Site-Selective Biofunctionalization of 3D Microstructures Via Direct Ink Writing.

Two-photon lithography has revolutionized multi-photon 3D laser printing, enabling precise fabrication of micro- and nanoscale structures. Despite many advancements, challenges still persist, particularly in biofunctionalization of 3D microstructures. This study introduces a novel approach combining two-photon lithography with scanning probe lithography for post-functionalization of 3D microstructures overcoming limitations in achieving spatially controlled biomolecule distribution.

Surface-Patterned DNA Origami Rulers Reveal Nanoscale Distance Dependency of the Epidermal Growth Factor Receptor Activation.

The nanoscale arrangement of ligands can have a major effect on the activation of membrane receptor proteins and thus cellular communication mechanisms. Here we report on the technological development and use of tailored DNA origami-based molecular rulers to fabricate "Multiscale Origami Structures As Interface for Cells" (MOSAIC), to enable the systematic investigation of the effect of the nanoscale spacing of epidermal growth factor (EGF) ligands on the activation of the EGF receptor (EGFR). MOSAIC-based analyses revealed that EGF distances of about 30-40 nm led to the highest response in EGFR activation of adherent MCF7 and Hela cells.

Patterned immobilization of polyoxometalate-loaded mesoporous silica particles via amine-ene Michael additions on alkene functionalized surfaces.

Polyoxometalates (POM) are anionic oxoclusters of early transition metals that are of great interest for a variety of applications, including the development of sensors and catalysts. A crucial step in the use of POM in functional materials is the production of composites that can be further processed into complex materials, e.g.

A supramolecular cucurbit[8]uril-based rotaxane chemosensor for the optical tryptophan detection in human serum and urine.

Sensing small biomolecules in biofluids remains challenging for many optical chemosensors based on supramolecular host-guest interactions due to adverse interplays with salts, proteins, and other biofluid components. Instead of following the established strategy of developing alternative synthetic binders with improved affinities and selectivity, we report a molecular engineering approach that addresses this biofluid challenge. Here we introduce a cucurbit[8]uril-based rotaxane chemosensor feasible for sensing the health-relevant biomarker tryptophan at physiologically relevant concentrations, even in protein- and lipid-containing human blood serum and urine.

3D Nanolithography by Means of Lipid Ink Spreading Inhibition.

While patterning 2D metallic nanostructures are well established through different techniques, 3D printing still constitutes a major bottleneck on the way to device miniaturization. In this work a fluid phase phospholipid ink is used as a building block for structuring with dip-pen nanolithography. Following a bioinspired approach that relies on ink-spreading inhibition, two processes are presented to build 2D and 3D metallic structures.

Correlated Study of Material Interaction Between Capillary Printed Eutectic Gallium Alloys and Gold Electrodes.

Liquid metals (LMs) play a growing role in flexible electronics and connected applications. Here, LMs come into direct contact with metal electrodes thus allowing for corrosion and additional alloying, potentially compromising device stability. Nevertheless, comprehensive studies on the interfacial interaction of the materials are still sparse.

FluidFM-Based Fabrication of Nanopatterns: Promising Surfaces for Platelet Storage Application.

Platelets are cell fragments from megakaryocytes devoid of the cell nucleus. They are highly sensitive and easily activated by nonphysiological surfaces. Activated platelets have an intrinsic mechanism to release various proteins that participate in multiple pathways, initiating the platelet activation cascade.

Integration of Biofunctional Molecules into 3D-Printed Polymeric Micro-/Nanostructures.

Three-dimensional printing at the micro-/nanoscale represents a new challenge in research and development to achieve direct printing down to nanometre-sized objects. Here, FluidFM, a combination of microfluidics with atomic force microscopy, offers attractive options to fabricate hierarchical polymer structures at different scales. However, little is known about the effect of the substrate on the printed structures and the integration of (bio)functional groups into the polymer inks.

Multiplexed Covalent Patterns on Double-Reactive Porous Coating.

We have conceptualized and demonstrated an approach based on the combination of hydrophobicity, a substrate-independent dip coating as porous material with double residual chemical reactivities for implementing multiplexed, miniaturized and unclonable bulk-infused patterns of different fluorophores following distinct reaction pathways. The embedded hydrophobicity (∼102°) restricted the unwanted spreading of beaded aqueous ink on the coating. The constructions of micropatterns on porous dip-coating via ink-jet printing or microchannel cantilever spotting offered orthogonal read-out and remained readable even after removal of the exterior of the coating.

Protein spot arrays on graphene oxide coatings for efficient single-cell capture.

Biomedical applications such as cell screening or cell-cell interaction studies require placement and adhesion of cells on surfaces with controlled numbers and location. In particular, single-cell arraying and positioning has come into focus as a basis of such applications. An ideal substrate would combine biocompatibility with favorable attributes such as pattern stability and easy processing.

High-precision tabletop microplotter for flexible on-demand material deposition in printed electronics and device functionalization.

Microstructuring, in particular, the additive functionalization of surfaces with, e.g., conductive or bioactive materials plays a crucial role in many applications in sensing or printed electronics.

Direct-Write Patterning of Biomimetic Lipid Membranes In Situ with FluidFM.

The creation of biologically inspired artificial membranes on substrates with custom size and in close proximity to each other not only provides a platform to study biological processes in a simplified manner, but they also constitute building blocks for chemical or biological sensors integrated in microfluidic devices. Scanning probe lithography tools such as dip-pen nanolithography (DPN) have opened a new paradigm in this regard, although they possess some inherent drawbacks like the need to operate in air environment or the limited choice of lipids that can be patterned. In this work, we propose the use of the fluid force microscopy (FluidFM) technology to fabricate biomimetic membranes without losing the multiplexing capability of DPN but gaining flexibility in lipid inks and patterning environment.

Rapid Capture of Cancer Extracellular Vesicles by Lipid Patch Microarrays.

Extracellular vesicles (EVs) contain various bioactive molecules such as DNA, RNA, and proteins, and play a key role in the regulation of cancer progression. Furthermore, cancer-associated EVs carry specific biomarkers and can be used in liquid biopsy for cancer detection. However, it is still technically challenging and time consuming to detect or isolate cancer-associated EVs from complex biofluids (e.

A multiplexed phospholipid membrane platform for curvature sensitive protein screening.

The curvature of lipid membranes plays a key role in many relevant biological processes such as membrane trafficking, vesicular budding and host-virus interactions. In vitro studies on the membrane curvature of simplified biomimetic models in the nanometer range are challenging, due to their complicated nanofabrication processes. In this work, we propose a simple and low-cost platform for curvature sensitive protein screening, prepared through scanning probe lithography (SPL) methods, where lipid bilayer patches of different compositions can be multiplexed onto substrate areas with tailored local curvature.

Thioacetate-Based Initiators for the Synthesis of Thiol-End-Functionalized Poly(2-oxazoline)s.

New functional initiators for the cationic ring-opening polymerization of 2-alkyl-2-oxazolines are described to introduce a thiol moiety at the α terminus. Both tosylate and nosylate initiators carrying a thioacetate group are obtained in multigram scale, from commercial reagents in two steps, including a phototriggered thiol-ene radical addition. The nosylate derivative gives access to a satisfying control over the cationic ring-opening polymerization of 2-ethyl-2-oxazoline, with dispersity values lower than 1.

Enhanced Stability of Lipid Structures by Dip-Pen Nanolithography on Block-Type MPC Copolymer.

Biomimetic lipid membranes on solid supports have been used in a plethora of applications, including as biosensors, in research on membrane proteins or as interfaces in cell experiments. For many of these applications, structured lipid membranes, e.g.

Evaluation of Microfluidic Ceiling Designs for the Capture of Circulating Tumor Cells on a Microarray Platform.

The capture of circulating tumor cells (CTCs) is still a challenging application for microfluidic chips, as these cells are rare and hidden in a huge background of blood cells. Here, different microfluidic ceiling designs in regard to their capture efficiency for CTCs in model experiments and more realistic conditions of blood samples spiked with a clinically relevant amount of tumor cells are evaluated. An optimized design for the capture platform that allows highly efficient recovery of CTCs from size-based pre-enriched samples under realistic conditions is obtained.

Synergies between Surface Microstructuring and Molecular Nanopatterning for Controlling Cell Populations on Polymeric Biointerfaces.

Polymeric biointerfaces are already being used extensively in a wide set of biomedical devices and systems. The possibility of controlling cell populations on biointerfaces may be essential for connecting biological systems to synthetic materials and for researching relevant interactions between life and matter. In this study, we present and analyze synergies between an innovative approach for surface microstructuring and a molecular nanopatterning procedure of recent development.

How Does Chemistry Influence Liquid Wettability on Liquid-Infused Porous Surface?

Design of Nepenthes pitcher-inspired slippery liquid-infused porous surface (SLIPS) appeared as an important avenue for various potential and practically relevant applications. In general, hydrophobic base layers were infused with selected liquid lubricants for developing chemically inert SLIPS. Here, in this current study, an inherently hydrophilic (soaked beaded water droplet with ∼20° within a couple of minutes), porous and thick (above 200 μm) polymeric coating, loaded with readily chemically reactive acrylate moieties yielded a chemically reactive SLIPS, where residual acrylate groups in the synthesized hydrophilic and porous interface rendered stability to the infused lubricants.

Evaluation of click chemistry microarrays for immunosensing of alpha-fetoprotein (AFP).

The level of cancer biomarkers in cells, tissues or body fluids can be used for the prediction of the presence of cancer or can even indicate the stage of the disease. Alpha-fetoprotein (AFP) is the most commonly used biomarker for early screening and diagnosis of hepatocellular carcinoma (HCC). Here, a combination of three techniques (click chemistry, the biotin-streptavidin-biotin sandwich strategy and the use of antigen-antibody interactions) were combined to implement a sensitive fluorescent immunosensor for AFP detection.

Covalently Modulated and Transiently Visible Writing: Rational Association of Two Extremes of Water Wettabilities.

Anticounterfeiting measures are of ever-increasing importance in society, e.g., for securing the authenticity of and the proof of origin for medical drugs.

Facilitating an International Research Experience Focused on Applied Nanotechnology and Surface Chemistry for American Undergraduate Students Collaborating with Mentors at a German Educational and Research Institution.

The "International Research Experience for Students (IRES)" at Doane University (DU) located in Crete, Nebraska, exposed undergraduate science, technology, engineering, and mathematics (STEM) students to international research at the Karlsruhe Institute of Technology (KIT) in Germany. The international collaboration team included three undergraduate researchers per year from DU, one faculty member and one postdoctoral fellow from DU, two faculty mentors at KIT, and several graduate, post-doctoral, and technical staff at KIT. Prior to departure to Germany, the students received extensive research training, as well as culture and language preparation from the mentors at DU.

Aptamer Conformation-Cooperated Enzyme-Assisted Surface-Enhanced Raman Scattering Enabling Ultrasensitive Detection of Cell Surface Protein Biomarkers in Blood Samples.

Developing novel strategies for sensitive and specific detection of protein biomarkers is a field of active research. Here, we report an ultrasensitive biosensor to detect protein tyrosine kinase-7 (PTK7), an important protein biomarker on the cell surface, by aptamer conformation-cooperated enzyme-assisted surface-enhanced Raman scattering (SERS) (ACCESS) technology. Our approach features a synergistic combination of the conformational alteration of the anglerfish aptamer triggered by the recognition of the membrane protein (PTK7) and Exo III enzyme-assisted nucleic acid amplification.

Writing Behavior of Phospholipids in Polymer Pen Lithography (PPL) for Bioactive Micropatterns.

Lipid-based membranes play crucial roles in regulating the interface between cells and their external environment, the communication within cells, and cellular sensing. To study these important processes, various lipid-based artificial membrane models have been developed in recent years and, indeed, large-area arrays of supported lipid bilayers suit the needs of many of these studies remarkably well. Here, the direct-write scanning probe lithography technique called polymer pen lithography (PPL) was used as a tool for the creation of lipid micropatterns over large areas via polymer-stamp-mediated transfer of lipid-containing inks onto glass substrates.