Ameliorating caustic properties of aluminum extraction residue to establish a vegetative cover.

High pH, electrical conductivity (E.C.), and extractable Na levels in the residue remaining after aluminum was extracted from bauxite were greater than can support vigorous plant growth.

Neutralization potential determination of siderite (FeCO3) using selected oxidants.

Siderite (FeCO3) is commonly found in coal overburden and, when present, can cause interference in the determination of neutralization potential (NP). Under acidic testing conditions, FeCO3 reacts to neutralize acid, which contributes to the NP. However, continued weathering of FeCO3 (oxidation of Fe2+ and hydrolysis of Fe3+) produces a neutral to slightly acidic solution.

Dissolution kinetics of iron-, manganese-, and copper-containing synthetic hydroxyapatites.

Micronutrient-substituted synthetic hydroxyapatite (SHA) is being evaluated by the National Aeronautics and Space Administration's (NASA) Advanced Life Support (ALS) Program for crop production on long-duration human missions to the International Space Station or for future Lunar or Martian outposts. The stirred-flow technique was utilized to characterize Ca, P, Fe, Mn, and Cu release characteristics from Fe-, Mn-, and Cu-containing SHA in deionized (DI) water, citric acid, and diethylene-triamine-pentaacetic acid (DTPA). Initially, Ca and P release rates decreased rapidly with time and were controlled by a non-SHA calcium phosphate phase(s) with low Ca/P solution molar ratios (0.

Mineralogical and chemical characterization of iron-, manganese-, and copper-containing synthetic hydroxyapatites.

The National Aeronautics and Space Administration's (NASA) Advanced Life Support (ALS) Program is evaluating the use of Fe-, Mn-, and Cu-containing synthetic hydroxyapatite (SHA) as a slow release fertilizer for crops that might be grown on the International Space Station or at Lunar and Martian outposts. Separate Fe-, Mn-, and Cu-containing SHA materials along with a transition-metal free SHA (pure-SHA) were synthesized using a precipitation method. Chemical and mineralogical analyses determined if and how Fe, Mn, and Cu were incorporated into the SHA structure.

Preparation and analysis of cyclotri- and cyclotetraphosphate and their hydrolysis products in soil.

Cyclotriphosphate (Na(3)P(3)O(9)) and cyclotetraphosphate (Na(4)P(4)O(12)) are not strongly sorbed by soil constituents. Potential movement and efficient plant utilization of P from these compounds are dependent on the hydrolysis of the cyclophosphate ring structure and their hydrolysis products. The objectives of this study were to prepare pure useable quantities of these cyclophosphates and their hydrolysis products and to extract, separate, and analyze these compounds after application to diverse soils.

Characterization of iron, manganese, and copper synthetic hydroxyapatites by electron paramagnetic resonance spectroscopy.

The incorporation of micronutrients (e.g., Fe, Mn, Cu) into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in NASA's Advanced Life Support (ALS) program for long-duration space missions.

Iron sulfide oxidation as influenced by calcium carbonate application.

Two overburden materials, with different FeS2 contents (1.9 and 4.1%) and low acid neutralization potential, were limed with CaCO3 at rates of 0, 25, 50, 75, 100, and 125% based on the amount of CaCO3 needed to provide an acid-base account deficit (A/Ba) of zero (A/Ba = neutralization potential--potential acidity--exchangeable acidity).

Comparative uptake of plutonium from soils by Brassica juncea and Helianthus annuus.

Plutonium uptake by Brassica juncea (Indian mustard) and Helianthus annuus (sunflower) from soils with varying chemical composition and contaminated with Pu complexes (Pu-nitrate [239Pu(NO3)4], Pu-citrate [239Pu(C6H5O7)], and Pu-diethylenetriaminepentaacetic acid (Pu-DTPA [239Pu-C14H23O10N3]) was investigated. Sequential extraction of soils incubated with applied Pu was used to determine the distribution of Pu in the various soil fractions. The initial Pu activity levels in soils were 44.

Solid state 31phosphorus nuclear magnetic resonance of iron-, manganese-, and copper-containing synthetic hydroxyapatites.

The incorporation of micronutrients into synthetic hydroxyapatite (SHA) is proposed for slow release of these nutrients to crops in the National Aeronautics and Space Administration's (NASA's) Advanced Life Support (ALS) program for Lunar or Martian outposts. Solid state 31P nuclear magnetic resonance (NMR) was utilized to examine the paramagnetic effects of Fe3+, Mn2+, and Cu2+ to determine if they were incorporated into the SHA structure. Separate Fe3+, Mn2+, and Cu2+ containing SHA materials along with a transition metal free SHA (pure-SHA) were synthesized using a precipitation method.

Uptake and translocation of plutonium in two plant species using hydroponics.

This study presents determinations of the uptake and translocation of Pu in Indian mustard (Brassica juncea) and sunflower (Helianthus annuus) from Pu contaminated solution media. The initial activity levels of Pu were 18.50 and 37.

Factors affecting the ratio of cation exchange capacity to clay content in lignite overburden.

Unusually high cation exchange capacity (CEC) values relative to clay content are frequently reported for lignite overburden and minesoils. The CEC to percent clay ratio is commonly greater than one and would require that the average charge of the clay fraction be greater than 100 cmol(c) kg(-1). A comparison of methods for particle-size distribution suggests that the major reason lignite overburden samples have CEC to percent clay ratios greater than one is incomplete dispersion of aggregates of clay minerals or shale fragments.

Mobility of the herbicide pyrithiobac through intact soil columns.

The relative mobility of pyrithiobac [sodium 2-chloro-6-(4, 6-dimethoxypyrimidin-2-ylthio)benzoate], a new herbicide used for postemergence control of broadleaf weeds in cotton (Gossypium hirsutum), was evaluated and compared against that of bromide (Br(-)) tracer on four soils representative of cotton-growing regions using intact soil columns under saturated flow conditions. Pyrithiobac breakthrough curves were asymmetrical in shape with significant tailing and displaced to the left of 1 pore volume in the Houston Black clay (fine, montmorillonitic, thermic Udic Pellustert), Orelia fine sandy clay loam (fine-loamy, mixed, hyperthermic Typic Ochraqualfs), and Ships silty clay (very-fine, mixed, thermic Udic Chromustert) soils. Breakthrough of pyrithiobac in the Hidalgo sandy loam soil (fine-loamy, mixed, hyperthermic Typic Calciustoll) was delayed and more symmetrical, with peak pyrithiobac concentration reached after 1.

Modeling transport kinetics in clinoptilolite-phosphate rock systems.

Nutrient release in clinoptilolite-phosphate rock (Cp-PR) systems occurs through dissolution and cation-exchange reactions. Investigating the kinetics of these reactions expands our understanding of nutrient release processes. Research was conducted to model transport kinetics of nutrient release in Cp-PR systems.

Solubility and cation exchange in phosphate rock and saturated clinoptilolite mixtures.

Mixtures of zeolite and phosphate rock (PR) have the potential to provide slow-release fertilization of plants in synthetic soils by dissolution and ion-exchange reactions. This study was conducted to examine solubility and cation-exchange relationships in mixtures of PR and NH4- and K-saturated clinoptilolite (Cp). Batch-equilibration experiments were designed to investigate the effect of PR source, the proportion of exchangeable K and NH4, and the Cp to PR ratio on solution N, P, K, and Ca concentrations.

Lunar outpost agriculture.

America's long-term commitment to a new Space Exploration Initiative has focused attention on the basic requirements for establishing a permanently manned lunar outpost and, ultimately, a martian one. High among these is the development of Regenerative Life Support Systems--with lunar agriculture an essential component--to provide a high level of self-sufficiency.