Synthesis and characterization of an anthracene-based low band gap polymer for photovoltaic devices.

We have synthesized an anthracene-based conjugated polymer, poly[(9,10-bis(oct-1-ynyl)anthracene)-alt-(5,6-bis(octyloxy)-4,7-bis(thiophen-2-yl)benzo-[c][1,2,5]-thiadiazole)] (PANTBT), for application in organic photovoltaic devices. It exhibited a number average molecular weight of 14,300 g/mol and was fairly soluble in chlorinated organic solvents due to flexible octynyl- and octyloxy side chains on the anthracene and benzothiadiazole moieties. PANTBT showed absorption covering 300-660 nm.

Cationic conjugated polyelectrolytes-triggered conformational change of molecular beacon aptamer for highly sensitive and selective potassium ion detection.

We demonstrate highly sensitive and selective potassium ion detection against excess sodium ions in water, by modulating the interaction between the G-quadruplex-forming molecular beacon aptamer (MBA) and cationic conjugated polyelectrolyte (CPE). The K(+)-specific aptamer sequence in MBA is used as the molecular recognition element, and the high binding specificity of MBA for potassium ions offers selectivity against a range of metal ions. The hairpin-type MBA labeled with a fluorophore and quencher at both termini undergoes a conformational change (by complexation with CPEs) to either an open-chain form or a G-quadruplex in the absence or presence of K(+) ions.

Synthesis of new fluorene-based copolymers containing an anthracene derivative and their applications in polymeric light-emitting diodes.

We report the synthesis of copolymers containing fluorene and highly soluble anthracene derivatives, of general formula, poly{9,9'-bis-(4-octoloxy-phenyl)-fluorene-2,7-diyl-co-9,10-bis-(decy-1-ynyl)-anthracene-2,6-diyl}s (PFAnts). The PFAnts were synthesized via Suzuki coupling and the feed ratios of the anthracene derivative (Ant) were 1, 5, 10, 30, and 50 mol % of the total amount of monomer. PFAnts showed well-defined high molecular weights and were more soluble in conventional organic solvents.

Synthesis and characterization of a thiazolo[5,4-d]thiazole-based copolymer for high performance polymer solar cells.

A highly processable, new semiconducting polymer, PCDTTz, based on alternating thiazolothiazole and carbazole units was synthesized. The new polymer exhibited a field-effect carrier mobility of up to 3.8 × 10(-3) cm(2) V(-1) s(-1) and bulk heterojunction solar cells made from PCDTTz produced a power conversion efficiency of 4.

A new amorphous semiconducting polythiophene for high-performance organic thin-film transistors.

A new amorphous semiconducting polymer containing dodecylthiophene rings and a rigid thieno[3,2-b]thiophene ring, poly(2,5-bis(3'-dodecyl-2,2'-bithiophen-5-yl)thieno[3,2-b]thiophene) (NAP), was synthesized via a microwave-assisted Stille coupling reaction. The presence of the flexible unsubstituted thiophene ring units next to the rigid fused thiophene ring caused NAP to have an amorphous structure. This structure was confirmed by XRD, AFM, and computational calculations.

New anthracene-thiophene-based copolymers that absorb across the entire UV-vis spectrum for application in organic solar cells.

We report a new class of anthracene-thiophene-based copolymers, PAT4. The UV-vis absorption spectrum of PAT4 was broad and covered the full range of the solar spectrum. The hole mobility of PAT4 was high, up to 0.

Synthesis and photovoltaic properties of cyclopentadithiophene-based low-bandgap copolymers that contain electron-withdrawing thiazole derivatives.

We have synthesized four types of cyclopentadithiophene (CDT)-based low-bandgap copolymers, poly[{4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b']dithiophene-2,6-diyl}-alt-(2,2'-bithiazole-5,5'-diyl)] (PehCDT-BT), poly[(4,4-dioctyl-4H-cyclopenta[2,1-b:3,4-b']dithiophene-2,6-diyl)-alt-(2,2'-bithiazole-5,5'-diyl)] (PocCDT-BT), poly[{4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b']dithiophene-2,6-diyl}-alt-{2,5-di(thiophen-2-yl)thiazolo[5,4-d]thiazole-5,5'-diyl}] (PehCDT-TZ), and poly[(4,4-dioctyl-4H-cyclopenta[2,1-b:3,4-b']dithiophene-2,6-diyl)-alt-{2,5-di(thiophen-2-yl)thiazolo[5,4-d]thiazole-5,5'-diyl}] (PocCDT-TZ), for use in photovoltaic applications. The intramolecular charge-transfer interaction between the electron-sufficient CDT unit and electron-deficient bithiazole (BT) or thiazolothiazole (TZ) units in the polymeric backbone induced a low bandgap and broad absorption that covered 300 nm to 700-800 nm. The optical bandgap was measured to be around 1.

Synthesis and properties of a polyhedral oligomeric silsesquioxane-based new light-emitting nanoparticle.

A polyhedral oligomeric silsesquioxane (POSS)-based electroluminescent nanoparticle, POSS-NPA, which contains anthracenenaphthyl chromophores on each of its eight arms, was easily prepared via the hydrosilylation reaction between octakis(dimethylsiloxy)silsesquioxane and allyl-functionalized 9-naphthalene-2-yl-10-phenyl anthracene chromophores. POSS-NPA was completely soluble in common organic solvents such as chloroform, THF, toluene, p-xylene, and chlorobenzene, and showed good film-forming properties on a quartz plate or an indium tin oxide (ITO) plate, i.e.

Organic thin film transistors using a polyhedral oligomeric silsesquioxane-based photo-patternable insulating material.

We synthesized a new photo-patternable organic/inorganic hybrid material, polyhedral oligomeric silsesquioxane (POSS) derivative containing cyclohexene-1,2-epoxide functional groups (POSS-EPOXY), and fabricated an organic thin film transistor (OTFT) using pentacene as an active p-type organic semiconductor and POSS-EPOXY as a gate dielectric layer to demonstrate its applicability for organic electronics. The pentacene transistor with the POSS-EPOXY layer shows comparable transistor characteristics as that with the prototypical polymeric gate insulator of poly(vinylphenol) (PVP). They exhibit field-effect mobility of micro(FET) approximately 0.

Room temperature fabrication of ZnO nanorod films: synthesis and application as a channel layer of transparent thin film transistors.

We report a single-step, solution-based synthesis even at room temperature utilizing a facile sonochemical method to fabricate ZnO nanocrystalline films consisting of well-aligned nanorods.

Enhanced emission and two-photon absorption cross-section by nanoaggregation of a cyano-substituted stilbene derivative.

This study reports the synthesis and the investigation of optical behaviors of a stilbene derivative, (Z)-2,3-bis[4-(N-4-(diphenylamino)styryl)phenyl]acrylonitrile (StCN). The nanoaggregates of StCN in 50% water/DMF have exhibit an increased fluorescence intensity and a blue shift with emission maximum wavelength with respect to StCN in 100% N, N-dimethylformamide (DMF) solution. This fluorescence enhancement can be attributed to the formation of J-aggregates.

Synthesis of a new polymeric host material for efficient organic electro-phosphorescent devices.

We have synthesized a new polymeric host material for phosphorescent dyes, which can be used in phosphorescent light-emitting layers. An alternating copolymer, composed of N-alkylcarbazole and tetramethylbenzene units was synthesized through the Suzuki coupling reaction. We fabricated electro-phosphorescent devices using the synthesized polymeric host doped with solution-processible green and red phosphorescent dyes.

Soluble and easily crystallized anthracene derivatives: precursors of solution-processable semiconducting molecules.

New soluble anthracene derivatives containing thiophene and phenylenevinylene derivatives were synthesized via well-known synthetic routes. TIPS derivatives were added at the 9,10-positions of anthracene for the solubility and crystallinity. Both of the molecules were found to be promising for high charge mobility and stable organic semiconductors.