Selection of Solid-State Plasticizers as Processing Aids for Hot-Melt Extrusion.

The objective of the study was to select solid-state plasticizers for hot-melt extrusion (HME) process. The physical and mechanical properties of plasticizers, in selected binary (polymer:plasticizer) and ternary (active pharmaceutical ingredient:polymer:plasticizer) systems, were evaluated to assess their effectiveness as processing aids for HME process. Indomethacin and Eudragit E PO were selected as model active pharmaceutical ingredient and polymer, respectively.

Hot melt extrusion for amorphous solid dispersions: temperature and moisture activated drug-polymer interactions for enhanced stability.

Hot melt extrudates (HMEs) of indomethacin (IND) with Eudragit EPO and Kollidon VA 64 and those of itraconazole (ITZ) with HPMCAS-LF and Kollidon VA 64 were manufactured using a Leistritz twin screw extruder. The milled HMEs were stored at controlled temperature and humidity conditions. The samples were collected after specified time periods for 3 months.

Hot melt extrusion (HME) for amorphous solid dispersions: predictive tools for processing and impact of drug-polymer interactions on supersaturation.

The processing parameters for HME have been evaluated and the impact of solid state intermolecular drug-polymer interactions on supersaturation has been investigated. Poorly water soluble drugs Indomethacin (IND), Itraconazole (ITZ), and Griseofulvin (GSF) and hydrophilic polymers - Eudragit EPO, Eudragit L-100-55, Eudragit L-100, HPMCAS-LF, HPMCAS-MF, Pharmacoat 603, and Kollidon VA-64 were selected for this study. Solubility parameters calculations (SPCs), differential scanning calorimetry (DSC), and rheological analysis of drug-polymer physical mixtures (PMs) was performed.

Intestinal permeability enhancement of levothyroxine sodium by straight chain fatty acids studied in MDCK epithelial cell line.

Levothyroxine sodium (T4), administered orally, is used for the treatment of hypothyroidism. T4 is a narrow therapeutic index drug with highly variable bioavailability (40-80%). The purpose of the present study was to increase the transepithelial transport of T4 using straight chain fatty acids across Madin-Darby Canine kidney (MDCK) cell line.

A comparative pH-dissolution profile study of selected commercial levothyroxine products using inductively coupled plasma mass spectrometry.

Levothyroxine (T4) is a narrow therapeutic index drug with classic bioequivalence problem between various available products. Dissolution of a drug is a crucial step in its oral absorption and bioavailability. The dissolution of T4 from three commercial solid oral dosage forms: Synthroid (SYN), generic levothyroxine sodium by Sandoz Inc.

Development and validation of an inductively coupled plasma mass spectrometry method for quantification of levothyroxine in dissolution studies.

A simple, sensitive and reproducible inductively coupled plasma mass spectrometry (ICP-MS) method for the direct determination of levothyroxine (T4), based on the analysis of iodide content, in aqueous media was developed. The sample preparation consisted of addition of antimony, as the internal standard, and dilution with a 0.5% ammonia solution.

Stabilization of low glass transition temperature indomethacin formulations: impact of polymer-type and its concentration.

The objectives of this study were to formulate and stabilize amorphous formulation of low T(g) drug (Indomethacin, INM) with selected polymers and compare these formulations based on solubility and dissolution rate studies. Eudragit EPO (EPO), Polyvinylpyrrolidone-vinyl acetate copolymer (PVP-VA), and Polyvinylpyrrolidone K30 (PVPK30) were selected as hydrophilic polymers. The melt extrudates were characterized using differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), intrinsic dissolution rate and solubility studies.

A comparative permeation/release study of different testosterone gel formulations.

The major indication for testosterone (T) treatment is male hypogonadism that is characterized by low serum T concentrations. Although a recently developed hydroalcoholic gel, Androgel, containing 1% T addresses many of the problems associated with the more conventional formulations, the bioavailability of T is only 10% requiring 5 to 10 g of gel to be applied daily. The present study was performed to investigate the effect of isopropyl alcohol (IPA) content as a penetration enhancer based on its ability to prevent skin dryness and in turn to increase T permeation from hydroalcoholic gels.

Effect of formulation and processing variables on the granulation kinetics of hot melt granulation (HMG) process.

The objective of the study was to evaluate the effect of formulation factors, such as type of drug and particulate properties of a drug, and processing variables, i.e. jacket temperature, impeller speed, and scale, on granulation kinetics the of hot-melt granulation (HMG) process.

Improving the dissolution rate of poorly water soluble drug by solid dispersion and solid solution: pros and cons.

The solid dispersions with poloxamer 188 (P188) and solid solutions with polyvinylpyrrolidone K30 (PVPK30) were evaluated and compared in an effort to improve aqueous solubility and bioavailability of a model hydrophobic drug. All preparations were characterized by differential scanning calorimetry, powder X-ray diffraction, intrinsic dissolution rates, and contact angle measurements. Accelerated stability studies also were conducted to determine the effects of aging on the stability of various formulations.

Mechanistic study of solubility enhancement of nifedipine using vitamin E TPGS or solutol HS-15.

The objective of our study was to find mechanisms responsible for solubility enhancement of nifedipine in solid dispersions of vitamin E TPGS and/or solutol HS-15. Solid dispersions of nifedipine with selected polymers such as vitamin E TPGS, solutol HS-15, PEG(1,000), and lipocol C-10 of varying drug/polymer ratios were prepared by a fusion method. The solubility enhancement was found to be in the order of vitamin E TPGS > solutol HS-15 > lipocol C-10 > PEG(1,000).

Characterization of physico-mechanical properties of indomethacin and polymers to assess their suitability for hot-melt extrusion processs as a means to manufacture solid dispersion/solution.

The objective of the study was to characterize the physical and viscoelastic properties of binary mixtures of drug and selected polymers to assess their suitability for use in the hot-melt extrusion (HME) process as a means to improve solubility by manufacturing either solid dispersion or solid solution. Indomethacin (INM) was selected as a model drug. Based on comparable solubility parameters, the selected polymers were Eudragit EPO (EPO), polyvinylpyrrolidone/vinyl acetate copolymer (PVP-VA), polyvinylpyrrolidone K30 (PVPK30), and poloxamer 188 (P188).

Transdermal delivery of nicardipine: an approach to in vitro permeation enhancement.

Nicardipine hydrochloride (NC-HCl), a calcium channel blocker for the treatment of chronic stable angina and hypertension, seems to be a potential therapeutic transdermal system candidate, mainly due to its low dose, short half-life, and high first-pass metabolism. The objective of the present study was to evaluate its flux and elucidate mechanistic effects of formulation components on transdermal permeation of the drug through the skin. Solubility of NC-HCl in different solvent systems was determined using a validated HPLC method.

Formulation and optimization of a sustained-release tablet of ketorolac tromethamine.

The objective of our study was to formulate a sustained-release tablet of Ketorolac tromethamine, which is a nonsteroidal anti-inflammatory agent. A 2(3) full factorial design (8 runs) was selected. The variables studied were the amount of drug (30 and 40 mg), ratio of hydroxypropyl methylcellulose (HPMC)/sodium carboxymethylcellulose (NaCMC) (240/40 and 140/140 mg), and amount of ethylcellulose (140 and 180 mg).