Effect of photofunctionalization on titanium bone-implant integration in ovariectomized rats.

Osteoporosis is considered a risk factor for osseointegration during implant treatment. Photofunctionalization of titanium has been shown to improve bone-based cell adhesion, proliferation, and functional expression, increasing the bone-implant contact rate and bone-implant integration strength. This study aimed to test the hypothesis that photofunctionalization is effective for implant fixation using an osteoporosis rat model.

Prosthodontic treatment can improve the ingestible food profile in Japanese adult outpatients.

Purpose: To investigate the effect of prosthodontic treatment on the ingestible food profile in adult Japanese outpatients, and to identify the related risk factors that can deteriorate the profile.

Methods: The participants were 277 outpatients who visited university-based specialty clinics in Japan for prosthodontic treatment. The demographic data, number of present teeth assessed via intraoral examination, and oral health-related quality of life assessed by the total Oral Health Impact Profile (OHIP-J54) scores of all participants were recorded before treatment.

In vitro evaluation of NaOCl-mediated functionalization of biologically aged titanium surfaces.

The aim of this study was to evaluate the NaOCl-mediated biofunctionalization of titanium surfaces. Titanium disks stored for 2 weeks were immersed in 5% NaOCl solution for 24 h. A disk immersed in distilled water for 24 h was used as a control.

Usefulness of the newly developed artificial denture plaque for practical denture care training.

Objectives: The aim of this study was to investigate whether the newly developed artificial dental plaque (A-DP) is useful as an educational tool for denture care of dental hygienist that compared it with conventional artificial dental plaque from the viewpoint of practical skills.

Material And Methods: The 125 dental hygienist school students and 26 dental hygienists who had clinical experience were subjected a practical training of denture plaque control using the conventional denture plaque (C-DP) and the A-DP. The questionnaires based on the semantic differential method were used to survey whether the A-DP is similar to the real denture plaque (R-DP).

Chemical modification of pure titanium surfaces to enhance the cytocompatibility and differentiation of human mesenchymal stem cells.

The aim of this study was to improve the cytocompatibility and differentiation of human bone marrow-derived mesenchymal stem cells on the surface of titanium implants by immobilizing biofunctional molecules on their surface. Gly-Arg-Gly-Asp-Ser (GRGDS) peptides, human plasma fibronectin (pFN), or type I collagen from calf skin (Col) was covalently immobilized on the titanium surfaces. Twice as many cells attached to the Col- and pFN-immobilized titanium surfaces than attached to the as-polished surface control.

A multi-centered epidemiological study evaluating the validity of the treatment difficulty indices developed by the Japan Prosthodontic Society.

Purpose: The Japan Prosthodontic Society developed a multi-axis assessment protocol to evaluate the complex variations in patients who need prosthodontic care, and to classify the level of treatment difficulty. A previous report found the protocol to be sufficiently reliable. The purpose of this multi-center cohort study was to evaluate the validity of this multi-axis assessment protocol.

Reliability and validity of the patient disability-oriented diagnostic nomenclature system for prosthetic dentistry.

Purpose: The Japan Prosthodontic Society (JPS) has proposed a new diagnostic nomenclature system (DNS), based on pathogenesis and etiology, to facilitate and improve prosthodontic treatment. This system specifies patient disability and the causative factor (i.e.

Japan Prosthodontic Society position paper on "occlusal discomfort syndrome".

Purpose: Dentists may encounter patients who present with a sense of a malocclusion but in whom no objective findings can be detected. For the patient who insists that there is occlusal discomfort, in the absence of evidence some dentists elect to perform an occlusal adjustment that not only fails to alleviate symptoms, and may, in fact, exacerbate the discomfort. The patient-dentist relationship is then likely compromised because of a lack of trust.

NaOCl-mediated biofunctionalization enhances bone-titanium integration.

The aim of this study was to examine the effect of NaOCl pretreatment on the biomechanical fixation of implant at the early healing stage of a rat model. Polished titanium cylindrical implants and disks were prepared, and one-half of these samples were dual acidetched. Then, one-half of both surfaces were chemically-cleaned by pretreatment with 5% NaOCl solution for 24 h.

Clinical application of removable partial dentures using thermoplastic resin. Part II: Material properties and clinical features of non-metal clasp dentures.

This position paper reviews physical and mechanical properties of thermoplastic resin used for non-metal clasp dentures, and describes feature of each thermoplastic resin in clinical application of non-metal clasp dentures and complications based on clinical experience of expert panels. Since products of thermoplastic resin have great variability in physical and mechanical properties, clinicians should utilize them with careful consideration of the specific properties of each product. In general, thermoplastic resin has lower color-stability and higher risk for fracture than polymethyl methacrylate.

Photofunctionalization increases the bioactivity and osteoconductivity of the titanium alloy Ti6Al4V.

This study examined the effect of photofunctionalization on bioactivity and osteoconductivity of titanium alloy Ti6Al4V. We also tested a hypothesis that the effect of photofunctionalization is as substantial as the one of surface roughening. Two different surface morphology, a roughened surface (sandblasted and acid-etched surface) and relatively smooth surface (machined surface), was tested.

Synergistic effects of UV photofunctionalization and micro-nano hybrid topography on the biological properties of titanium.

Titanium surfaces with micro-nano hybrid topography (nanoscale nodules in microscale pits) have been recently demonstrated to show higher biological capability than those with microtopography alone. On the other hand, UV treatment of titanium surfaces, which is called UV photofunctionalization, has recently been introduced to substantially increase the biological capability and osteoconductivity of titanium surfaces. However, synergistic effects of these two advanced surface modification technologies and regulatory factors to potentially modulate the mutual effects have never been addressed.

Ultraviolet light treatment for the restoration of age-related degradation of titanium bioactivity.

Purpose: To examine the bioactivity of differently aged titanium (Ti) disks and to determine whether ultraviolet (UV) light treatment reverses the possible adverse effects of Ti aging.

Materials And Methods: Ti disks with three different surface topographies were prepared: machined, acid-etched, and sandblasted. The disks were divided into three groups: disks tested for biologic capacity immediately after processing (fresh surfaces), disks stored under dark ambient conditions for 4 weeks, and disks stored for 4 weeks and treated with UV light.

Cellular behavior on TiO2 nanonodular structures in a micro-to-nanoscale hierarchy model.

Biological tissues involve hierarchical organizations of structures and components. We created a micropit-and-nanonodule hybrid topography of TiO(2) by applying a recently reported nanonodular self-assembly technique on acid-etch-created micropit titanium surfaces. The size of the nanonodules was controllable by changing the assembly time.

Ultraviolet light-mediated photofunctionalization of titanium to promote human mesenchymal stem cell migration, attachment, proliferation and differentiation.

Improving the osteoconductive potential of titanium implants has been of continuing interest in the fields of dentistry and orthopedic surgery. This study determined the bioactivity of ultraviolet (UV) light-treated titanium. Human mesenchymal stem cells (MSCs) were cultured on acid-etched microtopographical titanium surfaces with and without 48h pretreatment with UVA (peak wavelength of 360n m) or UVC (peak wavelength of 250 nm).

N-acetyl cysteine (NAC)-mediated detoxification and functionalization of poly(methyl methacrylate) bone cement.

Currently used poly(methyl methacrylate) (PMMA)-based bone cement lacks osteoconductivity and induces osteolysis and implant loosening due to its cellular and tissue-toxicity. A high percentage of revision surgery following the use of bone cement has become a significant universal problem. This study determined whether incorporation of the amino acid derivative N-acetyl cysteine (NAC) in bone cement reduces its cytotoxicity and adds osteoconductivity to the material.

N-acetyl cysteine prevents polymethyl methacrylate bone cement extract-induced cell death and functional suppression of rat primary osteoblasts.

This study examines the cytotoxicity of bone cement extract to osteoblasts and the potential detoxification and restoration of osteoblastic function by an antioxidant amino acid, N-acetyl cysteine (NAC). The osteoblastic cells derived from rat femurs were cultured with extract from polymethyl methacrylate (PMMA)-based bone cement. The calcein and ethidium homodimer staining of the cells after 24-h incubation showed that 23.

The effect of ultraviolet functionalization of titanium on integration with bone.

Titanium implants are used as a reconstructive anchor in orthopedic and dental diseases and problems. Recently, ultraviolet (UV) light-induced photocatalytic activity of titanium has earned considerable and broad interest in environmental and clean-energy sciences. This study determines whether UV treatment of titanium enhances its osteoconductive capacity.

Glycosaminoglycan degradation reduces mineralized tissue-titanium interfacial strength.

Although the localization of the proteoglycan/glycosaminoglycan (GAG) complex at the bone-titanium implant interface has been implied, the role of proteoglycans on the establishment of bone-titanium integration is unknown. The hypothesis to be tested was that proteoglycans play an important role in establishing bone-titanium interfacial adhesion. The objective of this study is to investigate the effect of proteoglycan knockdown by GAG enzymatic degradation on the interfacial strength between mineralized tissue and titanium having different surface topographies.

Osteoblasts generate harder, stiffer, and more delamination-resistant mineralized tissue on titanium than on polystyrene, associated with distinct tissue micro- and ultrastructure.

Unlabelled: This study revealed that osteoblasts generate harder, stiffer, and more delamination-resistant mineralized tissue on titanium than on the tissue culture polystyrene, associated with modulated gene expression, uniform mineralization, well-crystallized interfacial calcium-phosphate layer, and intensive collagen deposition. Knowledge of this titanium-induced alteration of osteogenic potential leading to enhanced intrinsic biomechanical properties of mineralized tissue provides novel opportunities and implications for understanding and improving bone-titanium integration and engineering physiomechanically tolerant bone.

Introduction: Bone-titanium integration is a biological phenomenon characterized by continuous generation and preservation of peri-implant bone and serves as endosseous anchors against endogenous and exogenous loading, of which mechanisms are poorly understood.

Enhanced mineralized tissue adhesion to titanium over polystyrene assessed by the nano-scratch test.

The critical load determined by the scratch test is regarded to be a representative measure of coating adhesion in the field of engineering. This study aimed to evaluate the method for its usefulness for assessing the mineralized tissue-titanium interface strength. Osteoblastic cells derived from rat bone marrow were cultured on polystyrene, titanium-coated polystyrene, and titanium disks with either a machined or dual-acid etched surface.