Silicon photonics 2 × 2 trench coupler design and foundry fabrication.

A 2×2 photonic coupler is realized at the intersection of two 480×220 silicon on insulator waveguides. The designed 2×2 coupler is simulated in both High Frequency Simulator System (HFSS) and Lumerical and shows an equal split of an input signal into transmitted and reflected signals for a 45 deg, ∼100 filled trench. The principle of operation of the coupler is frustrated total internal reflection.

Stability of Ince-Gaussian beams in elliptical core few-mode fibers.

A comparative stability analysis of Ince-Gaussian and Hermite-Gaussian modes in elliptical core few-mode fibers is provided to inform the design of spatial division multiplexing systems. The correlation method is used to construct crosstalk matrices that characterize the spatial modes of the fiber. Up to six low-order modes are shown to exhibit about -20  dB crosstalk.

Continuously tunable photonic fractional Hilbert transformer using a high-contrast germanium-doped silica-on-silicon microring resonator.

We propose and experimentally demonstrate a continuously tunable fractional Hilbert transformer (FHT) based on a high-contrast germanium-doped silica-on-silicon (SOS) microring resonator (MRR). The propagation loss of a high-contrast germanium-doped SOS waveguide can be very small (0.02 dB/cm) while the lossless bend radius can be less than 1 mm.

A continuously tunable multi-tap complex-coefficient microwave photonic filter based on a tilted fiber Bragg grating.

The coupling coefficients of the cladding-mode resonances of a tilted fiber Bragg grating (TFBG) are linearly increasing or decreasing in different wavelength regions. Based on the Kramers-Kronig relations, when the coupling coefficients are linearly increasing, the phase shifts are linearly increasing correspondingly. This feature is employed, for the first time, for the implementation of a multi-tap continuously tunable microwave photonic filter with complex coefficients by using a TFBG.

Tunable microwave photonic phase shifter based on slow and fast light effects in a tilted fiber Bragg grating.

A continuously tunable microwave phase shifter based on slow and fast light effects in a tilted fiber Bragg grating (TFBG) written in an erbium/ytterbium (Er/Yb) co-doped fiber is proposed and experimentally demonstrated. By optically pumping the TFBG, the magnitude and phase responses of the cladding mode resonances are changed, which is used to introduce a tunable phase shift to the optical carrier of a single-sideband modulated signal. The beating between the phase-shifted optical carrier and the sideband will generate a microwave signal with the phase shift from the optical carrier directly translated to the generated microwave signal.