Functionalization of three-dimensional epitaxial graphene with metal nanoparticles.

We demonstrate the first successful functionalization of epitaxial three-dimensional graphene with metal nanoparticles. The functionalization is obtained by immersing three-dimensional graphene in a nanoparticle colloidal solution. This method is versatile and demonstrated here for gold and palladium, but can be extended to other types of nanoparticles.

Influence of an Overshoot Layer on the Morphological, Structural, Strain, and Transport Properties of InAs Quantum Wells.

InAs quantum wells (QWs) are promising material systems due to their small effective mass, narrow bandgap, strong spin-orbit coupling, large g-factor, and transparent interface to superconductors. Therefore, they are promising candidates for the implementation of topological superconducting states. Despite this potential, the growth of InAs QWs with high crystal quality and well-controlled morphology remains challenging.

Josephson Diode Effect in High-Mobility InSb Nanoflags.

We report nonreciprocal dissipation-less transport in single ballistic InSb nanoflag Josephson junctions. Applying an in-plane magnetic field, we observe an inequality in supercurrent for the two opposite current propagation directions. Thus, these devices can work as Josephson diodes, with dissipation-less current flowing in only one direction.

Correction: Covalent organic functionalization of graphene nanosheets and reduced graphene oxide 1,3-dipolar cycloaddition of azomethine ylide.

[This corrects the article DOI: 10.1039/D1NA00335F.].

Covalent organic functionalization of graphene nanosheets and reduced graphene oxide 1,3-dipolar cycloaddition of azomethine ylide.

Organic functionalization of graphene is successfully performed 1,3-dipolar cycloaddition of azomethine ylide in the liquid phase. The comparison between 1-methyl-2-pyrrolidinone and ,-dimethylformamide as dispersant solvents, and between sonication and homogenization as dispersion techniques, proves ,-dimethylformamide and homogenization as the most effective choice. The functionalization of graphene nanosheets and reduced graphene oxide is confirmed using different techniques.

Evidence of Josephson Coupling in a Few-Layer Black Phosphorus Planar Josephson Junction.

Setting up strong Josephson coupling in van der Waals materials in close proximity to superconductors offers several opportunities both to inspect fundamental physics and to develop cryogenic quantum technologies. Here we show evidence of Josephson coupling in a planar few-layer black phosphorus junction. The planar geometry allows us to probe the junction behavior by means of external gates, at different carrier concentrations.

High-Mobility Free-Standing InSb Nanoflags Grown on InP Nanowire Stems for Quantum Devices.

High-quality heteroepitaxial two-dimensional (2D) InSb layers are very difficult to realize because of the large lattice mismatch with other widespread semiconductor substrates. A way around this problem is to grow free-standing 2D InSb nanostructures on nanowire (NW) stems, thanks to the capability of NWs to efficiently relax elastic strain along the sidewalls when lattice-mismatched semiconductor systems are integrated. In this work, we optimize the morphology of free-standing 2D InSb nanoflags (NFs).

Ohmic contact engineering in few-layer black phosphorus: approaching the quantum limit.

Achieving good quality Ohmic contacts to van der Waals materials is a challenge, since at the interface between metal and van der Waals material different conditions can occur, ranging from the presence of a large energy barrier between the two materials to the metallization of the layered material below the contacts. In black phosphorus (bP), a further challenge is its high reactivity to oxygen and moisture, since the presence of uncontrolled oxidation can substantially change the behavior of the contacts. Here we study three of the most commonly used metals as contacts to bP, chromium, titanium, and nickel, and investigate their influence on contact resistance against the variability between different flakes and different samples.

Enhanced ambient stability of exfoliated black phosphorus by passivation with nickel nanoparticles.

Since its discovery, the environmental instability of exfoliated black phosphorus (2D bP) has emerged as a challenge that hampers its wide application in chemistry, physics, and materials science. Many studies have been carried out to overcome this drawback. Here we show a relevant enhancement of ambient stability in few-layer bP decorated with nickel nanoparticles as compared to pristine bP.

Black Phosphorus/Palladium Nanohybrid: Unraveling the Nature of P-Pd Interaction and Application in Selective Hydrogenation.

The burgeoning interest in two-dimensional (2D) black phosphorus (bP) contributes to the expansion of its applications in numerous fields. In the present study, 2D bP is used as a support for homogeneously dispersed palladium nanoparticles directly grown on it by a wet chemical process. Electron energy loss spectroscopy-scanning transmission electron microscopy analysis evidences a strong interaction between palladium and P atoms of the bP nanosheets.

A Perspective on Recent Advances in Phosphorene Functionalization and Its Applications in Devices.

Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in materials science. The physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis.

Polymer-Based Black Phosphorus (bP) Hybrid Materials by in Situ Radical Polymerization: An Effective Tool To Exfoliate bP and Stabilize bP Nanoflakes.

Black phosphorus (bP) has been recently investigated for next generation nanoelectronic multifunctional devices. However, the intrinsic instability of exfoliated bP (the bP nanoflakes) toward both moisture and air has so far overshadowed its practical implementation. In order to contribute to fill this gap, we report here the preparation of new hybrid polymer-based materials where bP nanoflakes (bPn) exhibit a significantly improved stability.

A sensitive calorimetric technique to study energy (heat) exchange at the nano-scale.

Every time a chemical reaction occurs, an energy exchange between reactants and the environment takes place, which is defined as the enthalpy of the reaction. During the last few decades, research has resulted in an increasing number of devices at the micro- or nano-scale. Sensors, catalyzers, and energy storage systems are more and more developed as nano-devices which represent the building blocks for commercial "macroscopic" objects.

Hybrid nanocomposites of 2D black phosphorus nanosheets encapsulated in PMMA polymer material: new platforms for advanced device fabrication.

Hybrid materials, containing a 2D filler embedded in a polymeric matrix, are an interesting platform for several applications, because of the variety of properties that the filler can impart to the polymer matrix when dispersed at the nanoscale. Moreover, novel properties could arise from the interaction between the two. Mostly the bulk properties of these materials have been studied so far, especially focusing on how the filler changes the polymeric matrix properties.

Decoration of exfoliated black phosphorus with nickel nanoparticles and its application in catalysis.

Nickel nanoparticles were dispersed on the surface of exfoliated black phosphorus and the resulting nanohybrid Ni/2DBP showed an improved stability with respect to pristine 2D BP when kept under ambient conditions in the dark. Ni/2DBP was applied as a catalyst in the semihydrogenation of phenylacetylene and exhibited high conversion and selectivity towards styrene. These features were preserved after recycling tests revealing the high stability of the nanohybrid.

Heterogeneous nucleation of catalyst-free InAs nanowires on silicon.

We report on the heterogeneous nucleation of catalyst-free InAs nanowires on Si(111) substrates by chemical beam epitaxy. We show that nanowire nucleation is enhanced by sputtering the silicon substrate with energetic particles. We argue that particle bombardment introduces lattice defects on the silicon surface that serve as preferential nucleation sites.

Quantitation of PET signal as an adjunct to visual interpretation of florbetapir imaging.

Purpose: This study examined the feasibility of using quantitation to augment interpretation of florbetapir PET amyloid imaging.

Methods: A total of 80 physician readers were trained on quantitation of florbetapir PET images and the principles for using quantitation to augment a visual read. On day 1, the readers completed a visual read of 96 scans (46 autopsy-verified and 50 from patients seeking a diagnosis).

Bistability in a Driven-Dissipative Superfluid.

We experimentally study a driven-dissipative Josephson junction array, realized with a weakly interacting Bose-Einstein condensate residing in a one-dimensional optical lattice. Engineered losses on one site act as a local dissipative process, while tunneling from the neighboring sites constitutes the driving force. We characterize the emerging steady states of this atomtronic device.

The Role of Water in the Preparation and Stabilization of High-Quality Phosphorene Flakes.

is shown to be degraded by water. However, the presence of a small amount of water allows the synthesis of high-quality material in liquid exfoliation of black phosphorus using dimethylsulfoxide as solvent. A phosphorus/water molar ratio between 1.

Negative Differential Conductivity in an Interacting Quantum Gas.

We report on the observation of negative differential conductivity (NDC) in a quantum transport device for neutral atoms employing a multimode tunneling junction. The system is realized with a Bose-Einstein condensate loaded in a one-dimensional optical lattice with high site occupancy. We induce an initial difference in chemical potential at one site by local atom removal.

Efficient near-UV emitters based on cationic bis-pincer iridium(III) carbene complexes.

We report on the photophysical studies of two cationic near-UV emitters based on bis-pincer Ir(III) carbene complexes: [Ir(nBu)(C(NHC)(Me)CC(NHC))2]X, where Ir(nBu)(C(NHC)(Me)CC(NHC)) is (4,6-dimethyl-1,3-phenylene-κC(2))bis(1-butylimidazol-2-ylidene) and X = I(-) or PF6(-)). The compounds are highly emitting in deaerated CH3CN solution with emission maxima at 384 and 406 nm, and photoluminescence quantum yields of 0.41 and 0.

Imaging fractional incompressible stripes in integer quantum Hall systems.

Transport experiments provide conflicting evidence on the possible existence of fractional order within integer quantum Hall systems. In fact, integer edge states sometimes behave as monolithic objects with no inner structure, while other experiments clearly highlight the role of fractional substructures. Recently developed low-temperature scanning probe techniques offer today an opportunity for a deeper-than-ever investigation of spatial features of such edge systems.

Large-area ohmic top contact to vertically grown nanowires using a free-standing Au microplate electrode.

A method of electrically contacting vertically grown nanowires of uneven heights, a common scenario among as-grown nanowires, is reported here using a chemically synthesized single-crystalline Au microplate as top electrode. The contact is electrically activated and the contact formation is predominantly due to electromigration. With this approach, the electrode could ohmically contact several thousand nanowires at once.

Probing the gate--voltage-dependent surface potential of individual InAs nanowires using random telegraph signals.

We report a novel method for probing the gate-voltage dependence of the surface potential of individual semiconductor nanowires. The statistics of electronic occupation of a single defect on the surface of the nanowire, determined from a random telegraph signal, is used as a measure for the local potential. The method is demonstrated for the case of one or two switching defects in indium arsenide (InAs) nanowire field effect transistors at temperatures T=25-77 K.