The liquid metal dealloying (LMD) process enables the fabrication of porous metals with various chemical compositions. Despite its advantages, LMD still faces key challenges such as maintaining the high-temperature molten metal bath for a prolonged time, avoiding the use of toxic etchants, and so on. To overcome these challenges, the study develops a water-leachable and oxidation-resistant alloy melt (AM) in Ca-Mg binary system.
View Article and Find Full Text PDFCrack-free nanocellular graphenes are attractive materials with extraordinary mechanical and electrochemical properties, but their homogeneous synthesis on the centimeter scale is challenging. Here, a strong nanocellular graphene film achieved by the self-organization of carbon atoms using liquid metal dealloying and employing a defect-free amorphous precursor is reported. This study demonstrates that a Bi melt strongly catalyzes the self-structuring of graphene layers at low processing temperatures.
View Article and Find Full Text PDFMetastability engineering is a strategy to enhance the strength and ductility of alloys via deliberately lowering phase stability and prompting deformation-induced martensitic transformation. The advantages of the strategy are widely exploited by ferrous medium-entropy alloys (MEAs) that exhibit phase transformation from metastable face-centered cubic (FCC) to hexagonal close-packed (HCP) or body-centered cubic (BCC) martensite and a significant increase in work hardening. FeCoNiAlTiMo (at%) MEA is an example of such materials, which shows ~1.
View Article and Find Full Text PDFIntermetallic compounds formed from non-precious transition metals are promising cost-effective and robust catalysts for electrochemical hydrogen production. However, the development of monolithic nanoporous intermetallics, with ample active sites and sufficient electrocatalytic activity, remains a challenge. Here we report the fabrication of nanoporous CoMo and FeMo intermetallic compounds via liquid metal dealloying.
View Article and Find Full Text PDFSurface plasmon resonance is a well-established technology for real-time highly sensitive label-free detection and measurement of binding kinetics between biological samples. A common drawback, however, of surface plasmon resonance detection is the necessity for far field angular resolved measurement of specular reflection, which increases the size as well as requiring precise calibration of the optical apparatus. Here we present an alternative optoelectronic approach in which the plasmonic sensor is integrated within a photovoltaic cell.
View Article and Find Full Text PDFGlass transition is one of the unresolved critical issues in solid-state physics and materials science, during which a viscous liquid is frozen into a solid or structurally arrested state. On account of the uniform arrested mechanism, the calorimetric glass transition temperature (T) always follows the same trend as the dynamical glass transition (or α-relaxation) temperature (T) determined by dynamic mechanical analysis (DMA). Here, we explored the correlations between the calorimetric and dynamical glass transitions of three prototypical high-entropy metallic glasses (HEMGs) systems.
View Article and Find Full Text PDFHigh-entropy alloys (HEAs) have attracted extensive interest due to their unprecedented structure and mechanical performance. We recently proposed a series of novel corich twinning induced plasticity (TWIP) and transformation induced plasticity (TRIP) HEAs with superior tensile properties at room temperature; however, the hot deformation behavior has not been reported. Here, we investigated the dynamic recrystallization behavior and grain refinement of a representative TRIP-HEA, compressed at temperatures of 1123-1273 K with strain rates of 0.
View Article and Find Full Text PDFSurface functionalization is an effective approach to change the surface properties of a material to achieve a specific goal such as improving the biocompatibility of the material. Here, the surface of the commercial biomedical Ti-6Al-7Nb alloy was functionalized through synthesizing of a porous surface layer by liquid metal dealloying (LMD). During LMD, the Ti-6Al-7Nb alloy is immersed in liquid magnesium (Mg) and both materials react with each other.
View Article and Find Full Text PDFControlling the feature sizes of 3D bicontinuous nanoporous (3DNP) materials is essential for their advanced applications in catalysis, sensing, energy systems, etc., requiring high specific surface area. However, the intrinsic coarsening of nanoporous materials naturally reduces their surface energy leading to the deterioration of physical properties over time, even at ambient temperatures.
View Article and Find Full Text PDFTitanium carbide (TiC), is the most thermodynamically stable compound in the Ti-C-Cu system, which makes it a suitable reinforcement phase for copper matrix composites. In this work, the interaction of a Ti-Cu alloy with different forms of carbon was investigated to trace the structural evolution leading to the formation of in-situ TiC-Cu composite structures. The reaction mixtures were prepared from TiCu alloy ribbons and carbon black or nanodiamonds to test the possibilities of obtaining fine particles of TiC using ball milling and Spark Plasma Sintering (SPS).
View Article and Find Full Text PDFFabrication of magnetic nanostructures at low cost is strongly desired for applications such as sensors, actuators, magnetic memory, etc. In conventional nano-patterning techniques, the magnetic field of a magnetic material interferes with the patterning process, making nano-patterning challenging. Here, we report on the low cost patterning potential of FeCo-based magnetic metallic glass using a nano-imprinting technique.
View Article and Find Full Text PDFMaterials (Basel)
October 2018
Even though the Mg-based bulk metallic glasses (BMGs) have shown superior anti-corrosion properties compared with their crystalline counterparts, the brittleness of them limits the widespread application of these materials. In the present study, we have firstly introduced porous NiTi shape memory alloy particles into an Mg-Zn-Ca BMG by the direct adding method. This composite showed both improved compressive strength and corrosion resistance in Hank's solutions than its monolithic glassy counterpart.
View Article and Find Full Text PDFTiZrCuPd Bulk Metallic Glass (BMG) appears very attractive for future biomedical applications thanks to its high glass forming ability, the absence of toxic elements such as Ni, Al or Be and its good mechanical properties. For the first time, a complete and exhaustive characterization of a unique batch of this glassy alloy was performed, together with ISO standard mechanical tests on machined implant-abutment assemblies. The results were compared to the benchmark Ti-6Al-4V ELI (Extra-Low-Interstitial) to assess its potential in dental implantology.
View Article and Find Full Text PDFNanoporous materials, especially those fabricated by liquid metal dealloying processes, possess great potential in a wide range of applications due to their high surface area, bicontinuous structure with both open pores for transport and solid phase for conductivity or support, and low material cost. Here, we used X-ray nanotomography and X-ray fluorescence microscopy to reveal the three-dimensional (3D) morphology and elemental distribution within materials. Focusing on nanoporous stainless steel, we evaluated the 3D morphology of the dealloying front and established a quantitative processing-structure-property relationship at a later stage of dealloying.
View Article and Find Full Text PDFEdge-illumination x-ray phase contrast imaging (EI XPCI) is a non-interferometric phase-sensitive method where two absorption masks are employed. These masks are fabricated through a photolithography process followed by electroplating which is challenging in terms of yield as well as time- and cost-effectiveness. We report on the first implementation of EI XPCI with Pt-based metallic glass masks fabricated by an imprinting method.
View Article and Find Full Text PDFJ Biomed Mater Res B Appl Biomater
November 2017
The aim of this study was to investigate and compare the surface characteristics and initial bioactivity of ceria-stabilized zirconia/alumina nanocomposite (NANOZR) with those of yttria-stabilized zirconia (3Y-TZP) and pure titanium (CpTi) following the use of three surface modification methods; polishing, sandblasting/acid-etching (SB-E) and electrochemical deoxidation (ECD). Physical properties including surface morphology, chemical composition, X-ray diffraction, surface wettability, surface roughness, and hardness were measured. Osteoblast-like MC3T3-E1 cells were used to examine cell morphology and attachment to the surfaces of the materials.
View Article and Find Full Text PDFThe mechanical properties of engineering materials are key for ensuring safety and reliability. However, the plastic deformation of BMGs is confined to narrow regions in shear bands, which usually result in limited ductilities and catastrophic failures at low homologous temperatures. The quasi-brittle failure and lack of tensile ductility undercut the potential applications of BMGs.
View Article and Find Full Text PDFWe synthesized freestanding bulk three-dimensional nanoporous Si using dealloying in a metallic melt, a top-down process. Using this nanoporous Si, we fabricated negative electrodes with high lithium capacity, nearing their theoretical limits, and greatly extended cycle lifetimes, considerably improving the battery performance compared with those using electrodes made from silicon nanoparticles. By operating the electrodes below the accommodation volume limit of their pores, we prolonged their cycle lifetime.
View Article and Find Full Text PDFThe dynamics of Pd-based metallic glass-forming liquids (Pd(40)Ni(10)Cu(30)P(20), Pd(42.5)Ni(7.5)Cu(30)P(20), Pd(40)Ni(40)P(20), and Pd(30)Ni(50)P(20)) was studied by mechanical spectroscopy and modulated differential scanning calorimetry (MDSC).
View Article and Find Full Text PDFBulk metallic glasses--formed by supercooling the liquid state of certain metallic alloys--have potentially superior mechanical properties to crystalline materials. Here, we report a Co(43)Fe(20)Ta(5.5)B(31.
View Article and Find Full Text PDF© LitMetric 2025. All rights reserved.