Nonhalogenated Solvent-Processed Efficient Ternary All-Polymer Solar Cells Enabled by the Introduction of a Naphthyloxy Group into the Side Chain of Polymer Donors.

Conjugated polymer donors are crucial for enhancing the power conversion efficiencies (PCEs) in all-polymer solar cells (All-PSCs) in nonhalogenated solvents. In this work, three wide-band-gap polymer donors (Sil-D1, Ph-Sil-D1, and Nap-Sil-D1) based on dithienobenzothiadiazole (DTBT) and benzodithiophene (BDT) donor moieties optimized by side chain engineering were designed and synthesized. Alkyl (Sil-D1), phenyloxy (Ph-Sil-D1), and naphthyloxy (Nap-Sil-D1) alkyl siloxane side chain units were incorporated into these polymer donors, respectively.

Accomplishing High-Performance Organic Solar Sub-Modules (≈55 cm) with >16% Efficiency by Controlling the Aggregation of an Engineered Non-Fullerene Acceptor.

The fabrication of environmentally benign, solvent-processed, efficient, organic photovoltaic sub-modules remains challenging due to the rapid aggregation of the current high performance non-fullerene acceptors (NFAs). In this regard, design of new NFAs capable of achieving optimal aggregation in large-area organic photovoltaic modules has not been realized. Here, an NFA named BTA-HD-Rh is synthesized with longer (hexyl-decyl) side chains that exhibit good solubility and optimal aggregation.

π-Conjugated Polymer with Pendant Side Chains as a Dopant-Free Hole Transport Material for High-Performance Perovskite Solar Cells.

Dopant-free polymeric hole transport materials (HTMs) have attracted considerable attention in perovskite solar cells (PSCs) due to their high carrier mobilities and excellent hydrophobicity. They are considered promising candidates for HTMs to replace commercial Spiro-OMeTAD to achieve long-term stability and high efficiency in PSCs. In this study, we developed BDT-TA-BTASi, a conjugated donor-π-acceptor polymeric HTM.

Multifunctional Narrow Band Gap Terpolymer-Enabled High-Performance Dopant-Free Perovskite and Additive-Free Organic Solar Cells with Long-Term Stability.

The optoelectronic devices endowing multifunctionality while utilizing a single low-cost material have always been challenging. For this purpose, we adopted a random ternary copolymerization strategy for designing two terpolymers, namely TP-0.8-EG and TP-0.

Finely Tuned Molecular Packing Realized by a New Rhodanine-Based Acceptor Enabling Excellent Additive-Free Small- and Large-Area Organic Photovoltaic Devices Approaching 19 and 12.20% Efficiencies.

A new nonfullerene acceptor (NFA), BTA-ERh, was synthesized and integrated into a PM6:Y7:PCBM ternary system to regulate the blend film morphology for enhanced device performance. Due to BTA-ERh's good miscibility with host active blend films, an optimized film morphology was obtained with appropriate phase separation and fine-tuning of film crystallinity, which ultimately resulted in efficient exciton dissociation, charge transport, lower recombination loss, and decreased trap-state density. The resulting additive-free quaternary devices achieved a remarkable efficiency of 18.

Copper laser patterning on a flexible substrate using a cost-effective 3D printer.

We studied the cost effective direct laser patterning of copper (Cu) on thin polyimide substrates (PI thickness: 12.5-50 µm) using a 405 nm laser module attached to an inexpensive 3D printer. The focal length of the laser was intentionally controlled to reduce defects on patterned Cu and surface damage of PI under predetermined process conditions.

Facile Strategy for Third Component Optimization in Wide-Band-Gap π-Conjugated Polymer Donor-Based Efficient Ternary All-Polymer Solar Cells.

Emerging organic solar cells based on a ternary strategy is one of the most effective methods for improving the blend film morphology, absorption ability, and device performances. On the other hand, this strategy has had very limited success in all-polymer solar cells (all-PSCs) because of the scarcity of new polymers and the challenges faced during third component optimization. Herein, highly efficient ternary all-PSCs were developed from siloxane-functionalized side chains with a wide-band-gap () polymer, Si-BDT, which is blended with a medium and ultra-narrow polymer donor and acceptor, PTB7-Th, and DCNBT-TPIC.

Impact of Aryl End Group Engineering of Donor Polymers on the Morphology and Efficiency of Halogen-Free Solvent-Processed Nonfullerene Organic Solar Cells.

End group engineering on the side chain of π-conjugated donor polymers is explored as an effective way to develop efficient photovoltaic devices. In this work, we designed and synthesized three new π-conjugated polymers (PBDT-BZ-1, PBDT-S-BZ, and PBDT-BZ-F) with terminal aryl end groups on the side chain of chlorine-substituted benzo[1,2-:4,5']dithiophene (BDT). End group modifications showed notable changes in energy levels, dipole moments, exciton lifetimes, energy losses, and charge transport properties.

All-Polymer Solar Cells Approaching 12% Efficiency with a New π-Conjugated Polymer Donor Enabled by a Nonhalogenated Solvent Process.

High efficiency and nonhalogenated solvent processing are important issues for commercial application of all-polymer solar cells (all-PSCs). In this regard, we increased the photovoltaic performance of all-PSCs to a benchmark power conversion efficiency (PCE) of 11.66% by manipulating the pre-aggregation of a new π-conjugated polymer donor (Nap-SiBTz) using toluene as a solvent.

Super Stretchable and Durable Electroluminescent Devices Based on Double-Network Ionogels.

Ionogels are good candidates for flexible electronics owing to their excellent mechanical and electrical properties, including stretchability, high conductivity, and stability. In this study, conducting ionogels comprising a double network (DN) of poly(N-isopropylacrylamide-co-N,N'-diethylacrylamide)/chitosan which are further reinforced by the ionic and covalent crosslinking of the chitosan network by tripolyphosphate and glutaraldehyde, respectively, are prepared. Based on their excellent mechanical properties and high conductivity, the developed DN ionogels are envisioned as stretchable ionic conductors for extremely stretchable alternating-current electroluminescent (ACEL) devices.

External Quantum Efficiency Exceeding 24% with CIE Value of 0.08 using a Novel Carbene-Based Iridium Complex in Deep-Blue Phosphorescent Organic Light-Emitting Diodes.

Deep-blue triplet emitters remain far inferior to standard red and green triplet emitters in terms of exhibiting high-color-purity Commission International de l'Éclairage (CIE) y values of ≤0.1, external quantum efficiencies (EQEs), and high electroluminescent brightnesses in phosphorescent organic light-emitting diodes. In fact, no deep-blue triplet emitter with color purity and high device performance has previously been reported.

An Efficient Amphiphilic-Type Triphenylamine-Based Organic Hole Transport Material for High-Performance and Ambient-Stable Dopant-Free Perovskite and Organic Solar Cells.

A new set of simply structured triphenylamine-based small molecules are synthesized and evaluated as dopant-free hole transporting materials (HTMs) for high-performance perovskite solar cells (PSCs) and bulk heterojunction inverted organic solar cells (BHJ IOSCs). Surprisingly, the new amphiphilic-type HTM-1 (with internal hydrophilic groups and peripheral hydrophobic alkyl tails) showed better compatibility and performance than the actual target molecule, that is, HTM-2 in PSCs and BHJ IOSCs. Importantly, the HTM-1-based dopant-free PSCs and BHJ IOSCs exhibited high power conversion efficiencies (PCEs) of 11.

Triazine-based Polyelectrolyte as an Efficient Cathode Interfacial Material for Polymer Solar Cells.

A novel polyelectrolyte containing triazine (TAZ) and benzodithiophene (BDT) scaffolds with polar phosphine oxide (P═O) and quaternary ammonium ions as pendant groups, respectively, in the polymer backbone (PBTAZPOBr) was synthesized to use it as a cathode interfacial layer (CIL) for polymer solar cell (PSC) application. Owing to the high electron affinity of the TAZ unit and P═O group, PBTAZPOBr could behave as an effective electron transport material. Due to the polar quaternary ammonium and P═O groups, the interfacial dipole moment created by PBTAZPOBr substantially reduced the work function of the metal cathode to afford better energy alignment in the device, thus enabling electron extraction and reducing recombination of excitons at the photoactive layer/cathode interface.

Wafer-Scale Single-Crystalline AB-Stacked Bilayer Graphene.

Single-crystalline artificial AB-stacked bilayer graphene is formed by aligned transfer of two single-crystalline monolayers on a wafer-scale. The obtained bilayer has a well-defined interface and is electronically equivalent to exfoliated or direct-grown AB-stacked bilayers.