Supramolecular modification of sustainable high-molar-mass polymers for improved processing and performance.

The plastic waste crisis is among humanity's most urgent challenges. However, widespread adoption of sustainable plastics is hindered by their often inadequate processing characteristics and performance. Here, we introduce a bio-inspired strategy for the modification of a representative high molar mass, biodegradable aliphatic polyester that helps overcome these limitations and remains effective at molar masses far greater than the entanglement molar mass.

Multifunctional Aluminum Pre-treatments from End-Functionalized Phosphonic Acid Self-Assembled Monolayers.

Aluminum alloys are used in advanced engineering applications as they possess a combination of favorable properties, including high strength, lightweightness, good corrosion resistance, machineability, and recyclability. Such applications often require forming the sheets into the final components, which is typically aided by an oil-based lubricant, followed by joining them using adhesives, which is hampered by residual lubricant. In this work, aluminum surfaces were modified with different self-assembled monolayers (SAMs), with the goal of significantly reducing the amount of lubricant while simultaneously improving friction properties, forming, and bonding performance.

Synthesis of polysiloxane elastomers modified with sulfonyl side groups and their electromechanical response.

Dielectric elastomer transducers are elastic capacitors that respond to mechanical or electrical stress. They can be used in applications such as millimeter-sized soft robots and harvesters of the energy contained in ocean waves. The dielectric component of these capacitors is a thin elastic film, preferably made of a material having a high dielectric permittivity.

Thermoplastic Toughening of a Semiaromatic Polyamide with an Amino-telechelic Polyethylene.

Semiaromatic polyamides are used for metal replacement in advanced engineering applications to reduce weight and improve efficiency, but their range of application is limited by their inherent lack of ductility and toughness. Here, we combined semiaromatic polyamide poly(hexamethylene terephthalamide-co-isophthalamide) (PA6TI) with up to 30 wt % amine-terminated polyethylene (PE(NH)) by high-temperature melt compounding, which was suggested to lead to the formation of PA-PE block copolymers at the interface between the PE(NH) and the PA6TI. This resulted in PA6TI/PE(NH) blends with smaller, more uniform particle sizes than in PA6TI blended with nonfunctional PE or the commercial impact modifier, maleic anhydride-functionalized styrene-ethylene-butylene-styrene (SEBS) under the same conditions.

Reversible Microscale Assembly of Nanoparticles Driven by the Phase Transition of a Thermotropic Liquid Crystal.

The arrangement of nanoscale building blocks into patterns with microscale periodicity is challenging to achieve via self-assembly processes. Here, we report on the phase-transition-driven collective assembly of gold nanoparticles in a thermotropic liquid crystal. A temperature-induced transition from the isotropic to the nematic phase under anchoring-driven planar alignment leads to the assembly of individual nanometer-sized particles into arrays of micrometer-sized agglomerates, whose size and characteristic spacing can be tuned by varying the cooling rate.

Spontaneous formation of a self-healing carbon nanoskin at the liquid-liquid interface.

Biological membranes exhibit the ability to self-repair and dynamically change their shape while remaining impermeable. Yet, these defining features are difficult to reconcile with mechanical robustness. Here, we report on the spontaneous formation of a carbon nanoskin at the oil-water interface that uniquely combines self-healing attributes with high stiffness.

Transient Elastomers with High Dielectric Permittivity for Actuators, Sensors, and Beyond.

Dielectric elastomers (DEs) are key materials in actuators, sensors, energy harvesters, and stretchable electronics. These devices find applications in important emerging fields such as personalized medicine, renewable energy, and soft robotics. However, even after years of research, it is still a great challenge to achieve DEs with increased dielectric permittivity and fast recovery of initial shape when subjected to mechanical and electrical stress.

Blatter-type radicals as polarizing agents for electrochemical overhauser dynamic nuclear polarization.

Overhauser dynamic nuclear polarization (O-DNP) refers to a microwave-assisted process where an unpaired electron's ( a radical) spin polarization is transferred to surrounding nuclei in solution, thus increasing the nuclear magnetic resonance (NMR) signal intensity of a given substance by several orders of magnitude. The presence of the unpaired electrons, which induces relaxation of the resulting hyperpolarized state when the radiation is halted, can be avoided by electrochemically removing the radicals on demand. We report the use of Blatter-type (benzo[][1,2,4]triazinyl) radicals as polarizing agents, potentially opening the way to highly tunable radicals for electrochemical DNP.

Lamellar carbon-aluminosilicate nanocomposites with macroscopic orientation.

Novel preparative approaches towards lamellar nanocomposites of carbon and inorganic materials are relevant for a broad range of technological applications. Here, we describe how to utilize the co-assembly of a liquid-crystalline hexaphenylene amphiphile and an aluminosilicate precursor to prepare carbon-aluminosilicate nanocomposites with controlled lamellar orientation and macroscopic order. To this end, the shear-induced alignment of a precursor phase of the two components resulted in thin films comprising lamellae with periodicities on the order of the molecular length scale, an "edge-on" orientation relative to the substrate and parallel to the shearing direction with order on the centimeter length scale.

Optical gap and fundamental gap of oligoynes and carbyne.

The optoelectronic properties of various carbon allotropes and nanomaterials have been well established, while the purely sp-hybridized carbyne remains synthetically inaccessible. Its properties have therefore frequently been extrapolated from those of defined oligomers. Most analyses have, however, focused on the main optical transitions in UV-Vis spectroscopy, neglecting the frequently observed weaker optical bands at significantly lower energies.

Structure-Property Relationships in Bithiophenes with Hydrogen-Bonded Substituents.

The use of crystal engineering to control the supramolecular arrangement of π-conjugated molecules in the solid-state is of considerable interest for the development of novel organic electronic materials. In this study, we investigated the effect of combining of two types of supramolecular interaction with different geometric requirements, amide hydrogen bonding and π-interactions, on the π-overlap between calamitic π-conjugated cores. To this end, we prepared two series of bithiophene diesters and diamides with methylene, ethylene, or propylene spacers between the bithiophene core and the functional groups in their terminal substituents.

Crystallization and Organic Field-Effect Transistor Performance of a Hydrogen-Bonded Quaterthiophene.

Crystalline thin films of π-conjugated molecules are relevant as the active layers in organic electronic devices. Therefore, materials with enhanced control over the supramolecular arrangement, crystallinity, and thin-film morphology are desirable. Herein, it is reported that hydrogen-bonded substituents serve as additional structure-directing elements that positively affect crystallization, thin-film morphology, and device performance of p-type organic semiconductors.

Long-Lived Photocharges in Supramolecular Polymers of Low-Band-Gap Chromophores.

Photoinduced charge separation in supramolecular aggregates of π-conjugated molecules is a fundamental photophysical process and a key criterion for the development of advanced organic electronics materials. Herein, the self-assembly of low-band-gap chromophores into helical one-dimensional aggregates, due to intermolecular hydrogen bonding, is reported. Chromophores confined in these supramolecular polymers show strong excitonic coupling interactions and give rise to charge-separated states with unusually long lifetimes of several hours and charge densities of up to 5 mol % after illumination with white light.

Hexayne Amphiphiles and Bolaamphiphiles.

Oligoynes with two or more conjugated carbon-carbon triple bonds are useful precursors for carbon-rich nanomaterials. However, their range of applications has so far been severely limited by the challenging syntheses, particularly in the case of oligoynes with functional groups. Here, we report a universal synthetic approach towards both symmetric and unsymmetric, functionalized hexaynes through the use of a modified Eglinton-Galbraith coupling and a sacrificial building block.

Unusually Long-Lived Photocharges in Helical Organic Semiconductor Nanostructures.

Photocharge generation and formation of long-lived charge carriers are relevant in photosynthesis, photocatalysis, photovoltaics, and organic electronics. A better understanding of the factors that determine these processes in synthetic polymer semiconductors is crucial, but difficult due to their morphological inhomogeneity. Here, we report the formation of exceptionally long-lived photocharges in one-dimensional organic semiconductor nanostructures.

Erratum: Uniform electroactive fibre-like micelle nanowires for organic electronics.

This corrects the article DOI: 10.1038/ncomms15909.

Uniform electroactive fibre-like micelle nanowires for organic electronics.

Micelles formed by the self-assembly of block copolymers in selective solvents have attracted widespread attention and have uses in a wide variety of fields, whereas applications based on their electronic properties are virtually unexplored. Herein we describe studies of solution-processable, low-dispersity, electroactive fibre-like micelles of controlled length from π-conjugated diblock copolymers containing a crystalline regioregular poly(3-hexylthiophene) core and a solubilizing, amorphous regiosymmetric poly(3-hexylthiophene) or polystyrene corona. Tunnelling atomic force microscopy measurements demonstrate that the individual fibres exhibit appreciable conductivity.

Self-Assembled Monolayers as Patterning Tool for Organic Electronic Devices.

The patterning of functional materials represents a crucial step for the implementation of organic semiconducting materials into functional devices. Classical patterning techniques such as photolithography or shadow masking exhibit certain limitations in terms of choice of materials, processing techniques and feasibility for large area fabrication. The use of self-assembled monolayers (SAMs) as a patterning tool offers a wide variety of opportunities, from the region-selective deposition of active components to guiding the crystallization direction.

Templating for hierarchical structure control in carbon materials.

Carbon-based materials show a remarkable variety of physical properties. For this reason, they have recently been explored for many advanced applications and emerging technologies. In the absence of actual "chemical" functionalities in these materials, tailoring these physical properties requires control on all levels of the structural hierarchy, from the atomic structure (carbon connectivity, defects, impurities), to the supramolecular level (domain orientations), nanoscopic length scale (domain sizes, porosity), microscopic structure (morphology), and macroscopic aspects (shape, surface chemistry).

Preparation of Carbon Nanosheets at Room Temperature.

Amphiphilic molecules equipped with a reactive, carbon-rich "oligoyne" segment consisting of conjugated carbon-carbon triple bonds self-assemble into defined aggregates in aqueous media and at the air-water interface. In the aggregated state, the oligoynes can then be carbonized under mild conditions while preserving the morphology and the embedded chemical functionalization. This novel approach provides direct access to functionalized carbon nanomaterials.

Facile synthesis of oligoyne amphiphiles and their rotaxanes.

Carbon-rich organic compounds containing a series of conjugated triple bonds (oligoynes) are relevant synthetic targets, but an improved access to oligoynes bearing functional groups would be desirable. Here, we report the straightforward synthesis of two series of oligoyne amphiphiles with glycoside or carboxylate polar head groups, investigate their self-assembly behavior in aqueous media, and their use as precursors for the formation of oligoyne rotaxanes with cyclodextrin hosts. To this end, we employed mono-, di-, or triacetylenic building blocks that gave access to the corresponding zinc acetylides and allowed for the efficient elongation of the oligoyne segment in few synthetic steps a Negishi coupling protocol.

Solubility and crystallizability: facile access to functionalized π-conjugated compounds with chlorendylimide protecting groups.

Functional π-conjugated molecules are relevant for the preparation of new organic electronic materials with improved performance. However, their synthesis is often rendered difficult by their inherently low solubility, and the permanent attachment of solubilizing groups may change the properties of the material. Here, we introduced the chlorendylimidyl moiety as a new temporary protecting group for the straightforward large-scale synthesis of protected quarter-, sexi-, octathiophene, and perylene bisimide diamine and dicarboxylic acid derivatives.

A toolbox of oligopeptide-modified polymers for tailored elastomers.

Biomaterials are constructed from limited sets of building blocks but exhibit extraordinary and versatile properties, because hierarchical structure formation lets them employ identical supramolecular motifs for different purposes. Here we exert a similar degree of structural control in synthetic supramolecular elastomers and thus tailor them for a broad range of thermomechanical properties. We show that oligopeptide-terminated polymers selectively self-assemble into small aggregates or nanofibrils, depending on the length of the oligopeptides.

Aggregates from perylene bisimide oligopeptides as a test case for giant vibrational circular dichroism.

Vibrational circular dichroism (VCD) spectroscopy has become an excellent tool to study biological nanostructures and biomimetic materials in their functional environment and is thus complementary to otherwise employed diffraction, imaging, and spectroscopy methods. However, it is still difficult to relate the observed exceptionally large VCD signals to specific structural elements. Here, we systematically studied the VCD signatures of structurally well-defined and thoroughly characterized nanofibrils from oligopeptide-substituted perylene bisimides that comprise single parallel β-sheets.