Selective removal of alkynes from diene mixtures using ether-functionalized Cu(i)-containing ionic liquids as extractants.

Cu(i)-Containing room temperature ionic liquids (Cu-EnA), prepared from CuCl and ether-functionalized ionic liquids (ILs) bearing a methanesulfonate anion (EnA, n = 1, 2 or 3), were thermally stable and highly effective for the removal of alkynes such as isopropenylacetylene (IPA) and 2-butyne (2-BT) contained in dienes like isoprene (2-methyl-1,3-butadiene). Cu-EnA were found to reversibly and selectively interact with IPA and 2-BT, thereby enabling the regeneration of Cu-EnA. Fast atom bombardment (FAB)-mass spectral and computational results imply that EnA consists of an ether-functionalized imidazolium cation and a methanesulfonate-coordinated Cu(i) anion such as [CuCl(CHSO)] ([CuClA]) or [Cu(CHSO)] ([CuA]).

On Why the Two Polymorphs of NaFePO4 Exhibit Widely Different Magnetic Structures: Density Functional Analysis.

Triphylite-NaFePO4 is a cathode material for Na(+)-ion batteries, whereas its alternative polymorph maricite-NaFePO4 is not. These two different polymorphs exhibit widely different magnetic structures; the ordered magnetic structure of triphylite-NaFePO4 below ∼50 K is described by the propagation vector q1 = (0, 0, 0) with collinear spins, and that of maricite-NaFePO4 below ∼13 K is described by q2 = (1/2, 0, 1/2) with noncollinear spins. We probed the causes for these differences by calculating the spin exchange interactions of the two polymorphs and determining the preferred orientations of their high-spin Fe(2+) (d(6), S = 2) ions on the basis of density functional calculations.

Absorption and desorption of SO2 in aqueous solutions of diamine-based molten salts.

SO2 absorption and desorption behaviors were investigated in aqueous solutions of diamine-derived molten salts with a tertiary amine group on the cation and a chloride anion, including butyl-(2-dimethylaminoethyl)-dimethylammonium chloride ([BTMEDA]Cl, pKb=8.2), 1-butyl-1,4-dimethylpiperazinium chloride ([BDMP]Cl, pKb=9.8), and 1-butyl-4-aza-1-azoniabicyclo[2,2,2]octane chloride ([BDABCO]Cl, pKb=11.

Hydrolysis of ionic cellulose to glucose.

Hydrolysis of ionic cellulose (IC), 1,3-dimethylimidazolium cellulose phosphite, which could be synthesized from cellulose and dimethylimidazolium methylphosphite ([Dmim][(OCH3)(H)PO2]) ionic liquid, was conducted for the synthesis of glucose. The reaction without catalysts at 150°C for 12h produced glucose with 14.6% yield.

CO2 absorption and desorption in an aqueous solution of heavily hindered alkanolamine: structural elucidation of CO2-containing species.

The pathways for the CO2 absorption and desorption in an aqueous solution of a heavily hindered alkanolamine, 2-(t-butylamino)ethanol (TBAE) were elucidated by X-ray crystallographic and (13)C NMR spectroscopic analysis. In the early stage of the CO2 absorption, the formation of carbonate species ([TBAEH]2CO3) was predominant, along with the generation of small amounts of zwitterionic species. With the progress of the absorption, the carbonate species was rapidly transformed into bicarbonate species ([TBAEH]HCO3), and the amounts of the zwitterionic species increased gradually.

Nitrile-functionalized tertiary amines as highly efficient and reversible SO2 absorbents.

Three different types of nitrile-functionalized amines, including 3-(N,N-diethylamino)propionitrile (DEAPN), 3-(N,N-dibutylamino)propionitrile (DBAPN), and N-methyl-N,N-dipropionitrile amine (MADPN) were synthesized, and their SO2 absorption performances were evaluated and compared with those of hydroxy-functionalized amines such as N,N-diethyl-N-ethanol amine (DEEA), N,N-dibutyl-N-ethanol amine (DBEA), and N-methyl-N,N-diethanol amine (MDEA). Absorption-desorption cycle experiments clearly demonstrate that the nitrile-functionalized amines are more efficient than the hydroxy-functionalized amines in terms of absorption rate and regenerability. Computational calculations with DBEA and DBAPN revealed that DBEA bearing a hydroxyethyl group chemically interacts with SO2 through oxygen atom, forming an ionic compound with a covalently bound OSO2(-) group.

Role of alkyl group in the aromatic extraction using pyridinium-based ionic liquids.

The performance of N-alkylpyridinium-based ionic liquids with a SCN anion (PyILs) was evaluated for the selective extraction of aromatics from aliphatic hydrocarbons. The aromatic extraction ability of PyILs was greatly enhanced by the presence of a methyl group on the pyridinium ring at the 3- or 4-position, whereas the solubility of the aromatics in the PyILs decreased with increasing the number of methyl groups on the benzene ring. The FT-IR studies revealed that the solubility of an aromatic compound in a PyIL is closely correlated with the degree of aromatic C-H bending frequency shift observed during the dissolution of the aromatic compound in the PyIL: the larger the shift, the higher the solubility.

Carboxylate-assisted formation of alkylcarbonate species from CO(2) and tetramethylammonium salts with a β-amino acid anion.

Tetramethylammonium-based molten salts bearing a β-amino acid anion (TMAAs) are synthesized through Michael addition reactions of amines with methyl acrylate followed by hydrolysis and subsequent neutralization by using aqueous tetramethylammonium hydroxide. The CO(2) capture performances of the TMAAs are evaluated and are shown to interact with CO(2) in a 1:1 mode in both water and alcohol. FTIR and (13)C NMR spectroscopic studies on the interactions of TMAAs with CO(2) indicate that the type of CO(2) adduct varies with the solvent used.

Two-dimensional infrared correlation spectroscopy and principal component analysis on the carbonation of sterically hindered alkanolamines.

Despite the academic and industrial importance of the chemical reaction between carbon dioxide (CO(2)) and alkanolamine, the delicate and precise monitoring of the reaction dynamics by conventional one-dimensional (1D) spectroscopy is still challenging, due to the overlapped bands and the restricted static information. Herein, we report two-dimensional infrared correlation spectroscopy (2D IR COS) and principal component analysis (PCA) on the reaction dynamics of a sterically hindered amine, 2-[(1,1-dimethylethyl)amino]ethanol (TBAE) and CO(2). The formation of carbonate rather than carbamate species, which contribute to the unusual high working capacity of ∼1 mole CO(2) per mole of TBAE at 40 °C, occurs through deprotonation of the hydroxyl group, protonation on the nitrogen atom of the amino group, and formation of a carbonate species due to the steric hindrance of the tert-butyl group.

Ionic-liquid-derived, water-soluble ionic cellulose.

A new type of water-soluble ionic cellulose was obtained by means of the dissolution of cellulose in dimethylimidazolium methylphosphite at elevated temperatures over 120 °C. FTIR spectroscopy, (1)H and (13)C NMR spectroscopy, and elemental analysis results revealed that the repeating unit of the water-soluble cellulose consists of a dialkylimidazolium cation and a phosphite anion bonded to cellulose. The degree of phosphorylation on the cellulose chain was between 0.

Functionalization of reduced graphene oxides by redox-active ionic liquids for energy storage.

The reduced graphene oxides (RGOs) functionalized by pyridinium-based ionic liquids (ILs) with SCN anions revealed 6-fold higher capacitance compared to that of RGOs due to the redox behavior of ILs as well as good rate capability and cycle stability despite the appearance of pseudo-capacitance.

High-efficiency, microscale GaN light-emitting diodes and their thermal properties on unusual substrates.

A method for forming efficient, ultrathin GaN light-emitting diodes (LEDs) and for their assembly onto foreign substances is reported. The LEDs have lateral dimensions ranging from ~1 mm × 1 mm to ~25 μm × 25 μm. Quantitative experimental and theoretical studies show the benefits of small device geometry on thermal management, for both continuous and pulsed-mode operation, the latter of which suggests the potential use of these technologies in bio-integrated contexts.

Anomalous thermal transition and crystallization of ionic liquids confined in graphene multilayers.

Anomalous thermal transition and crystallization behaviors of three room temperature ionic liquids (RTILs) in graphene multilayers (GMLs), in a different manner to bulk RTILs, occurred due to the molecular orientation of the confined system triggered by the complex π-π stacking and hydrogen bonding interactions.

Stretchable, transparent graphene interconnects for arrays of microscale inorganic light emitting diodes on rubber substrates.

This paper describes the fabrication and design principles for using transparent graphene interconnects in stretchable arrays of microscale inorganic light emitting diodes (LEDs) on rubber substrates. We demonstrate several appealing properties of graphene for this purpose, including its ability to spontaneously conform to significant surface topography, in a manner that yields effective contacts even to deep, recessed device regions. Mechanics modeling reveals the fundamental aspects of this process, as well as the use of the same layers of graphene for interconnects designed to accommodate strains of 100% or more, in a completely reversible fashion.

Monolithic integration of arrays of single-walled carbon nanotubes and sheets of graphene.

Sheets of graphene and arrays of single-walled carbon nanotubes (SWNTs) are formed separately using chemical vapor deposition techniques onto different optimized growth substrates. Techniques of transfer printing provide a route to integration, yielding two terminal devices and transistors in which patterned structures of graphene form the electrodes and the SWNTs arrays serve as the semiconducting channels.

Unusual strategies for using indium gallium nitride grown on silicon (111) for solid-state lighting.

Properties that can now be achieved with advanced, blue indium gallium nitride light emitting diodes (LEDs) lead to their potential as replacements for existing infrastructure in general illumination, with important implications for efficient use of energy. Further advances in this technology will benefit from reexamination of the modes for incorporating this materials technology into lighting modules that manage light conversion, extraction, and distribution, in ways that minimize adverse thermal effects associated with operation, with packages that exploit the unique aspects of these light sources. We present here ideas in anisotropic etching, microscale device assembly/integration, and module configuration that address these challenges in unconventional ways.

Binding of uranyl ion by a DNA aptamer attached to a solid support.

A UO(2)(2+)-specific DNA aptamer was attached to aminopolystyrene (aminoPS) using sulfo-SMCC as a crosslinking agent in view of high affinity of DNA for uranyl ion. Capacity of the aptamer-conjugated aminoPS resins for uranyl uptake was measured, revealing that about 0.63 μg of uranium can be complexed to 1g of the resins, which clearly demonstrates that most of DNA aptamers introduced to the resins can strongly bind to uranyl ion.

Ionic liquid-assisted carboxylation of amines by CO2: a mechanistic consideration.

The catalytic roles of ionic liquids (ILs) in the syntheses of 1,3-disubstituted ureas from the carboxylation of amines by CO(2) were experimentally and theoretically investigated. The carboxylation reaction of n-butylamine was greatly facilitated by the presence of an IL and the catalytic activity of the IL was strongly affected by the nucleophilicity of the anion. Computational study on the mechanistic aspects of the carboxylation with methylamine with or without the presence of an IL, 1-ethyl-3-methylimidazolium chloride, implies that the activation energies of the transition states and the intermediate ionic species could be lowered significantly through the multi-interactions of the carbonyl group of CO(2) with both cations and anions of the ILs.

Interionic interactions of binary gels consisting of pyrrolidinium-based zwitterionic compounds and lithium salts.

We demonstrated thermal transitions and physical gelation of binary ionic salts through interionic interactions, which consist of pyrrolidinium-N-propanesulfonate zwitterionic compound (PyrZIC) and lithium bis(trifluorosulfonyl)imide (LiTFSI). The transition behaviors of binary ionic gels were attributed to conformational changes in the cations and anions of PyrZIC and LiTFSI as analyzed by density functional theory (DFT), principal component analysis (PCA), and two-dimensional infrared correlation spectroscopy (2D IR COS). Furthermore, the geometries of binary PyrZIC-LiTFSI systems were strongly influenced by the electrostatic interactions between two ionic salts.

Correlation between hydrogen bond basicity and acetylene solubility in room temperature ionic liquids.

Room temperature ionic liquids (RTILs) are proposed as the alternative solvents for the acetylene separation in ethylene generated from the naphtha cracking process. The solubility behavior of acetylene in RTILs was examined using a linear solvation energy relationship based on Kamlet-Taft solvent parameters including the hydrogen-bond acidity or donor ability (α), the hydrogen-bond basicity or acceptor ability (β), and the polarity/polarizability (π*). It is found that the solubility of acetylene linearly correlates with β value and is almost independent of α or π*.

Cu(I)-containing room temperature ionic liquids as selective and reversible absorbents for propyne.

A Cu(i)-containing room temperature ionic liquid (Cu-RTIL), prepared from CuCl and 1,3-dimethylimidazolium methylphosphite ([DMIM][MeHPO(3)]), was found to reversibly and selectively interact with propyne over propylene. Cu-RTIL exhibited 12 times higher propyne absorption capacity and 14 times higher ideal propyne/propylene selectivity than [DMIM][MeHPO(3)]. Fast atom bombardment (FAB)-mass spectral and computational results with Cu-RTIL (CuCl/[DMIM][MeHPO(3)] = 1/2) strongly imply that the Cu-RTIL contains stable methylphosphite-coordinated anionic Cu(i) species such as CuCl(MeHPO(3))(-) and Cu(MeHPO(3))(2)(-).

GaAs photovoltaics and optoelectronics using releasable multilayer epitaxial assemblies.

Compound semiconductors like gallium arsenide (GaAs) provide advantages over silicon for many applications, owing to their direct bandgaps and high electron mobilities. Examples range from efficient photovoltaic devices to radio-frequency electronics and most forms of optoelectronics. However, growing large, high quality wafers of these materials, and intimately integrating them on silicon or amorphous substrates (such as glass or plastic) is expensive, which restricts their use.

Spectroscopic and computational insight into the intermolecular interactions between Zwitter-type ionic liquids and water molecules.

Geometric and conformational changes of zwitter-type ionic liquids (ZILs) due to hydrogen-bonding interactions with water molecules are investigated by density functional theory (DFT), two-dimensional IR correlation spectroscopy (2D IR COS), and pulsed-gradient spin-echo NMR (PGSE NMR). Simulation results indicate that molecular structures in the optimized states are strongly influenced by hydrogen bonding of water molecules with the sulfonate group or imidazolium and pyrrolidinium rings of 3-(1-methyl-3-imidazolio)propanesulfonate (1) and 3-(1-methyl-1-pyrrolidinio)propanesulfonate (2), respectively. Concentration-dependent 2D IR COS reveals kinetic conformational changes of the two ZIL-H(2)O systems attributable to intermolecular interactions, as well as the interactions of sulfonate groups and imidazolium or pyrrolidinium rings with water molecules.

Selective removal of acetylenes from olefin mixtures through specific physicochemical interactions of ionic liquids with acetylenes.

Imidazolium-based ionic liquids (ILs) bearing an alkylphosphite anion, were highly efficient for the selective removal of acetylenes in olefins. Comparison of solubility data at 313 K and at atmospheric pressure shows that the solubilities of acetylene and propyne in 1,3-dimethylimidazolium methylphosphite ([DMIM][MeHPO(3)]) are about 45 and 20 times higher than those of ethylene and propylene, respectively. Computational and (1)H NMR results clearly demonstrate that there are substantial interactions between the acidic hydrogen atom or atoms of acetylenes and the phosphite anion.

Tracking the transition behavior and dynamics of ionic transport in crystalline ionic gel electrolytes.

The transition behavior and dynamics of ionic transport were strongly influenced by changes in the crystal structure and interaction field of the crystalline ionic gel electrolytes with respect to chemical compositions, as proven by impedance, (7)Li NMR, PCA and 2D IR COS.