Structure-property relationships to direct the dynamic properties of acylsemicarbazide-based materials.

Secondary interactions, such as hydrogen bonding or phase separation, can enhance the stability of dynamic covalent materials without compromising on desired dynamic properties. Here, we investigate the combination of multiple secondary interactions in dynamic covalent materials based on acylsemicarbazides (ASCs), with the aim of achieving tunable material properties. The effects of different ASC substituents on the dynamic covalent and hydrogen bonding capabilities were investigated in a small molecule study using a combined experimental and theoretical approach, and revealed the presence of cooperative hydrogen-bonding interactions in 2 directions in one of the derivatives.

Supramolecular Polymer Additives as Repairable Reinforcements for Dynamic Covalent Networks.

Employing rigid (in)organic materials as reinforcement for dynamic covalent networks (DCNs) is an effective approach to develop high-performance materials. Yet, recycling of these materials after failure often necessitates inefficient chemical reprocessing or inevitably alters their performance due to unrepairable inert components. Here, a non-covalent reinforcement strategy is presented by introducing a supramolecular additive to a DCN that can reversibly depolymerize and reform on demand, therefore acting as an adaptive and repairable reinforcement.

The Effect of Macromonomer Surfactant Microstructure on Aqueous Polymer Dispersion and Derived Polymer Film Properties.

Water-borne coatings were prepared from poly(methyl methacrylate--butyl acrylate) latexes using different methacrylic acid containing macromonomers as stabilizers, and their physical properties were determined. The amphiphilic methacrylic acid macromonomers containing methyl, butyl, or lauryl methacrylate as hydrophobic comonomers were synthesized via catalytic chain transfer polymerization to give stabilizers with varying architecture, composition, and molar mass. A range of latexes of virtually the same composition was prepared by keeping the content of methacrylic acid groups during the emulsion polymerization constant and by only varying the microstructure of the macromonomers.

RNA-inspired phosphate diester dynamic covalent networks.

Neighboring group assisted rearrangement substantially increases relaxation rates in dynamic covalent networks, allowing easier (re)processing of these materials. In this work, we introduce a dynamic covalent network with anionic phosphate diesters as the sole dynamic group, incorporating β-hydroxy groups as a neighboring group, mimicking the self-cleaving backbone structure of RNA. The diester-based networks have slightly slower dynamics, but significantly better hydrolytic (and thermal) stability than analogous phosphate triester-based networks.

Benzene Tetraamide: A Covalent Supramolecular Dual Motif in Dynamic Covalent Polymer Networks.

In dynamic polyamide networks, 1,2,4,5-benzene tetraamide (B4A) units act simultaneously as a dynamic covalent cross-linker and as supramolecular stacking motif. This results in materials with a rubbery plateau modulus that is about 20 times higher than that of a corresponding reference network in which the supramolecular interaction is suppressed. In branched polyamides with the same B4A dynamic motif, hydrogen bonding and stacking lead to strong and reversible supramolecular networks, whereas a branched polyamide with the nonstacking reference linker is a viscous liquid under the same conditions.

Current Challenges and Opportunities of Photodynamic Therapy against Cancer.

Background: Photodynamic therapy (PDT) is an established, minimally invasive treatment for specific types of cancer. During PDT, reactive oxygen species (ROS) are generated that ultimately induce cell death and disruption of the tumor area. Moreover, PDT can result in damage to the tumor vasculature and induce the release and/or exposure of damage-associated molecular patterns (DAMPs) that may initiate an antitumor immune response.

Quantification of Lipid and Peptide Content in Antigenic Peptide-loaded Liposome Formulations by Reversed-phase UPLC using UV Absorbance and Evaporative Light Scattering Detection.

Antigenic peptide-loaded cationic liposomes have shown promise as cancer vaccines. Quantification of both peptides and lipids is critical for quality control of such vaccines for clinical translation. In this work we describe a reversed phase ultra-performance liquid chromatography (RP-UPLC) method that separates lipids (DOTAP, DOPC and their degradation products) and two physicochemically different peptides within 12 min.

Dynamic Polyamide Networks via Amide-Imide Exchange.

The diamide-imide equilibrium was successfully exploited for the synthesis of dynamic covalent polymer networks in which a dissociative bond exchange mechanism leads to high processibility at temperatures above ≈110 °C. Dynamic covalent networks bridge the gap between thermosets and thermoplastic polymers. At the operating temperature, when the network is fixed, dynamic covalent networks are elastic solids, while at high temperatures, chemical exchange reactions turn the network into a processible viscoelastic material.

Flower-Like Colloidal Particles through Precipitation Polymerization of Redox-Responsive Liquid Crystals.

We report on the synthesis of monodisperse, flower-like, liquid crystalline (LC) polymer particles by precipitation polymerization of a LC mixture consisting of benzoic acid-functionalized acrylates and disulfide-functionalized diacrylates. Introduction of a minor amount of redox-responsive disulfide-functionalized diacrylates (≤10 wt %) induced the formation of flower-like shapes. The shape of the particles can be tuned from flower- to disk-like to spherical by elevating the polymerization temperature.

Efficient Exchange in a Bioinspired Dynamic Covalent Polymer Network via a Cyclic Phosphate Triester Intermediate.

Bond exchange via neighboring group-assisted reactions in dynamic covalent networks results in efficient mechanical relaxation. In Nature, the high reactivity of RNA toward nucleophilic substitution is largely attributed to the formation of a cyclic phosphate ester intermediate via neighboring group participation. We took inspiration from RNA to develop a dynamic covalent network based on β-hydroxyl-mediated transesterifications of hydroxyethyl phosphate triesters.

Liquid-Crystalline Polymer Particles Prepared by Classical Polymerization Techniques.

Liquid-crystalline polymer particles prepared by classical polymerization techniques are receiving increased attention as promising candidates for use in a variety of applications including micro-actuators, structurally colored objects, and absorbents. These particles have anisotropic molecular order and liquid-crystalline phases that distinguish them from conventional polymer particles. In this minireview, the preparation of liquid-crystalline polymer particles from classical suspension, (mini-)emulsion, dispersion, and precipitation polymerization reactions are discussed.

Monodisperse Liquid Crystalline Polymer Shells with Programmable Alignment and Shape Prepared by Seeded Dispersion Polymerization.

Monodisperse, micrometer-sized liquid crystalline (LC) shells are prepared by seeded dispersion polymerization. After polymerizing LC monomer mixtures in the presence of non-crosslinked polymer seeds, hollow LC polymer shells with programmable alignment and shape are prepared by removing the seeds. The LC alignment in the LC polymer shells can be easily manipulated by the polymer seeds, as a radial alignment is observed with amorphous poly(phenyl methacrylate) seeds and a bipolar alignment is observed with bipolar LC polymer seeds.

Cationic Nanoparticle-Based Cancer Vaccines.

Cationic nanoparticles have been shown to be surprisingly effective as cancer vaccine vehicles in preclinical and clinical studies. Cationic nanoparticles deliver tumor-associated antigens to dendritic cells and induce immune activation, resulting in strong antigen-specific cellular immune responses, as shown for a wide variety of vaccine candidates. In this review, we discuss the relation between the cationic nature of nanoparticles and the efficacy of cancer immunotherapy.

Pyranine Based Ion-Paired Complex as a Mechanophore in Polyurethanes.

A new mechanophore for polyurethane thermoplastic elastomers based on ion-paired complexes is developed. 8-(2-hydroxyethoxy)pyrene-1,3,6-trisulfonate (HEPTS) is incorporated into polyurethanes as an end-capper and aggregates in apolar media. Aggregation of the ionic HEPTS end groups in solution depends on concentration solvent polarity.

Phosphate Triester Dynamic Covalent Networks.

Dynamic covalent networks are a class of polymeric materials that combine the merits of classical thermosets and thermoplastics, in terms of mechanical properties and reprocessability, in one material. Various dynamic covalent chemistries have thus been implemented in polymeric materials with recent interests shifting toward chemistries that would allow rearrangements in network topology without the aid of external catalysts. Here we introduce transesterification in phosphate triesters as a new dynamic covalent chemistry in polymeric networks.

Simplified Monopalmitoyl Toll-like Receptor 2 Ligand Mini-UPam for Self-Adjuvanting Neoantigen-Based Synthetic Cancer Vaccines.

Synthetic vaccines, based on antigenic peptides that comprise MHC-I and MHC-II T-cell epitopes expressed by tumors, show great promise for the immunotherapy of cancer. For optimal immunogenicity, the synthetic peptides (SPs) should be adjuvanted with suitable immunostimulatory additives. Previously, we have shown that improved immunogenicity in vivo is obtained with vaccine modalities in which an SP is covalently connected to an adjuvanting moiety, typically a ligand to Toll-like receptor 2 (TLR2).

Programmable liquid crystal elastomer microactuators prepared via thiol-ene dispersion polymerization.

Narrowly dispersed, 10 micron-sized, liquid crystalline elastomer polymer actuators were first prepared via thiol-ene dispersion polymerization and then embedded and stretched in a polyvinyl alcohol film, followed by photopolymerization of the residual acrylate groups. Prolate micro spheroids in which the mesogens are aligned parallel to the long axis were obtained and showed reversible thermally driven actuation owing to nematic to isotropic transition of the liquid crystal molecules. The particles were also compressed to form disk-shaped oblate microactuators in which the mesogens are aligned perpendicular to the short axis, demonstrating that the reported method is a versatile method to fabricate liquid crystal elastomer microactuators with programmable properties.

Intramolecularly Catalyzed Dynamic Polyester Networks Using Neighboring Carboxylic and Sulfonic Acid Groups.

Dynamic covalent bonds in a polymer network lead to plasticity, reshapability, and potential recyclability at elevated temperatures in combination with solvent-resistance and better dimensional stability at lower temperatures. Here we report a simple one-step procedure for the catalyst-free preparation and intramolecularly catalyzed stress-relaxation of dynamic polyester networks. The procedure is based on the coupling of branched OH-end functional polyesters (functionality ≥ 3) by pyromellitic dianhydride (PMDA) or 2,5-bis(methoxy-carbonyl) benzenesulfonic acid resulting in ester linkages with, respectively, a COOH or a SOH group in a position to the ester bond.

Morphology Control of Liposome - RAFT Oligomer Precursors to Complex Polymer Nanostructures.

Different types of butyl acrylate (BA)--acrylic acid (AA) oligomers were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization and mixed with extruded 200 nm dimethyldioctadecylammonium bromide vesicles. The resulting precursor structures form the basis for subsequent vesicle-templated polymerizations. Systematic variations in temperature, pH, oligomer length, and oligomer composition and their effects on precursor morphology were studied.

Monodisperse Liquid Crystal Network Particles Synthesized via Precipitation Polymerization.

The production of liquid crystalline (LC) polymer particles with a narrow size distribution on a large scale remains a challenge. Here, we report the preparation of monodisperse, cross-linked liquid crystalline particles via precipitation polymerization. This versatile and scalable method yields polymer particles with a smectic liquid crystal order.

Polypeptide Nanoparticles Obtained from Emulsion Polymerization of Amino Acid -Carboxyanhydrides.

Polypeptide nanoparticles were obtained by the miniemulsion polymerization of -(-nitrobenzyl)-l-cysteine (NBC) -carboxyanhydride (NCA). Through process optimization, reaction conditions were identified that allowed the polymerization of the water sensitive NCA to yield nanoparticles of about 220 nm size. Subsequent UV-irradiation of the nanoparticle emulsions caused the removal of the nitrobenzyl group and particle cross-linking through disulfide bond formation accompanied by the shrinkage of the particles.

Cationic Liposomes: A Flexible Vaccine Delivery System for Physicochemically Diverse Antigenic Peptides.

Purpose: Personalized peptide-based cancer vaccines will be composed of multiple patient specific synthetic long peptides (SLPs) which may have various physicochemical properties. To formulate such SLPs, a flexible vaccine delivery system is required. We studied whether cationic liposomes are suitable for this purpose.

In Situ Network Formation in PBT Vitrimers via Processing-Induced Deprotection Chemistry.

Although the network dynamics and mechanical properties of poly(butylene terephthalate) vitrimers can to some extent be controlled via chemical and physical approaches, it remains a challenge to be able to process PBT vitrimers with the same processing conditions via, for example, injection molding as neat PBT. Here, it is shown that the use of protected pentaerythritol as a latent cross-linker and the use of a Zn(II) transesterification catalyst allows for the in situ dynamic network formation in PBT during processing, with a delayed onset of gelation. This process can be controlled by adjusting the processing temperature, (protected) cross-linker content, and the type of protection group.

Biodegradable multi-walled carbon nanotubes trigger anti-tumoral effects.

Carbon nanotubes are of huge biotechnological interest because they can penetrate most biological barriers and, inside cells, can biomimetically interact with the cytoskeletal filaments, triggering anti-proliferative and cytotoxic effects in highly dividing cells. Unfortunately, their intrinsic properties and bio-persistence represent a putative hazard that relapses their application as therapies against cancer. Here we investigate mild oxidation treatments to improve the intracellular enzymatic digestion of MWCNTs, but preserving their morphology, responsible for their intrinsic cytotoxic properties.

Hollow microneedle-mediated micro-injections of a liposomal HPV E7 synthetic long peptide vaccine for efficient induction of cytotoxic and T-helper responses.

Recent studies have shown that intradermal vaccination has great potential for T cell-mediated cancer immunotherapy. However, classical intradermal immunization with a hypodermic needle and syringe has several drawbacks. Therefore, in the present study a digitally controlled hollow microneedle injection system (DC-hMN-iSystem) with an ultra-low dead volume was developed to perform micro-injections (0.