Advances in Polymer Binder Materials for Lithium-Ion Battery Electrodes and Separators.

Lithium-ion batteries (LIBs) have become indispensable energy-storage devices for various applications, ranging from portable electronics to electric vehicles and renewable energy systems. The performance and reliability of LIBs depend on several key components, including the electrodes, separators, and electrolytes. Among these, the choice of binder materials for the electrodes plays a critical role in determining the overall performance and durability of LIBs.

A strategy for preparing controllable, superhydrophobic, strongly sticky surfaces using SiO@PVDF raspberry core-shell particles.

In nature, wetting by water droplets on superhydrophobic materials is governed by the Cassie-Baxter or Wenzel models. Moreover, sticky properties, derived from these types of wettings, are required for a wide range of applications involving superhydrophobic materials. As a facile new strategy, a method employing a gaseous fluorine precursor to fabricate core-shell particles, comprising perfectly shaped fluorine shells with adjustable adhesive strength, is described in this paper.

Flexible, Elastic, and Superhydrophobic/Superoleophilic Adhesive for Reusable and Durable Water/Oil Separation Coating.

This study investigates a highly flexible/stretchable and mechanically durable superhydrophobic/superoleophilic coating for efficient oil/water separation and oil absorption. The coating is applied via a simple immersion process using a mixed solution of a biocompatible adhesive (ethyl cyanoacrylate, ECA), a highly stretchable polymer (polycaprolactone, PCL), and superhydrophobic/superoleophilic nanoparticles (fluorine-coated silica nanoparticles, F-SiO NPs) in a solvent, followed by solvent evaporation and ECA polymerization. Polymerized ECA (poly-ECA) in the coating material strongly adheres the F-SiO NPs to the substrate surface, while PCL bestows the rigid poly-ECA with high flexibility.

Light-Designed Shark Skin-Mimetic Surfaces.

Sharks, marine creatures that swim fast and have an antifouling ability, possess dermal denticle structures of micrometer-size. Because the riblet geometries on the denticles reduce the shear stress by inducing the slip of fluid parallel to the stream-wise direction, shark skin has the distinguished features of low drag and antifouling. Although much attention has been given to low-drag surfaces inspired from shark skin, it remains an important challenge to accurately mimic denticle structures in the micrometer scale and to finely control their structural features.

Three-Dimensional Photoengraving of Monolithic, Multifaceted Metasurfaces.

Metasurfaces present a potent platform to manipulate light by the spatial arrangement of sub-wavelength patterns with well-defined sizes and geometries, in thin films. Metasurfaces by definition are planar. However, it would be highly desirable to integrate metasurfaces with diverse, spatially programmed sub-wavelength features into a 3D monolith, to manipulate light within a compact 3D space.

Perfluoropolyether-benzophenone as a highly durable, broadband anti-reflection, and anti-contamination coating.

Anti-reflection and anti-contamination coatings prepared from fluorinated polymers have widespread and important applications, ranging from protective films for corrosion resistance to high-tech microelectronics and medical devices due to their transparency, low refractive index, stain resistance, and antifouling properties. However, the application of existing coatings is hindered by low surface adhesion to the target substrate and weakness when exposed to mechanical stress or damage, resulting in significant limitations to their practical applications. Herein, we incorporate perfluoropolyether (PFPE) with benzophenone (BP) to develop an efficient coating material (PFPE-BP) possessing broadband anti-reflectivity, anti-contamination properties, excellent abrasion resistance, and stability under elevated temperatures and relative humidity.

Light-induced surface patterning of alumina.

Micro/nano-patterned alumina surfaces are important in a variety fields such as chemical/biotechnology, surface science, and microelectro-mechanical systems. However, for patterning alumina surfaces, it still remains a challenge to have a lithographic tool that has large flexibility in design layouts, structural reconfigurability, and a simple fabrication process. In this work, a new alumina-patterning platform that uses a photo-reconfigurable azobenzene-alumina composite as an imprinting material is presented.

Programmable Fabrication of Submicrometer Bent Pillar Structures Enabled by a Photoreconfigurable Azopolymer.

Anisotropic small structures found throughout living nature have unique functionalities as seen by Gecko lizards. Here, we present a simple yet programmable method for fabricating anisotropic, submicrometer-sized bent pillar structures using photoreconfiguration of an azopolymer. A slant irradiation of a p-polarized light on the pillar structure of an azopolymer simply results in a bent pillar structure.

Preparation and electroactive phase adjustment of Ag-doped poly(vinylidene fluoride) (PVDF) films.

The crystallinities of Ag-doped poly(vinylidene fluoride) (PVDF) films were modified by removing Ag using a novel washing process, which allowed control of the ratio of γ- and β-phases. The polarity of the composite film without Ag removal through the washing process reached 98%, and the β-phase content in the total electroactive phase was increased to 61%, according to Fourier-transform infrared spectroscopy. When Ag were removed through a process involving several cycles of washing, filtering, drying, and re-dissolving, the highest ratio of the γ-phase was increased to 67%, 28% higher than that before washing.

Fluorinated Titania Nanoparticle-Induced Piezoelectric Phase Transition of Poly(vinylidene fluoride).

We prepared F-coated rutile titanium dioxide nanoparticles (r-TiO NPs) via simple thermal annealing of titania NPs in poly(vinylidene fluoride) (PVDF) and demonstrated that the F-coated r-TiO NP-doped composite film could efficiently induce piezoelectric phase transition of non-electroactive PVDF due to highly electronegative F bonds on the surface of these NPs. In the case of a 2.0 wt % composite film, 99.

Photo-Reconfigurable Azopolymer Etch Mask: Photofluidization-Driven Reconfiguration and Edge Rectangularization.

Directional photofluidization of azobenzene materials has provided unprecedented opportunities for the structural reconfiguration of circular holes, line gaps, ellipsoidal holes, and nanofunnel-shaped micro/nanoarchitectures. However, all the reconfigured structures have a parabolic or round wall due to the tendency of the photofluidized azobenezene materials to minimize the surface area, which limits their use as a reconfigurable etch-mask for the lithography process. In this work, a simple method is presented that can change the round walls of azopolymer architectures into rectangular walls, which is named rectangularization.

Shaping micro-clusters via inverse jamming and topographic close-packing of microbombs.

Designing topographic clusters is of significant interest, yet it remains challenging as they often lack mobility or deformability. Here we exploit the huge volumetric expansion (up to 3000%) of a new type of building block, thermally expandable microbombs. They consist of a viscoelastic polymeric shell and a volatile gas core, which, within structural confinement, create micro-clusters via inverse jamming and topographical close-packing.

Plasticized Polymer Interlayer for Low-Temperature Fabrication of a High-Quality Silver Nanowire-Based Flexible Transparent and Conductive Film.

Silver nanowires (AgNWs) are one of the most promising materials to replace commercially available indium tin oxide in flexible transparent conductive films (TCFs); however, there are still numerous problems originating from poor AgNW junction formation and improper AgNW embedment into transparent substrates. To mitigate these problems, high-temperature processes have been adopted; however, unwanted substrate deformation prevents the use of these processes for the formation of flexible TCFs. In this work, we present a novel poly(methyl methacrylate) interlayer plasticized by dibutyl phthalate for low-temperature fabrication of AgNW-based TCFs, which does not cause any substrate deformation.

Direct Fabrication of Micro/Nano-Patterned Surfaces by Vertical-Directional Photofluidization of Azobenzene Materials.

Anisotropic movement of azobenzene materials (i.e., azobenzene molecules incorporated in polymer, glass, or supramolecules) has provided significant opportunities for the fabrication of micro/nanoarchitectures.

Fabrication of Free-Standing, Self-Aligned, High-Aspect-Ratio Synthetic Ommatidia.

Free-standing, self-aligned, high-aspect-ratio (length to cross-section, up to 15.5) waveguides that mimic insects' ommatidia are fabricated. Self-aligned waveguides under the lenses are created after exposing photoresist SU-8 film through the negative polydimethylsiloxane (PDMS) lens array.

Light-Induced Surface Patterning of Silica.

Manipulating the size and shape of silica precursor patterns using simple far-field light irradiation and transforming such reconfigured structures into inorganic silica patterns by pyrolytic conversion are demonstrated. The key concept of our work is the use of an azobenzene incorporated silica precursor (herein, we refer to this material as azo-silane composite) as ink in a micromolding process. The moving direction of azo-silane composite is parallel to light polarization direction; in addition, the amount of azo-silane composite movement can be precisely determined by controlling light irradiation time.

Interlocking membrane/catalyst layer interface for high mechanical robustness of hydrocarbon-membrane-based polymer electrolyte membrane fuel cells.

A physical interlocking interface that can tightly bind a sulfonated poly(arylene ether sulfone) (SPAES) membrane and a Nafion catalyst layer in polymer electrolyte fuel cells is demonstrated. Owing to higher expansion with hydration for SPAES than for Nafion, a strong normal force is generated at the interface of a SPAES pillar and a Nafion hole, resulting in an 8-fold increase of the interfacial bonding strength at RH 50% and a 4.7-times increase of the wet/dry cycling durability.

Directional Superficial Photofluidization for Deterministic Shaping of Complex 3D Architectures.

The fabrication of micro- and nanostructures is one of the cornerstones of current materials science and technology. There is a strong interest in processing methods capable of manufacturing engineered complex structures on a large area. A method that is gaining a growing attention in this context is based on surface reshaping of photosensitive materials, such as certain azobenzene derivatives by way of a process of light-induced mass migration, also described as "athermal photofluidization".

Vertically oriented, three-dimensionally tapered deep-subwavelength metallic nanohole arrays developed by photofluidization lithography.

The field-gradient, superficial photo fluidization of azomaterials allows a specific 3D nano-silhouette to be shaped over a large area, so as to get easy access to a 3D-tapered, deep sub-wavelength Au nanohole (20 nm spatial size) array. The squeezing of visible light into the deep sub-wavelength point and the relevant extraordinary optical transmission (EOT) are achieved using this 3D-tapered, 20 nm Au nanohole.

Multi-level micro/nanotexturing by three-dimensionally controlled photofluidization and its use in plasmonic applications.

The Field-Gradient Effect extends the photofluidization of azobenzene materials to 3D, multi-level micro/nanotexturing with a newly conceptualized design strategy based on "field-gradient photofluidization". In particular, we successfully characterized the vertical gradient optical absorption within the azobenzene material and the resulting field-gradient photofluidization both theoretically and experimentally. Furthermore, we could create the heterogeneously integrated micro/nanotextures at any desired surface heights, capability that is potentially beneficial for plasmonic applications.

Directional photofluidization lithography: micro/nanostructural evolution by photofluidic motions of azobenzene materials.

This review demonstrates directional photofluidization lithography (DPL), which makes it possible to fabricate a generic and sophisticated micro/nanoarchitecture that would be difficult or impossible to attain with other methods. In particular, DPL differs from many of the existing micro/nanofabrication methods in that the post-treatment (i.e.