On-Site Purification of Copper-Contaminated Vanadium Electrolytes by using a Vanadium Redox Flow Battery.

Corrosion of carbon-based electrodes and bipolar plates is a major hurdle and can be a cause of failure in commercial vanadium redox flow batteries (VRFBs). Carbon corrosion was found to occur in a commercial VRFB (10 kW/40 kWh), whereby cracks through bipolar plates enabled the electrolyte to leach the copper current collectors at the end of the stacks, contaminating the entire electrolyte solution. In this work, the effects of copper contaminants on the operation of a VRFB were studied.

Polymer-Brush-Templated Three-Dimensional Molybdenum Sulfide Catalyst for Hydrogen Evolution.

Earth-abundant hydrogen evolution catalysts are essential for high-efficiency solar-driven water splitting. Although a significant amount of studies have been dedicated to the development of new catalytic materials, the microscopic assembly of these materials has not been widely investigated. Here, we describe an approach to control the three-dimensional (3D) assembly of amorphous molybdenum sulfide using polymer brushes as a template.

Mediated water electrolysis in biphasic systems.

The concept of efficient electrolysis by linking photoelectrochemical biphasic H evolution and water oxidation processes in the cathodic and anodic compartments of an H-cell, respectively, is introduced. Overpotentials at the cathode and anode are minimised by incorporating light-driven elements into both biphasic reactions. The concepts viability is demonstrated by electrochemical H production from water splitting utilising a polarised water-organic interface in the cathodic compartment of a prototype H-cell.

Boosting water oxidation layer-by-layer.

Electrocatalysis of water oxidation was achieved using fluorinated tin oxide (FTO) electrodes modified with layer-by-layer deposited films consisting of bilayers of negatively charged citrate-stabilized IrO2 NPs and positively charged poly(diallyldimethylammonium chloride) (PDDA) polymer. The IrO2 NP surface coverage can be fine-tuned by controlling the number of bilayers. The IrO2 NP films were amorphous, with the NPs therein being well-dispersed and retaining their as-synthesized shape and sizes.

Redox Flow Batteries, Hydrogen and Distributed Storage.

Social, economic, and political pressures are causing a shift in the global energy mix, with a preference toward renewable energy sources. In order to realize widespread implementation of these resources, large-scale storage of renewable energy is needed. Among the proposed energy storage technologies, redox flow batteries offer many unique advantages.

Catalysis of water oxidation in acetonitrile by iridium oxide nanoparticles.

Water oxidation catalysed by iridium oxide nanoparticles (IrO NPs) in water-acetonitrile mixtures using [Ru(bpy)] as oxidant was studied as a function of the water content, the acidity of the reaction media and the catalyst concentration. It was observed that under acidic conditions (HClO) and at high water contents (80% (v/v)) the reaction is slow, but its rate increases as the water content decreases, reaching a maximum at approximately equimolar proportions (≈25% HO (v/v)). The results can be rationalized based on the structure of water in water-acetonitrile mixtures.

Evidence from in situ X-ray absorption spectroscopy for the involvement of terminal disulfide in the reduction of protons by an amorphous molybdenum sulfide electrocatalyst.

The reduction of protons into dihydrogen is important because of its potential use in a wide range of energy applications. The preparation of efficient and cheap catalysts for this reaction is one of the issues that need to be tackled to allow the widespread use of hydrogen as an energy carrier. In this paper, we report the study of an amorphous molybdenum sulfide (MoSx) proton reducing electrocatalyst under functional conditions, using in situ X-ray absorption spectroscopy.

Gold metal liquid-like droplets.

Simple methods to self-assemble coatings and films encompassing nanoparticles are highly desirable in many practical scenarios, yet scarcely any examples of simple, robust approaches to coat macroscopic droplets with continuous, thick (multilayer), reflective and stable liquid nanoparticle films exist. Here, we introduce a facile and rapid one-step route to form films of reflective liquid-like gold that encase macroscopic droplets, and we denote these as gold metal liquid-like droplets (MeLLDs). The present approach takes advantage of the inherent self-assembly of gold nanoparticles at liquid-liquid interfaces and the increase in rates of nanoparticle aggregate trapping at the interface during emulsification.

Electrochemical reduction of CO2 in organic solvents catalyzed by MoO2.

MoO2 microparticles act as an active catalyst for the electrochemical reduction of CO2 in organic solvents such as acetonitrile and dimethylformamide. The catalytic activity and product selectivity depend on temperature and water content of the solvent.

Easily-prepared dinickel phosphide (Ni2P) nanoparticles as an efficient and robust electrocatalyst for hydrogen evolution.

Polydispersed dinickel phosphide (Ni2P) nanoparticles were synthesized by a simple and scalable solid-state reaction. These nanoparticles are an excellent and robust catalyst for the electrochemical hydrogen evolution reaction, operating in both acidic and basic solutions.

Hydrogen evolution from a copper(I) oxide photocathode coated with an amorphous molybdenum sulphide catalyst.

Concerns over climate change resulting from accumulation of anthropogenic carbon dioxide in the atmosphere and the uncertainty in the amount of recoverable fossil fuel reserves are driving forces for the development of renewable, carbon-neutral energy technologies. A promising clean solution is photoelectrochemical water splitting to produce hydrogen using abundant solar energy. Here we present a simple and scalable technique for the deposition of amorphous molybdenum sulphide films as hydrogen evolution catalyst onto protected copper(I) oxide films.

Revealing and accelerating slow electron transport in amorphous molybdenum sulphide particles for hydrogen evolution reaction.

Electrochemical impedance spectroscopy is used to identify a slow electron transport process in hydrogen evolution catalysed by amorphous molybdenum sulphides on glassy carbon. A new chemical synthesis leads to an amorphous molybdenum sulfide catalyst with a higher electronic conductivity.

Photoinduced biphasic hydrogen evolution: decamethylosmocene as a light-driven electron donor.

Excitation of the weak electron donor decamethylosmocene on illumination with white light produces an excited-state species capable of reducing organically solubilized protons under biphasic conditions. Insight into the mechanism and kinetics of light-driven biphasic hydrogen evolution are obtained by analysis with gas chromatography, cyclic voltammetry, and UV/Vis and (1)H NMR spectroscopy. Formation of decamethylosmocenium hydride, which occurs prior to hydrogen evolution, is a rapid step relative to hydrogen release and takes place independently of light activation.

Low-cost industrially available molybdenum boride and carbide as "platinum-like" catalysts for the hydrogen evolution reaction in biphasic liquid systems.

Rarely reported low-cost molybdenum boride and carbide microparticles, both of which are available in abundant quantities due to their widespread use in industry, adsorb at aqueous acid-1,2-dichloroethane interfaces and efficiently catalyse the hydrogen evolution reaction in the presence of the organic electron donor - decamethylferrocene. Kinetic studies monitoring biphasic reactions by UV/vis spectroscopy, and further evidence provided by gas chromatography, highlight (a) their superior rates of catalysis relative to other industrially significant transition metal carbides and silicides, as well as a main group refractory compound, and (b) their highly comparable rates of catalysis to Pt microparticles of similar dimensions. Insight into the catalytic processes occurring for each adsorbed microparticle was obtained by voltammetry at the liquid-liquid interface.

Biphasic water splitting by osmocene.

The photochemical reactivity of osmocene in a biphasic water-organic solvent system has been investigated to probe its water splitting properties. The photoreduction of aqueous protons to hydrogen under anaerobic conditions induced by osmocene dissolved in 1,2-dichloroethane and the subsequent water splitting by the osmocenium metal-metal dimer formed during H(2) production were studied by electrochemical methods, UV-visible spectrometry, gas chromatography, and nuclear magnetic resonance spectroscopy. Density functional theory computations were used to validate the reaction pathways.

Hydrogen evolution at liquid-liquid interfaces.

Blowing bubbles: Hydrogen evolution by proton reduction with [(C(5)Me(5))(2)Fe] occurs at a soft interface between water and 1,2-dichloroethane (DCE). The reaction proceeds by proton transfer assisted by [(C(5)Me(5))(2)Fe] across the water-DCE interface with subsequent proton reduction in DCE. The interface essentially acts as a proton pump, allowing hydrogen evolution by directly using the aqueous proton.