Stereoregular Poly(Phenyl Glycidyl Ethers): In Situ Formation of a Polyether Stereocomplex from a Racemic Monomer Mixture.

Polymer stereocomplex formation represents a promising research area as it can improve thermal and mechanical properties of co-crystallized polymer strands of opposite chirality. Polymers that form stereocomplexes commonly feature high stereoregularity and usually require sourcing from enantiopure monomer building blocks. Herein, we report the in situ polyether stereocomplex formation from racemic epoxide monomers, i.

Supersoft Polymer Melts in Binary Blends of Bottlebrush cis-1,4-Polyfarnesene and cis-1,4-Polyisoprene.

Binary blends of polyterpenes are employed comprising cis-1,4-polyfarnesene (PF) with a bottlebrush architecture, and linear cis-1,4-polyisoprene (PI) as model systems toward supersoft polymer melts. The bottlebrush PF results in a low plateau modulus ( Pa) that can further be reduced with the addition of PI. Depending on the fraction of short PI chains in the athermal and nearly isofrictional blends, plateau moduli in the range from 1 to 10 kPa can be achieved.

Polymerization of Epoxides at a Static Oil-Alkaline Water Interface.

'On-water' catalysis entails the significant enhancement of a chemical reaction by water, even when those reactions are known to be water-sensitive. Here, the findings about the anionic ring opening polymerization of epoxides at the static interface between oil and alkaline water are shared. Unexpectedly, high molar mass fractions are observed with the interfacial system presented herein, albeit at very low conversions (< 5%).

Nopadiene: A Pinene-Derived Cyclic Diene as a Styrene Substitute for Fully Biobased Thermoplastic Elastomers.

The bicyclic 1,2-substituted, 1,3-diene monomer nopadiene (1,5)-2-ethenyl-6,6-dimethylbicyclo[3.1.1]hept-2-ene was successfully polymerized by anionic and catalytic polymerization.

Bifunctional Carbanionic Synthesis of Fully Bio-Based Triblock Structures Derived from β-Farnesene and ll-Dilactide: Thermoplastic Elastomers.

Current environmental challenges and the shrinking fossil-fuel feedstock are important criteria for the next generation of polymer materials. In this context, we present a fully bio-based material, which shows promise as a thermoplastic elastomer (TPE). Due to the use of β-farnesene and L-lactide as monomers, bio-based feedstocks, namely sugar cane and corn, can be used.

Tailoring thermoresponsiveness of biocompatible polyethers: copolymers of linear glycerol and ethyl glycidyl ether.

Linear polyglycerol is known as a highly hydrophilic and biocompatible polymer that is currently considered for numerous medical applications. Derived from this well-known structure, the synthesis of highly biocompatible, thermoresponsive polyether copolymers statistical anionic ring-opening copolymerization of ethyl glycidyl ether (EGE) and ethoxy ethyl glycidyl ether (EEGE) is described. Subsequent deprotection of the acetal groups of EEGE yields copolymers of linear glycerol (G) and EGE, P(G--EGE).

Merging Styrene and Diene Structures to a Cyclic Diene: Anionic Polymerization of 1-Vinylcyclohexene (VCH).

We report the first anionic polymerization of 1-vinylcyclohexene (VCH). This structure may be considered as an intermediate between dienes and styrene. The polymerization of this cyclic 1,2-disubstituted 1,3-diene proceeded quantitatively in cyclohexane at 25 °C with sec-butyllithium as an initiator.

End Group Functionality of 95-99%: Epoxide Functionalization of Polystyryl-Lithium Evaluated via Solvent Gradient Interaction Chromatography.

End group functionality is a key parameter of functional polymer chains. The end-capping efficiency of living polystyryl lithium with various epoxides, namely ethylene oxide (EO), ethoxy ethyl glycidyl ether (EEGE) and isopropylidene glyceryl glycidyl ether (IGG), is investigated with solvent gradient interaction chromatography (SGIC). Generally, end-capping efficiencies >95% are observed.

Polyethers Based on Short-Chain Alkyl Glycidyl Ethers: Thermoresponsive and Highly Biocompatible Materials.

The polymerization of short-chain alkyl glycidyl ethers (SCAGEs) enables the synthesis of biocompatible polyethers with finely tunable hydrophilicity. Aliphatic polyethers, most prominently poly(ethylene glycol) (PEG), are utilized in manifold biomedical applications due to their excellent biocompatibility and aqueous solubility. By incorporation of short hydrophobic side-chains at linear polyglycerol, control of aqueous solubility and the respective lower critical solution temperature (LCST) in aqueous solution is feasible.

Ordering kinetics of a tapered copolymer based on isoprene and styrene.

High molar mass copolymers with a tapered interface are mechanically tough materials with an accessible order-to-disorder transition temperature and hence processability. We report the first ordering kinetics for a tapered tetrablock copolymer in comparison to a conventional diblock copolymer made sequentially. We show that tapered copolymers belong to the Brazovskii "universality class," where fluctuations play a dominant role.

The Unique Versatility of the Double Metal Cyanide (DMC) Catalyst: Introducing Siloxane Segments to Polypropylene Oxide by Ring-Opening Copolymerization.

The combination of hydrophobic polydimethylsiloxane (PDMS) blocks with hydrophilic polyether segments plays a key role for silicone surfactants. Capitalizing on the double metal cyanide (DMC) catalyst, the direct (i.e.

Temperature Variation Enables the Design of Biobased Block Copolymers via One-Step Anionic Copolymerization.

A one-pot approach for the preparation of diblock copolymers consisting of polystyrene and polymyrcene blocks is described via a temperature-induced block copolymer (BCP) formation strategy. A monomer mixture of styrene and myrcene is employed. The unreactive nature of myrcene in a polar solvent (tetrahydrofuran) at -78 °C enables the sole formation of active polystyrene macroinitiators, while an increase of the temperature (-38 °C to room temperature) leads to poly(styrene-block-myrcene) formation due to polymerization of myrcene.

Stability of Alkyl Chain-Mediated Lipid Anchoring in Liposomal Membranes.

Lipid exchange among biological membranes, lipoprotein particles, micelles, and liposomes is an important yet underrated phenomenon with repercussions throughout the life sciences. The premature loss of lipid molecules from liposomal formulations severely impacts therapeutic applications of the latter and thus limits the type of lipids and lipid conjugates available for fine-tuning liposomal properties. While cholesterol derivatives, with their irregular lipophilic surface shape, are known to readily undergo lipid exchange and interconvert, e.

Efficiency Boosting of Surfactants with Poly(ethylene oxide)-Poly(alkyl glycidyl ether)s: A New Class of Amphiphilic Polymers.

Twenty years ago, it was found that adding small amounts of amphiphilic block copolymers like poly(ethylene propylene)--poly(ethylene oxide) (PEP--PEO) to microemulsion systems strongly increases the efficiency of medium-chain surfactants to solubilize water and oil. Although being predestined to serve as a milestone in microemulsion research, the effect has only scarcely found its way into applications. In this work, we propose new types of efficiency boosters, namely, poly(ethylene oxide)-poly(alkyl glycidyl ether carbonate)s (PEO--PAlkGE) and their "carbonated" poly(ethylene oxide)-poly(carbonate alkyl glycidyl ether) analogs.

"Dumb" pH-Independent and Biocompatible Hydrogels Formed by Copolymers of Long-Chain Alkyl Glycidyl Ethers and Ethylene Oxide.

The formation and rheological properties of hydrogels based on amphiphilic ABA triblock polyether copolymers are described, relying solely on the hydrophobic interaction of long-chain alkyl glycidyl ether (AlkGE)- based A-blocks that are combined with a hydrophilic poly(ethylene glycol) (PEG) midblock. Via anionic ring-opening copolymerization (AROP), ethylene oxide (EO) and long-chain alkyl glycidyl ethers (AlkGEs) were copolymerized, using deprotonated poly(ethylene glycol) (PEG) macroinitiators ( of 10, 20 kg mol). The polymerization afforded amphiphilic ABA triblock copolymers with molar masses in the range of 21-32 kg mol and dispersities () of = 1.

Long-Chain Alkyl Epoxides and Glycidyl Ethers: An Underrated Class of Monomers.

Long-chain epoxides and specifically alkyl glycidyl ethers represent a class of highly hydrophobic monomers for anionic ring-opening polymerization (AROP), resulting in apolar aliphatic polyethers. In contrast, poly(ethylene glycol) is known for its high solubility in water. The combination of hydrophobic and hydrophilic monomers in block and statistical copolymerization reactions enables the synthesis of amphiphilic polyethers for a wide range of purposes, utilizing micellar interactions in aqueous solutions, e.

Hydroxamic Acid: An Underrated Moiety? Marrying Bioinorganic Chemistry and Polymer Science.

Even 150 years after their discovery, hydroxamic acids are mainly known as the starting material for the Lossen rearrangement in textbooks. However, hydroxamic acids feature a plethora of existing and potential applications ranging from medical purposes to materials science, based on their excellent complexation properties. This underrated functional moiety can undergo a broad variety of organic transformations and possesses unique coordination properties for a large variety of metal ions, for example, Fe(III), Zn(II), Mn(II), and Cr(III).

Acid-Cleavable Poly(ethylene glycol) Hydrogels Displaying Protein Release at pH 5.

PEG is the gold standard polymer for pharmaceutical applications, however it lacks degradability. Degradation under physiologically relevant pH as present in endolysosomes, cancerous and inflammatory tissues is crucial for many areas. The authors present anionic ring-opening copolymerization of ethylene oxide with 3,4-epoxy-1-butene (EPB) and subsequent modification to introduce acid-degradable vinyl ether groups as well as methacrylate (MA) units, enabling radical cross-linking.

A general concept for the introduction of hydroxamic acids into polymers.

Hydroxamic acids (HA) form stable complexes with a large variety of metal-ions, affording hydroxamates with high complexation constants. Hydroxamic acid moieties play a crucial role in the natural iron metabolism. In this work, 1,4,2-dioxazoles linked to a hydroxyl group are introduced as key compounds for the installation of hydroxamic acids at synthetic polymers in well-defined positions.

Solution-processed transparent ferroelectric nylon thin films.

Ferroelectricity, a bistable ordering of electrical dipoles in a material, is widely used in sensors, actuators, nonlinear optics, and data storage. Traditional ferroelectrics are ceramic based. Ferroelectric polymers are inexpensive lead-free materials that offer unique features such as the freedom of design enabled by chemistry, the facile solution-based low-temperature processing, and mechanical flexibility.

Multifunctional Fe(III)-Binding Polyethers from Hydroxamic Acid-Based Epoxide Monomers.

Multiple hydroxamic acids are introduced at poly(ethylene glycol) (PEG) via copolymerization of ethylene oxide with a novel epoxide monomer containing a 1,4,2-dioxazole-protected hydroxamic acid (HAAGE). AB- and ABA-type di- and triblock copolymers as well as statistical copolymers of HAAGE and ethylene oxide are prepared in a molecular weight range between 2600 and 12 000 g mol with low dispersities (Ð < 1.2).

Glycidyl Tosylate: Polymerization of a "Non-Polymerizable" Monomer permits Universal Post-Functionalization of Polyethers.

Glycidyl tosylate appears to be a non-polymerizable epoxide when nucleophilic initiators are used because of the excellent leaving group properties of the tosylate. However, using the monomer-activated mechanism, this unusual monomer can be copolymerized with ethylene oxide (EO) and propylene oxide (PO), respectively, yielding copolymers with 7-25 % incorporated tosylate-moieties. The microstructure of the copolymers was investigated via in situ H NMR spectroscopy, and the reactivity ratios of the copolymerizations have been determined.

Functionalization of Liposomes with Hydrophilic Polymers Results in Macrophage Uptake Independent of the Protein Corona.

Liposomes are established drug carriers that are employed to transport and deliver hydrophilic drugs in the body. To minimize unspecific cellular uptake, nanocarriers are commonly modified with poly(ethylene glycol) (PEG), which is known to minimize unspecific protein adsorption. However, to date, it has not been studied whether this is an intrinsic and specific property of PEG or if it can be transferred to hyperbranched polyglycerol (PG) as well.

Surface Modification of Nanoparticles and Nanovesicles via Click-Chemistry.

Surface modification of nanocarriers offers the possibility of targeted drug delivery, which is of major interest in modern pharmaceutical science. Click-chemistry affords an easy and fast way to modify the surface with targeting structures under mild reaction conditions. Here we describe our current method for the post-preparational surface modification of multifunctional sterically stabilized (stealth) liposomes via copper-catalyzed azide-alkyne cycloaddition (CuAAC) and inverse electron demand Diels-Alder norbornene-tetrazine cycloaddition (IEDDA).

Upright MRI after decompression of spinal stenosis and concurrent spondylolisthesis.

OBJECTIVEThe treatment of patients with spinal stenosis and concurrent degenerative spondylolisthesis is controversial. Two large randomized controlled clinical trials reported contradictory results. The authors hypothesized that a substantial number of patients will show evidence of micro-instability after a sole decompression procedure.