An integrated paper-based microfluidic platform for screening of early-stage Alzheimer's disease by detecting Aβ42.

Alzheimer's disease (AD) is the leading cause of dementia worldwide, and the development of early screening methods can address its significant health and social consequences. In this paper, we present a rotary-valve assisted paper-based immunoassay device (RAPID) for early screening of AD, featuring a highly integrated on-chip rotary micro-valve that enables fully automated and efficient detection of the AD biomarker (amyloid beta 42, Aβ42) in artificial plasma. The microfluidic paper-based analytical device (μPAD) of the RAPID pre-stores the required assay reagents on a μPAD and automatically controls the liquid flow through a single valve.

Automatic offline-capable smartphone paper-based microfluidic device for efficient biomarker detection of Alzheimer's disease.

Background: Alzheimer's disease (AD) is a prevalent neurodegenerative disease with no effective treatment. Efficient and rapid detection plays a crucial role in mitigating and managing AD progression. Deep learning-assisted smartphone-based microfluidic paper analysis devices (μPADs) offer the advantages of low cost, good sensitivity, and rapid detection, providing a strategic pathway to address large-scale disease screening in resource-limited areas.

Pneumatic piston hydrostatic bioreactor for cartilage tissue engineering.

During exercise, mechanical loads from the body are transduced into interstitial fluid pressure changes which are sensed as dynamic hydrostatic forces by cells in cartilage. The effects of these loading forces in health and disease are of interest to biologists, but the availability of affordable equipment for experimentation is an obstacle to research progress. Here, we report the development of a cost-effective hydropneumatic bioreactor system for research in mechanobiology.

Deep learning-assisted ultra-accurate smartphone testing of paper-based colorimetric ELISA assays.

Smartphone has long been considered as one excellent platform for disease screening and diagnosis, especially when combined with microfluidic paper-based analytical devices (μPADs) that feature low cost, ease of use, and pump-free operations. In this paper, we report a deep learning-assisted smartphone platform for ultra-accurate testing of paper-based microfluidic colorimetric enzyme-linked immunosorbent assay (c-ELISA). Different from existing smartphone-based μPAD platforms, whose sensing reliability is suffered from uncontrolled ambient lighting conditions, our platform is able to eliminate those random lighting influences for enhanced sensing accuracy.

Point-of-care Analysis for Non-invasive Diagnosis of Oral cancer (PANDORA): A technology-development proof of concept diagnostic accuracy study of dielectrophoresis in patients with oral squamous cell carcinoma and dysplasia.

Background: Delays in the identification and referral of oral cancer remain frequent. An accurate and non-invasive diagnostic test to be performed in primary care may help identifying oral cancer at an early stage and reduce mortality. Point-of-care Analysis for Non-invasive Diagnosis of Oral cancer (PANDORA) was a proof-of-concept prospective diagnostic accuracy study aimed at advancing the development of a dielectrophoresis-based diagnostic platform for oral squamous cell carcinoma (OSCC) and epithelial dysplasia (OED) using a novel automated DEPtech 3DEP analyser.

Low-cost, high-throughput and rapid-prototyped 3D-integrated dielectrophoretic channels for continuous cell enrichment and separation.

Microfluidic devices for dielectrophoretic cell separation are typically designed and constructed using microfabrication methods in a clean room, requiring time and expense. In this paper, we describe a novel alternative approach to microfluidic device manufacture, using chips cut from conductor-insulator laminates using a cutter plotter. This allows the manufacture of microchannel devices with micron-scale electrodes along every wall.

Ten-Second Electrophysiology: Evaluation of the 3DEP Platform for high-speed, high-accuracy cell analysis.

Electrical correlates of the physiological state of a cell, such as membrane conductance and capacitance, as well as cytoplasm conductivity, contain vital information about cellular function, ion transport across the membrane, and propagation of electrical signals. They are, however, difficult to measure; gold-standard techniques are typically unable to measure more than a few cells per day, making widespread adoption difficult and limiting statistical reproducibility. We have developed a dielectrophoretic platform using a disposable 3D electrode geometry that accurately (r > 0.

Rhythmic potassium transport regulates the circadian clock in human red blood cells.

Circadian rhythms organize many aspects of cell biology and physiology to a daily temporal program that depends on clock gene expression cycles in most mammalian cell types. However, circadian rhythms are also observed in isolated mammalian red blood cells (RBCs), which lack nuclei, suggesting the existence of post-translational cellular clock mechanisms in these cells. Here we show using electrophysiological and pharmacological approaches that human RBCs display circadian regulation of membrane conductance and cytoplasmic conductivity that depends on the cycling of cytoplasmic K levels.

High-throughput, low-loss, low-cost, and label-free cell separation using electrophysiology-activated cell enrichment.

Currently, cell separation occurs almost exclusively by density gradient methods and by fluorescence- and magnetic-activated cell sorting (FACS/MACS). These variously suffer from lack of specificity, high cell loss, use of labels, and high capital/operating cost. We present a dielectrophoresis (DEP)-based cell-separation method, using 3D electrodes on a low-cost disposable chip; one cell type is allowed to pass through the chip whereas the other is retained and subsequently recovered.

Rapid determination of nanowire electrical properties using a dielectrophoresis-well based system.

The use of high quality semiconducting nanomaterials for advanced device applications has been hampered by the unavoidable variability in the growth of one-dimensional (1D) nanomaterials such as nanowires (NWs) and nanotubes, resulting in highly variable electrical properties across the population. Therefore, assessment of the quality of nanomaterials is vital for the fabrication of high-performance and reliable electronic devices. The controllable selection of high quality NWs has been recently demonstrated using a dielectrophoretic (DEP) NW assembly method; however, no convenient, rapid method has been adopted for the characterization of nanomaterial semiconducting properties.

Accurate quantification of apoptosis progression and toxicity using a dielectrophoretic approach.

A loss of ability of cells to undergo apoptosis (programmed cell death, whereby the cell ceases to function and destroys itself) is commonly associated with cancer, and many anti-cancer interventions aim to restart the process. Consequently, the accurate quantification of apoptosis is essential in understanding the function and performance of new anti-cancer drugs. Dielectrophoresis has previously been demonstrated to detect apoptosis more rapidly than other methods, and is low-cost, label-free and rapid, but has previously been unable to accurately quantify cells through the apoptotic process because cells in late apoptosis disintegrate, making cell tracking impossible.

Simultaneous Tunable Selection and Self-Assembly of Si Nanowires from Heterogeneous Feedstock.

Semiconducting nanowires (NWs) are becoming essential nanobuilding blocks for advanced devices from sensors to energy harvesters, however their full technology penetration requires large scale materials synthesis together with efficient NW assembly methods. We demonstrate a scalable one-step solution process for the direct selection, collection, and ordered assembly of silicon NWs with desired electrical properties from a poly disperse collection of NWs obtained from a supercritical fluid-liquid-solid growth process. Dielectrophoresis (DEP) combined with impedance spectroscopy provides a selection mechanism at high signal frequencies (>500 kHz) to isolate NWs with the highest conductivity and lowest defect density.

Apoptosis progression studied using parallel dielectrophoresis electrophysiological analysis and flow cytometry.

Apoptosis is characterised by many cellular events, but the standard Annexin-V assay identifies two; the transfer of the phospholipid phosphatidylserine (PS) from inner to outer leaflets of the plasma membrane, acting as an "eat me" signal to macrophages, and the permeabilisation of the plasma membrane. In this paper we compare the results from the Annexin-V assay with electrophysiology data obtained in parallel using dielectrophoresis, which highlights two changes in cell electrophysiology; a change in cytoplasmic conductivity which correlates with PS expression, and a membrane conductance spike that correlates with permeabilisation. Combining results from both methods shows a strong inverse relationship between conductivity and PS externalisation.

A dielectrophoretic method of discrimination between normal oral epithelium, and oral and oropharyngeal cancer in a clinical setting.

Despite the accessibility of the oral cavity to clinical examination, delays in diagnosis of oral and oropharyngeal carcinoma (OOPC) are observed in a large majority of patients, with negative impact on prognosis. Diagnostic aids might help detection and improve early diagnosis, but there remains little robust evidence supporting the use of any particular diagnostic technology at the moment. The aim of the present feasibility first-in-human study was to evaluate the preliminary diagnostic validity of a novel technology platform based on dielectrophoresis (DEP).

Efficient dielectrophoretic cell enrichment using a dielectrophoresis-well based system.

Whilst laboratory-on-chip cell separation systems using dielectrophoresis are increasingly reported in the literature, many systems are afflicted by factors which impede "real world" performance, chief among these being cell loss (in dead spaces, attached to glass and tubing surfaces, or sedimentation from flow), and designs with large channel height-to-width ratios (large channel widths, small channel heights) that make the systems difficult to interface with other microfluidic systems. In this paper, we present a scalable structure based on 3D wells with approximately unity height-to-width ratios (based on tubes with electrodes on the sides), which is capable of enriching yeast cell populations whilst ensuring that up to 94.3% of cells processed through the device can be collected in tubes beyond the output.

Continuous flow nanoparticle concentration using alternating current-electroosmotic flow.

Achieving real-time detection of environmental pathogens such as viruses and bacterial spores requires detectors with both rapid action and a suitable detection threshold. However, most biosensors have detection limits of an order of magnitude or more above the potential infection threshold, limiting their usefulness. This can be improved through the use of automated sample preparation techniques such as preconcentration.

Factors affecting particle collection by electro-osmosis in microfluidic systems.

Alternating-current electro-osmosis, a phenomenon of fluid transport due to the interaction between an electrical double layer and a tangential electric field, has been used both for inducing fluid movement and for the concentration of particles suspended in the fluid. This offers many advantages over other phenomena used to trap particles, such as placing particles at an electrode centre rather than an edge; benefits of scale, where electrodes hundreds of micrometers across can trap particles from the molecules to cells at the same rate; and a trapping volume limited by the vortex height, a phenomenon thus far unstudied. In this paper, the collection of particles due to alternating-current electro-osmosis driven collection is examined for a range of particle concentrations, inter-electrode gap widths, chamber heights and media viscosity and density.

Solution processable multi-channel ZnO nanowire field-effect transistors with organic gate dielectric.

The present work focuses on nanowire (NW) applications as semiconducting elements in solution processable field-effect transistors (FETs) targeting large-area low-cost electronics. We address one of the main challenges related to NW deposition and alignment by using dielectrophoresis (DEP) to select multiple ZnO nanowires with the correct length, and to attract, orientate and position them in predefined substrate locations. High-performance top-gate ZnO NW FETs are demonstrated on glass substrates with organic gate dielectric layers and surround source-drain contacts.

Biophysical characteristics reveal neural stem cell differentiation potential.

Background: Distinguishing human neural stem/progenitor cell (huNSPC) populations that will predominantly generate neurons from those that produce glia is currently hampered by a lack of sufficient cell type-specific surface markers predictive of fate potential. This limits investigation of lineage-biased progenitors and their potential use as therapeutic agents. A live-cell biophysical and label-free measure of fate potential would solve this problem by obviating the need for specific cell surface markers.

Real-time cell electrophysiology using a multi-channel dielectrophoretic-dot microelectrode array.

Dielectrophoresis (DEP) has been used for many years for the analysis of the electrophysiological properties of cells. However, such analyses have in the past been time-consuming, such that it can take 30 min or more to collect sufficient data to make valid interpretations from a single DEP spectrum. This has limited the application of the technology to a rapid tool for non-invasive, label-free research in areas from drug discovery to diagnostics.

Rapid, automated measurement of dielectrophoretic forces using DEP-activated microwells.

Dielectrophoresis (DEP) is a physical effect that generates a force on polarisable particles experiencing a non-homogeneous electric field; studying the effect as a function of frequency allows the determination of the electrical properties of that particle, i.e., the electrical permittivity and conductivity.

Dielectrophoresis as a cell characterisation tool.

Dielectrophoresis (DEP) is a technique which offers label-free measurement of cell electrophysiology by monitoring its movement in non-uniform electric fields. In this chapter, the theory underlying DEP is explored, as are the implications of the development of equipment for taking such measurements. Practical considerations such as the selection of a suspending medium are also discussed.

Dielectrophoresis-activated multiwell plate for label-free high-throughput drug assessment.

Dielectrophoresis (DEP) offers many advantages over conventional cell assays such as flow cytometry and patch clamp techniques for assessing cell electrophysiology as a marker for cancer studies and drug interaction assessment. However, despite the advantages offered by DEP analysis, uptake has been low, remaining largely in the academic arena, due to the process of analysis being time-consuming, laborious, and ultimately allowing only serial analysis on small numbers of cells. In this paper we describe a new method of performing DEP analysis based on laminate manufacturing methods.

Rapid-on-chip determination of dielectric properties of biological cells using imaging techniques in a dielectrophoresis dot microsystem.

Dielectrophoresis is a technique whereby polarisable particles are manipulated by non-uniform alternating electric fields. A specific application of this technique is deducing the dielectric properties of cells from analysis of the dielectrophoretic spectrum of that particular cell population. We have developed a new microelectrode geometry consisting of two parallel electrode planes, one of which is patterned with arrays of circular apertures or 'dots'.

Applications of dielectrophoretic/electrohydrodynamic "zipper" electrodes for detection of biological nanoparticles.

A major problem for surface-based detection techniques such as surface plasmon resonance and quartz crystal microbalances is that at low concentrations, diffusion is an insufficient driving force to bring colloidal submicron-scale particles to the detection surface. In order to overcome this, it has previously been demonstrated that a combination of dielectrophoresis and AC-electro-hydrodynamic flow can be used to focus cell-sized particles from suspension onto a large metal surface, in order to improve the detection capabilities of such systems. In this paper we describe how the combination of these two phenomena, using the so-called "zipper" electrode array, can be used to concentrate a wide range of nanoparticles of biological interest, such as influenza virus, dissolved albumin, and DNA molecules as well as latex beads of various sizes.