Development and mechanistic study of phosphate tailings based soil heavy metal prophylactic agents with encapsulated structure for lead stabilization and phosphorus speciation in soils.

The development of materials for the remediation of the environment from solid waste represents an effective utilization strategy. This study presents a novel phosphorus-based slow-release soil agent (SLPs) developed through acid activation of phosphorus tailings. SLPs aim to improve soil properties by gradually releasing phosphorus (P), reducing Pb mobility, and preventing heavy metal contamination.

Activated electrolytic manganese residue-based environmental materials for mine remediation: Performance and mechanism.

To address the environmental hazards of electrolytic manganese residue (EMR) accumulation and the urgent need for ecological restoration in mining areas, we developed an innovative method for creating pit restoration materials (S-EMRs) using alkaline-excited EMR via mechanical ball milling. Black liquid (BL) was used as a base exciter and EMR as the precursor. With a BL dosage of 35 %, alumina as the milling medium, a speed of 500 rpm, and milling for 20-35 min, we achieved an S-EMR compressive strength of approximately 30 MPa after 14 d-six times higher than that in conventional cement curing (C-EMR).

Phosphorus-based soil prophylactics for managing Pb contamination in soil: Slow-release kinetics and microbiological effects.

Soil remediation poses significant challenges due to its spatial heterogeneity, surpassing the complexities of atmospheric and water remediation. This study introduces an innovative approach to prevent soil heavy metal pollution by developing three phosphorus slow-release heavy metal soil prophylactic agents (SLPs) - Sap-11, Sap-12, and Sap-21. At a liquid-to-solid ratio of 1:20, the three types of SLPs achieve phosphorus sustained slow release amounts of 1.

Pollution control performance of solidified nickel-cobalt tailings on site: Bioavailability of heavy metals and microbial response.

There has been increasing attention given to nickel-cobalt tailings (NCT), which pose a risk of heavy metal pollution in the field. In this study, on site tests and sampling analysis were conducted to assess the physical and chemical characteristics, heavy metal toxicity, and microbial diversity of the original NCT, solidified NCT, and the surrounding soil. The research results show that the potential heavy metal pollution species in NCT are mainly Ni, Co, Mn, and Cu.

Preparation of Cementitious Materials from Mechanochemically Modified Copper Smelting Slag Compounded with High-Aluminum Fly Ash.

Copper smelting slag discharged from mining and high-aluminum fly ash generated during the combustion of coal for energy production are two typical bulk solid wastes, which are necessary to carry out harmless and resourceful treatment. This research proposed an eco-friendly and economical method for the co-consumption of copper smelting slag and high-aluminum fly ash. Cementitious materials were compounded with copper smelting slag and high-aluminum fly ash as the main materials were successfully prepared, with a 28-d compressive strength up to 31.

Research on Utilizable Calcium from Calcium Carbide Slag with Different Extractors and Its Effect on CO Mineralization.

With the increasing accumulation of alkaline industrial solid waste, the mineralization of CO using alkaline industrial solid waste has broad application prospects. Carbide slag is highly alkaline and contains a large amount of calcium elements, making it an excellent material for CO mineralization. Our idea was to acquire qualified products and fast kinetics by integrating carbide slag utilization and carbon reduction.

Zero-carbon inertization processes of hazardous mine tailings: Mineral physicochemical properties, transformation mechanism, and long-term stability.

Hazardous mine tailings (HMTs) dam failures can cause devastation to the ecology environment, people's lives and property, which require expensive and complicated remediation engineering systematacially. A cheap and sustainable inertization disposal is proposed for de-risking HMTs without any carbon emissions, stabilizing hazardous heavy metal cations within safety minerals and also sequestering CO in the process, simultaneously. Herein, lead-zinc tailings as target HMTs were inertized by using waste rice husk ashes (RHAs) and carbide slag (CS) with a certain ratio, and lead-zinc tailings hardened pastes (LZTHPs) were investigated based on the experimental performance, analytical characteristics, and simulation diffusion methods, to deeply unveil the minerals transformation mechanisms and long-term stability from the cation perspectives.

Investigation of waste alkali-activated cementing material using municipal solid waste incineration fly ash and dravite as precursors: Mechanisms, performance, and on-site application.

The proper treatment of municipal solid waste incineration fly ash (MSWIFA) is a crucial concern due to its hazardous nature and potential environmental harm. To address this issue, this study innovatively utilized dravite and black liquor to solidify MSWIFA. The semi-dry pressing method was employed, resulting in the production of waste alkali-activated cementing material (WACM).

Efficient carbamazepine degradation by modified copper tailings and PMS system: Performance evaluation and mechanism.

It is a green and sustainable path to establish cheap solid waste-based catalyst to establish peroxymonosulfate (PMS) catalytic system for the degradation of carbamazepine (CBZ) in water. In this study, durable copper tailing waste residue-based catalyst (CSWR) was prepared, and efficient CSWR/PMS system was constructed for catalytic degradation of CBZ for first time. The morphology and structure of CSWR changed from clumps to porous and loose amorphous by alkali leaching and medium temperature calcination.

Ferrihydrite-loaded water hyacinth-derived biochar for efficient removal of glyphosate from aqueous solution.

Ferrihydrite-loaded water hyacinth-derived biochar (FH/WHBC) was prepared by in-situ precipitation method to treat glyphosate-containing wastewater. The adsorption properties and mechanism, and actual application potential were deeply studied. Results showed that the adsorption performance of FH/WHBC was closely related with the precipitation pH condition, and the adsorbent prepared at pH 5.

Submicron tourmaline enhanced the solidification of municipal solid waste incineration fly ash by chemical structure reorganization and stabilized heavy metals.

Municipal solid waste incineration fly ash (MSWIFA) exsits in large quantitities and contains pollutants such as heavy metal. While solidification is one of the most effective methods for treating MSWIFA, this application is limited by cost, subsequent treatment, and simultaneous immobilization of anions and cations. This research demonstrated that under a certain initial pressure (20 MPa), a gelation reaction involving ball milling-modified tourmaline powder, a small amount of cement clinker, and MSWIFA forms a stable consolidated body and significantly reduces the risk of heavy metal dissolution.

A novel expansive soil hardener: performance and mechanism of immersion stability.

Aiming at the existing problems of poor treatment effect and immersion stability of expansive soils, a slag soil hardener (SSH, developed by Wuhan University, China) was combined with different additives to dispose in this study. The free expansion rate, compressive strength, and immersion stability of samples were compared, and the influences of different additives, curing age, and dry density on the process and mechanism of improvement were discussed. The experimental results indicated that SSH combined with quicklime had the best improvement effect on expansive soils, in which the mass ratio of raw materials was: expansive soil/SSH/quicklime = 92/4/4, and the free expansion rate decreased from 45.

Selective recovery of glyphosine from glyphosate mother liquor using a modified biosorbent: Competitive substitution adsorption.

Here, an easy to prepare, environmentally friendly, and highly efficient biosorbent was synthesized for the selective recovery of glyphosine from glyphosate mother liquor. Batch adsorption and continuous fixed-bed column experiments were conducted to determine its adsorption properties and evaluate its potential towards practical applications. The results showed that the biosorbent exhibited a fast adsorption rate and high adsorption capacity (296.

Simultaneous removal of lead, manganese, and copper released from the copper tailings by a novel magnetic modified biosorbent.

Potentially toxic elements including lead (Pb), manganese (Mn), and copper (Cu) released from copper tailings would cause severe long-term environmental risks and potential threats to human health. To prevent these negative effects caused by the release of the metals, a novel magnetic carboxyl groups modified bagasse with high adsorption affinity and strong magnetism was synthesized through an in-situ precipitation method and used to simultaneously remove Pb, Mn, and Cu from the eluate of copper tailings. Results showed that release of Pb, Mn, and Cu from the copper tailings was pH, time, and particle size dependent, and maximum concentrations of them released in the eluate was 1.

Selection of green remediation alternatives for chemical industrial sites: An integrated life cycle assessment and fuzzy synthetic evaluation approach.

The concept of green site remediation calls for a model that can consider environmental impacts in the selection of site remediation alternatives. In this study, an integrated life cycle assessment (LCA)-fuzzy synthetic evaluation (FSE) model is developed to help practitioners select the optimal site remediation plan by incorporating life cycle impacts into the comprehensive suitability evaluation. The LCA module quantifies environmental and economic impacts using ReCiPe and Input-Output LCA methods, respectively.

Water column leaching recovery manganese and ammonium sulfate from electrolytic manganese residue: extremely low water consumption toward practical applications.

Regional contamination by electrolytic manganese residue (EMR) not only composes a serious environmental problem but also leads to severe valuable resources waste. Directly recovering manganese and ammonium sulfate is a promising way, but it is still challenging to efficiently recover without high water consumption. Herein, a recovery method based on water column leaching under extremely low water consumption was firstly reported.

Acid rain-dependent detailed leaching characteristics and simultaneous immobilization of Pb, Zn, Cr, and Cd from hazardous lead-zinc tailing.

In acidic medium, hazardous heavy metals of lead-zinc tailing (LZT) are easily leachable and mobilizable. Thus, the hazard, amount, form, and complexity of the leached heavy metals under acidic precipitation become a major environmental concern. This work investigates the gangue minerals, toxicity, speciation, leaching characteristics of heavy metals in LZT under simulated acid rain, as well as immobilization effects and mechanisms using a sustainable binder.

Multiple environmental risk assessments of heavy metals and optimization of sludge dewatering: Red mud-reed straw biochar combined with Fe activated HO.

In this study, Fe-rich biochar (RMRS-BC) was prepared from red mud and reed straw to improve sludge dewatering and transformation of heavy metals (HMs, including Cd, Cr, Cu, Pb, and Zn). The optimal concentrations of RMRS-BC, Fe, and HO to promote sludge dewaterability were identified by response surface methodology (RSM). The optimal dosages of RMRS-BC, Fe, and HO were 74.

Theoretical hydrogen bonding calculations and proton conduction for Eu(iii)-based metal-organic framework.

A water-mediated proton-conducting Eu(iii)-MOF has been synthesized, which provides a stable proton transport channel that was confirmed by theoretical calculation. The investigation of proton conduction shows that the conductivity of Eu(iii)-MOF obtained at 353 K and 98% RH is 3.5 × 10 S cm, comparable to most of the Ln(iii)-MOF based proton conductors.

Evaluation of different factors on metal leaching from nickel tailings using generalized additive model (GAM).

Compared with sulfide tailings, the oxidation and transformation of certain substances in oxidized tailings into more soluble forms may affect the bioaccumulation and biomagnification properties and enhance the risk of toxic effects in the ecosystem. This study aimed to apply the generalized additive model (GAM) to evaluate factors affecting heavy metal leaching from nickel (Ni) tailings. We created an orthogonal experiment table (L(3)) to evenly distribute the different combinations of factor values.

Dynamic elution of residual ammonium leaching agent from weathered crust elution-deposited rare earth tailings by magnesium chloride.

The release of residual ammonium (RA) leaching agent from weathered crust elution-deposited rare earth tailings would cause serious environmental pollution, and it was necessary to efficiently remove it from the ore body before the mine closure. In this study, occurrence states of the RA were determined and dynamic elution of RA from rare earth tailings by using magnesium chloride as eluent was investigated. Effects of initial concentration, pH, flow rate, and particle size on the ammonium removal efficiency were investigated, and variations of ammonium occurrence states before and after elution were determined.

Sustainable and efficient stabilization/solidification of Pb, Cr, and Cd in lead-zinc tailings by using highly reactive pozzolanic solid waste.

Lead-zinc tailings (LZTs) are industrial by-products containing a large number of heavy metals that seriously harm the ecological environment and human health. This study was performed to propose a sustainable and efficient method for immobilizing Pb, Cr, and Cd in LZTs by using solid waste. To better assess the immobilization performance and mechanism, the leaching toxicity, fraction distribution, unconfined compressive strength, environmental risk assessment, and hydration products were explored.

Influence of persulfate on transformation of phosphorus and heavy metals for improving sewage sludge dewaterability by hydrothermal treatment.

Activated persulfate oxidation has been proven to be an efficient advanced sludge treatment technique to improve sludge dewaterability. This study investigates the influence of persulfate on the transformation of phosphorus (P) and heavy metals (HMs) during the hydrothermal treatment of sewage sludge. The hydrothermal temperature, time, and persulfate concentration are optimized by a Box-Behnken design to obtain the best sludge dewaterability, which is expressed by capillary suction time (CST).