Publications by authors named "Hossam Shoman"

We propose and demonstrate a cost-effective, microring-based, silicon photonic sensor that uses doped silicon detectors and a broadband source. Shifts in the sensing microring resonances are electrically tracked by a doped second microring, which acts as both a tracking element and a photodetector. By tracking the power supplied to this second ring, as the sensing ring's resonance shifts, the effective refractive index change caused by the analyte is determined.

View Article and Find Full Text PDF

An erratum is presented to correct the caption of Fig. 1 and the citation number in Fig. 7(d) in the original article [Opt.

View Article and Find Full Text PDF

We demonstrate a method for measuring on-chip waveguide losses using a single microring resonator with a tunable coupler. By tuning the power coupling to the microring and measuring the microring's through-port transmission at each power coupling, one can separate the waveguide propagation loss and the effects of the coupling to the microring. This method is tolerant of fiber-chip coupling/alignment errors and does not require the use of expensive instruments for phase response measurements.

View Article and Find Full Text PDF

We demonstrate greedy linear descent-based, basic gradient descent-based, two-point step size gradient descent-based, and two-stage optimization method-based automated control algorithms and examine their performance for use with a silicon photonic polarization receiver. With an active feedback loop control process, time-varying arbitrary polarization states from an optical fiber can be automatically adapted and stabilized to the transverse-electric (TE) mode of a single-mode silicon waveguide. Using the proposed control algorithms, we successfully realize automated adaptations for a 10 Gb/s on-off keying signal in the polarization receiver.

View Article and Find Full Text PDF
Article Synopsis
  • Fabrication errors are hindering the widespread use of silicon micro-ring modulators (MRMs), necessitating a solution for post-fabrication adjustments to improve commercialization.* -
  • The new MRM features a tunable two-point coupling scheme, allowing users to modify its operating wavelength and optical bandwidth while keeping its compact size (60 µm×45 µm).* -
  • The MRM has been tested, demonstrating high-speed modulation capabilities of up to 28 Gb/s for NRZ and 19.9 Gb/s for PAM-4, making it suitable for high-bandwidth dense wavelength division multiplexing (DWDM) applications.*
View Article and Find Full Text PDF

We propose and demonstrate broadband, entirely mode-evolution-based, polarization splitter-rotators (PSR) using sub-wavelength grating (SWG) assisted adiabatic waveguides for two SOI platforms. Our PSRs are more compact than previously demonstrated entirely mode-evolution-based designs. The devices were fabricated using two fabrication processes and, in both cases, the measured spectra show close matches to the simulation results.

View Article and Find Full Text PDF

A ring resonator based 4 channel wavelength division multiplexing (WDM) receiver with polarization diversity is demonstrated at 10 Gb/s per channel. By forming a waveguide loop between the two output ports of a polarization splitter-rotator (PSR), the input signals in the quasi-transverse-electric (quasi-TE) and the quasi-transverse-magnetic (quasi-TM) polarizations can be demultiplexed by the same set of ring resonator filters, thus reducing the number of required channel control circuits by half compared to methods which process the two polarizations individually. Large signal measurement results indicate that the design can tolerate a signal delay of up to 30% of the unit interval (UI) between the two polarizations, which implies that compensating for manufacturing variability with optical delay lines on chip is not necessary for a robust operation.

View Article and Find Full Text PDF

A silicon-on-insulator (SOI), bandwidth (BW)-tunable, free-spectral-range (FSR)-free, microring resonator (MRR)-based filter is experimentally demonstrated. The device achieves an FSR-free response at its through and drop ports by using a grating-assisted coupler in one coupling region of the MRR and achieves a non-adjacent channel isolation, (nA), for 400 GHz WDM, greater than 26.7 dB.

View Article and Find Full Text PDF

Thanks to advanced semiconductor microfabrication technology, chip-scale integration and miniaturization of lab-on-a-chip components, silicon-based optical biosensors have made significant progress for the purpose of point-of-care diagnosis. In this review, we provide an overview of the state-of-the-art in evanescent field biosensing technologies including interferometer, microcavity, photonic crystal, and Bragg grating waveguide-based sensors. Their sensing mechanisms and sensor performances, as well as real biomarkers for label-free detection, are exhibited and compared.

View Article and Find Full Text PDF