Simultaneous Measurement of Strain and Temperature Distributions Using Optical Fibers with Different GeO and BO Doping.

Compensating for the effects of temperature is a crucial issue in structural health monitoring when using optical fiber sensors. This study focused on the change in sensitivity due to differences in GeO2 and B2O3 doping and then verified the accuracy when measuring the strain and temperature distributions simultaneously. Four types of optical fiber sensors were utilized to measure the strain and temperature in four-point bending tests, and the best combination of the sensors resulted in strain and temperature errors of 28.

Quick response hydrogen LSPR sensor based on a hetero-core fiber structure with palladium nanoparticles.

A novel fiber optic localized surface plasmon resonance (LSPR) hydrogen sensor has been developed based on the hetero-core structured with palladium nanoparticles (PdNPs) onto a cylindrical cladding surface. In a light-intensity-based experiment with an LED operating at 850 nm, it has been observed that a transmitted loss change of 0.23 dB was induced with response and recovery times of 1.

Fiber-optic simultaneous distributed monitoring of strain and temperature for an aircraft wing during flight.

We applied a fiber optic distributed simultaneous strain and temperature measurement technique to the structural monitoring of the main wing of a middle-sized passenger jet aircraft during flight. We used 40 10 cm long fiber Bragg gratings (FBGs), inscribed in a highly birefringent polarization-maintaining fiber. The FBGs were interrogated by optical frequency domain reflectometry, which could measure Bragg wavelength distributions at a sampling rate of 151 Hz.

Vibration monitoring of a helicopter blade model using the optical fiber distributed strain sensing technique.

We demonstrate a dynamic distributed monitoring technique using a long-length fiber Bragg grating (FBG) interrogated by optical frequency domain reflectometry (OFDR) that measures strain at a speed of 150 Hz, spatial resolution of 1 mm, and measurement range of 20 m. A 5 m FBG is bonded to a 5.5 m helicopter blade model, and vibration is applied by the step relaxation method.

Distributed strain measurement based on long-gauge FBG and delayed transmission/reflection ratiometric reflectometry for dynamic structural deformation monitoring.

In this paper, we propose a delayed transmission/reflection ratiometric reflectometry (DTR(3)) scheme using a long-gauge fiber Bragg grating (FBG), which can be used for dynamic structural deformation monitoring of structures of between a few to tens of meters in length, such as airplane wings and helicopter blades. FBG sensors used for multipoint sensing generally employ wavelength division multiplexing techniques utilizing several Bragg central wavelengths; by contrast, the DTR(3) interrogator uses a continuous pulse array based on a pseudorandom number code and a long-gauge FBG utilizing a single Bragg wavelength and composed of simple hardware devices. The DTR(3) scheme can detect distributed strain at a 50 cm spatial resolution using a long-gauge FBG with a 100 Hz sampling rate.

A hydrogen curing effect on surface plasmon resonance fiber optic hydrogen sensors using an annealed Au/Ta₂O₅/Pd multi-layers film.

In this paper, a response time of the surface plasmon resonance fiber optic hydrogen sensor has successfully improved with keeping sensor sensitivity high by means of hydrogen curing (immersing) process of annealed Au/Ta2O5/ Pd multi-layers film. The hydrogen curing effect on the response time and sensitivity has been experimentally revealed by changing the annealing temperatures of 400, 600, 800°C and through observing the optical loss change in the H2 curing process. When the 25-nm Au/60-nm Ta2O5/10-nm Pd multi-layers film annealed at 600°C is cured with 4% H2/N2 mixture, it is found that a lot of nano-sized cracks were produced on the Pd surface.

Signal processing method based on group delay calculation for distributed Bragg wavelength shift in optical frequency domain reflectometry.

A signal processing method based on group delay calculations is introduced for distributed measurements of long-length fiber Bragg gratings (FBGs) based on optical frequency domain reflectometry (OFDR). Bragg wavelength shifts in interfered signals of OFDR are regarded as group delay. By calculating group delay, the distribution of Bragg wavelength shifts is obtained with high computational efficiency.