Precise control of liposome size using characteristic time depends on solvent type and membrane properties.

Controlling the sizes of liposomes is critical in drug delivery systems because it directly influences their cellular uptake, transportation, and accumulation behavior. Although hydrodynamic focusing has frequently been employed when synthesizing nano-sized liposomes, little is known regarding how flow characteristics determine liposome formation. Here, various sizes of homogeneous liposomes (50-400 nm) were prepared according to flow rate ratios in two solvents, ethanol, and isopropyl alcohol (IPA).

Preparation and Characterization of pH-Sensitive Capsosomes for Oral Delivery of Therapeutic Proteins.

Oral administration of therapeutic proteins is very challenging because of gastrointestinal instability and decomposition. In this study, we developed a system for oral delivery of superoxide dismutase (SOD) as one of the therapeutic proteins. SOD-loaded capsosomes (SOD-C) were formed by the assembly of chitosan-coated solid lipid nanoparticles and SOD-loaded liposomes (SOD-L).

Controlled rate slow freezing with lyoprotective agent to retain the integrity of lipid nanovesicles during lyophilization.

We designed a novel lyophilization method using controlled rate slow freezing (CSF) with lyoprotective agent (LPA) to achieve intact lipid nanovesicles after lyophilization. During the freezing step, LPA prevented water supercooling, and the freezing rate was controlled by CSF. Regulating the freezing rate by various liquid media was a crucial determinant of membrane disruption, and isopropanol (freezing rate of 0.

A Simple Method for Continuous Synthesis of Bicelles in Microfluidic Systems.

Bicelle has great potential for drug delivery systems due to its small size and biocompatibility. The conventional method of bicelle preparation contains a long process and harsh conditions, which limit its feasibility and damage the biological substances. For these reasons, a continuous manufacturing method in mild conditions has been demanded.

Precise Microfluidic Luminescent Sensor Platform with Controlled Injection System.

Efforts have been devoted to screening various prevalent diseases, such as severe acute respiratory syndrome (SARS) and coronavirus disease 2019 (COVID-19). Real-time polymerase chain reaction (RT-PCR), which is currently the most widely used, has high accuracy, but it requires several facilities and takes a relatively long time to check; so, new testing technology is necessary for a higher test efficiency. A chemiluminescence (CL) sensor is a relatively simple device and suitable as an alternative because it can detect very precise specimens.

Hybrid Nanofiber Scaffold-Based Direct Conversion of Neural Precursor Cells/Dopamine Neurons.

The concept of cellular reprogramming was developed to generate induced neural precursor cells (iNPCs)/dopaminergic (iDA) neurons using diverse approaches. Here, we investigated the effects of various nanoscale scaffolds (fiber, dot, and line) on iNPC/iDA differentiation by direct reprogramming. The generation and maturation of iDA neurons (microtubule-associated protein 2-positive and tyrosine hydroxylase-positive) and iNPCs (NESTIN-positive and SOX2-positive) increased on fiber and dot scaffolds as compared to that of the flat (control) scaffold.

Catalytic characteristics of a sn-1(3) regioselective lipase from Cordyceps militaris.

A total of 39 agricultural products were screened for natural sources of lipases with distinctive positional specificity. Based on this, Cordyceps militaris lipase (CML) was selected and subsequently purified by sequential chromatography involving anion-exchange, hydrophobic-interaction, and gel-permeation columns. As a result of the overall purification procedure, a remarkable increase in the specific activity of the CML (4.

Hydrophilic and lipophilic characteristics of non-fatty acid moieties: significant factors affecting antibacterial activity of lauric acid esters.

It has been proposed that the hydrophilic and/or lipophilic characteristics of fatty acid derivatives affect their antibacterial activities according to their ability to incorporate into the bacterial cell membrane. To verify this hypothesis, six kinds of lauric acid derivatives esterified with different non-fatty acid moieties were selected to confirm whether antibacterial activity from their precursor (i.e.

Design of a simple paper-based colorimetric biosensor using polydiacetylene liposomes for neomycin detection.

We developed a paper-based analytical device (μPAD) combined with self-signaling polydiacetylene (PDA) liposomes for convenient visual neomycin detection. The simple dot array type of μPAD was fabricated by the wax printing technique, and the PDA liposomes in the aqueous solution were facilely immobilized onto the hydrophilic dot region of the paper substrate. We found that, when the PDA liposomes were inserted to the paper matrix, the stability of the PDA liposomes can be significantly enhanced by adding a hydrophilic reagent such as polyvinyl alcohol and glycerol to the liposome solution.

Amperometric Detection of Conformational Change of Proteins Using Immobilized-Liposome Sensor System.

An immobilized liposome electrode (ILE)-based sensor was developed to quantify conformational changes of the proteins under various stress conditions. The ILE surface was characterized by using a tapping-mode atomic force microscopy (TM-AFM) to confirm surface immobilization of liposome. The uniform layer of liposome was formed on the electrode.

Mussel-Inspired Universal Bioconjugation of Polydiacetylene Liposome for Droplet-Array Biosensors.

Most solid-state biosensor platforms require a specific immobilization chemistry and a bioconjugation strategy separately to tether sensory molecules to a substrate and attach specific receptors to the sensory unit, respectively. We developed a mussel-inspired universal conjugation method that enables both surface immobilization and bioconjugation at the same time. By incorporating dopamine or catechol moiety into self-signaling polydiacetylene (PDA) liposomes, we demonstrated efficient immobilization of the PDA liposomes to a wide range of substrates, without any substrate modification.

Ultra-sensitive detection of kanamycin for food safety using a reduced graphene oxide-based fluorescent aptasensor.

Overuse of antibiotics has caused serious problems, such as appearance of super bacteria, whose accumulation in the human body through the food chain is a concern. Kanamycin is a common antibiotic used to treat diverse infections; however, residual kanamycin can cause many side effects in humans. Thus, development of an ultra-sensitive, precise, and simple detection system for residual kanamycin in food products is urgently needed for food safety.

Characterization of the physicochemical properties of phospholipid vesicles prepared in CO2/water systems at high pressure.

Phospholipid vesicles were prepared by the nonsolvent method using high-pressure CO2/water systems. The membrane properties of vesicles prepared at different pressures and temperatures were mainly characterized based on analysis of the membrane fluidity and membrane polarity, using the fluorescent probes 1,6-diphenyl-1,3,5-hexatriene and 6-dodecanoyl-N,N-dimethyl-2-naphthylamine, respectively. The CO2(liquid)/water(liquid) and the CO2(supercritical)/water(liquid) two-phase (heterogeneous) systems resulted in the formation of vesicles with high yield (ca.

AOT/isooctane reverse micelles with a microaqueous core act as protective shells for enhancing the thermal stability of Chromobacterium viscosum lipase.

According to the different environmental systems for lipase reactions, changes in thermal stability were investigated by employing the Chromobacterium viscosum lipase and a two-step series-type deactivation model. The half-life (6.81 h) of the lipase entrapped in reverse micelles at 70 °C was 9.

Microfluidic platforms with monolithically integrated hierarchical apertures for the facile and rapid formation of cargo-carrying vesicles.

We fabricated a simple yet robust microfluidic platform with monolithically integrated hierarchical apertures. This platform showed efficient diffusive mixing of the introduced lipids through approximately 8000 divisions with tiny pores (~5 μm in diameter), resulting in massive, real-time production of various cargo-carrying particles via multi-hydrodynamic focusing.

Janus-compartmental alginate microbeads having polydiacetylene liposomes and magnetic nanoparticles for visual lead(II) detection.

Janus-compartmental alginate microbeads having two divided phases of sensory polydiacetylene (PDA) liposomes and magnetic nanoparticles were fabricated for facile sensory applications. The sensory liposomes are composed of PDA for label-free signal generation and 1,2-dipalmitoyl-sn-glycero-3-galloyl (DPGG) lipids whose galloyl headgroup has specific interactions with lead(II). The second phase having magnetic nanoparticles is designed for convenient handling of the microbeads, such as washing, solvent exchange, stirring, and detection, by applying magnetic field.

Effect of surface tension and coefficient of thermal expansion in 30 nm scale nanoimprinting with two flexible polymer molds.

We report on nanoimprinting of polymer thin films at 30 nm scale resolution using two types of ultraviolet (UV)-curable, flexible polymer molds: perfluoropolyether (PFPE) and polyurethane acrylate (PUA). It was found that the quality of nanopatterning at the 30 nm scale is largely determined by the combined effects of surface tension and the coefficient of thermal expansion of the polymer mold. In particular, the polar component of surface tension may play a critical role in clean release of the mold, as evidenced by much reduced delamination or broken structures for the less polarized PFPE mold when patterning a relatively hydrophilic PMMA film.

Design of polydiacetylene-phospholipid supramolecules for enhanced stability and sensitivity.

We present polydiacetylene (PDA) liposome assemblies with various phospholipids that have different headgroup charges and phase transition temperatures (T(m)). 10,12-Pentacosadiynoic acid (PCDA)-epoxy was used as a base PDA monomer and the insertion of highly charged phospholipids resulted in notable changes in the size of liposome and reduction of the aggregation of PDA liposome. Among the various phospholipids, the phospholipid with a moderate T(m) demonstrated enhanced stability and sensitivity, as measured by the size and zeta potential over storage time, thermochoromic response, and transmission electron microscopy images.

Biomimetic detection of aminoglycosidic antibiotics using polydiacetylene-phospholipids supramolecules.

We rationally designed highly sensitive and selective polydiacetylene (PDA)-phospholipids liposomes for the facile detection of aminoglycosidic antibiotics. The detecting mechanism mimics the cellular membrane interactions between neomycin and phosphatidylinositol-4,5-bisphosphate (PIP(2)) phospholipids. The developed PDA-PIP(2) sensory system showed a detection limit of 61 ppb for neomycin and was very specific to aminoglycosidic antibodies only.

Anisotropic adhesion properties of triangular-tip-shaped micropillars.

Directional dry adhesive microstructures consisting of high-density triangular-tip-shaped micropillars are described. The wide-tip structures allow for unique directional shear adhesion properties with respect to the peeling direction, along with relatively high normal adhesion.

High-sensitivity detection of oxytetracycline using light scattering agglutination assay with aptasensor.

We present an aptamer-based biosensor (aptasensor) for rapid and high-sensitive detection of oxytetracycline (OTC) antibiotic in PBS inside a Y-channel PDMS microfluidic device. The detection was made by real-time monitoring of the agglutination assay of ssDNA aptamer-conjugated polystyrene latex microspheres with proximity optical fibers. The agglutination assay was performed with serially diluted OTC antibiotic solutions using highly carboxylated polystyrene particles of 920 nm diameter conjugated with OTC-binding ssDNA aptamer.

Rapid detection of Mycoplasma pneumonia in a microfluidic device using immunoagglutination assay and static light scattering.

We present real-time, rapid detection of Mycoplasma pneumonia in PBS inside a Y-channel PDMS microfluidic device via optical fiber monitoring of latex immunoagglutination. The latex immunoagglutination assay was performed with serially diluted M. pneumonia solutions using highly carboxylated polystyrene particles of 390 and 500 nm diameter conjugated with monoclonal anti-M.

Self-organized functional lipid vesicle array for sensitive immunoassay chip.

We report the self-assembly immobilization of functional lipid vesicles (FLVs) by electrostatic interaction onto N-inscription-nanosized geometrics. The well-organized three-dimensional physical structures of liposome were observed by AFM. Generally, two involved forces for the binding to surfaces and the repulsion between individual liposome are necessary to array lipid vesicles individually similar to the physical configuration in solution.

Single probe nucleic acid immobilization on chemically modified single protein by controlling ionic strength and pH.

In an effort toward determining the feasibility of single molecule analysis, we describe a case whereby the binding of one biotinylated DNA to one streptavidin molecule via electrostatic interactions was controlled by altering in pH 4.0-9.0 and 0.