diffusion model with spherical geometry are in agreement with the independent muL2MS measurements.