Quantitative comparison of immunohistochemical HER2-low detection in an interlaboratory study.

Aims: Recently, human epidermal growth factor 2 (HER2)-low (i.e. HER2 score 1+ or 2+ without amplification) breast cancer patients became eligible for trastuzumab-deruxtecan treatment.

Considerable interlaboratory variation in PD-L1 positivity for head and neck squamous cell carcinoma in the Netherlands- A nationwide evaluation study.

Aims: Patients with recurrent or metastatic head and neck squamous cell carcinoma (HNSCC) are eligible for first-line immune checkpoint inhibition if their tumour is positive for programmed death ligand 1 (PD-L1) determined by the combined positive score (CPS). This nationwide study, using real-world data, investigated the developing PD-L1 testing landscape in the first 3 years after introduction of the test in HNSCC and examined interlaboratory variation in PD-L1 positivity rates.

Methods: Pathology reports of HNSCC patients mentioning PD-L1 were extracted from the Dutch Pathology Registry (Palga).

Advances in Membrane Separation for Biomaterial Dewatering.

Biomaterials often contain large quantities of water (50-98%), and with the current transition to a more biobased economy, drying these materials will become increasingly important. Contrary to the standard, thermodynamically inefficient chemical and thermal drying methods, dewatering by membrane separation will provide a sustainable and efficient alternative. However, biomaterials can easily foul membrane surfaces, which is detrimental to the performance of current membrane separations.

Aptamer Clicked Poly(ferrocenylsilanes) at Au Nanoparticles as Platforms with Multiple Function.

Aptamers are widely used in biosensing due to their specific sensitivity toward many targets. Thus, gold nanoparticle (AuNP) aptasensors are subject to intense research due to the complementary properties of aptamers as sensing elements and AuNPs as transducers. We present herein a novel method for the functional coupling of thrombin-specific aptamers to AuNPs via an anionic, redox-active poly(ferrocenylsilane) (PFS) polyelectroyte.

Polyester Brush Coatings for Circularity: Grafting, Degradation, and Repeated Growth.

Polymer brushes are widely used as versatile surface modifications. However, most of them are designed to be long-lasting by using nonbiodegradable materials. This generates additional plastic waste and hinders the reusability of substrates.

Bias in observational studies on the effectiveness of in hospital use of hydroxychloroquine in COVID-19.

Purpose: During the first waves of the coronavirus pandemic, evidence on potential effective treatments was urgently needed. Results from observational studies on the effectiveness of hydroxychloroquine (HCQ) were conflicting, potentially due to biases. We aimed to assess the quality of observational studies on HCQ and its relation to effect sizes.

Nonaqueous Interfacial Polymerization-Derived Polyphosphazene Films for Sieving or Blocking Hydrogen Gas.

A series of cyclomatrix polyphosphazene films have been prepared by nonaqueous interfacial polymerization (IP) of small aromatic hydroxyl compounds in a potassium hydroxide dimethylsulfoxide solution and hexachlorocyclotriphosphazene in cyclohexane on top of ceramic supports. Via the amount of dissolved potassium hydroxide, the extent of deprotonation of the aromatic hydroxyl compounds can be changed, in turn affecting the molecular structure and permselective properties of the thin polymer networks ranging from hydrogen/oxygen barriers to membranes with persisting hydrogen permselectivities at high temperatures. Barrier films are obtained with a high potassium hydroxide concentration, revealing permeabilities as low as 9.

What It Takes for Imidazolium Cations to Promote Electrochemical Reduction of CO.

Imidazolium cations enhance the performance of several electrodes in converting CO to CO in non-aqueous media. In this publication, we elucidate the origin of the function of imidazolium cations when exposed to Au electrodes in anhydrous acetonitrile in CO atmosphere. We demonstrate that imidazolium cations lead to unprecedentedly low overpotentials for CO reduction to CO on Au, with ∼100% Faradaic efficiency.

Inter-assay reliability of programmed cell death-ligand 1 in head and neck squamous cell carcinoma.

Objectives: The programmed cell death-ligand 1 (PD-L1) 22C3 pharmDx assay is used as a companion diagnostic test to select head and neck squamous cell carcinoma (HNSCC) patients that may benefit from treatment with the checkpoint inhibitor pembrolizumab. Because the Dako platform is not universally available, we studied the performance of a 22C3 laboratory developed test (LDT) performed on a Ventana BenchMark Ultra compared to the 22C3 pharmDx assay.

Materials And Methods: Serial sections from tissue micro arrays (TMAs) containing tumour tissue from 97 HNSCC patients were stained with the 22C3 pharmDx assay and 22C3 LDT.

Primary nonadherence to drugs prescribed by general practitioners: A Dutch database study.

Aim: Primary nonadherence (PNA) is defined as not filling the first prescription for a drug treatment. PNA can lead not only to poor patient outcomes but also to exposure misclassification in written prescription databases. This study aims to estimate PNA in primary care in the Netherlands and to investigate associated factors.

Drug exposure misclassification in pharmacoepidemiology: Sources and relative impact.

Background: Drug exposure assessment based on dispensing data can be misclassified when patients do not adhere to their therapy or when information about over-the-counter drugs is not captured in the study database. Previous research has considered hypothetical sensitivity and specificity values, whereas this study aims to assess the impact of literature-based real values of exposure misclassification.

Methods: A synthetic cohort study was constructed based on the proportion of exposure theoretically captured in a database (range 0.

Poly(aryl cyanurate)-Based Thin-Film Composite Nanofiltration Membranes.

The successful synthesis of poly(aryl cyanurate) nanofiltration membranes via the interfacial polymerization reaction between cyanuric chloride and 1,1,1-tris(4-hydroxyphenyl)ethane (TPE), atop a polyethersulfone ultrafiltration support, is demonstrated. The use of cyanuric chloride allows for the formation of a polymer that does not contain hydrolysis-susceptible amide bonds that inherently limit the stability of polyamide nanofiltration membranes. In order to achieve a thin defect-free cross-linked film via interfacial polymerization, a sufficient number of each monomer should react.

Impact of anticoagulant exposure misclassification on the bleeding risk of direct oral anticoagulants.

Aims: Drug exposure status based on routinely collected data might be misclassified when the database contains only prescriptions from 1 type of prescriber (e.g. general practitioner and not specialist).

Design of a Pharmacy Curriculum on Patient Centered Communication Skills.

For delivering high quality pharmaceutical care pharmacy students need to develop the competences for patient centered communication. The aim of the article is to describe how a curriculum on patient centered communication can be designed for a pharmacy program. General educational principles for curriculum design are based on the theories of constructive alignment, self-directed learning and the self-determination theory.

Swelling of Poly(methyl acrylate) Brushes in Acetone Vapor.

Sensor platforms can benefit from the incorporation of polymer brushes since brushes can concentrate the analyte near the sensor surface. Brushes that absorb acetone vapor are of particular interest since acetone is an important marker for biological processes. We present a simple procedure to synthesize acetone-responsive poly(methyl acrylate) brushes.

Quality of reporting of drug exposure in pharmacoepidemiological studies.

Purpose: Exposure definitions vary across pharmacoepidemiological studies. Therefore, transparent reporting of exposure definitions is important for interpretation of published study results. We aimed to assess the quality of reporting of exposure to identify where improvement may be needed.

Layer-by-Layer Printing of Photopolymers in 3D: How Weak is the Interface?

Additive manufacturing or, as also called, three-dimensional (3D) printing is considered as a game-changer in replacing traditional processing methods in numerous applications; yet, it has one intrinsic potential weakness related to bonding of layers formed during the printing process. Prior to finding solutions for improvement, a thorough quantitative understanding of the mechanical properties of the interface is needed. Here, a quantitative analysis of the nanomechanical properties in 3D printed photopolymers formed by digital light processing (DLP) stereolithography (SLA) is shown.

Printing "Smart" Inks of Redox-Responsive Organometallic Polymers on Microelectrode Arrays for Molecular Sensing.

Printing arrays of responsive spots for multiplexed sensing with electrochemical readout requires new molecules and precise, high-throughput deposition of active compounds on microelectrodes with spatial control. We have designed and developed new redox-responsive polymers, featuring a poly(ferrocenylsilane) (PFS) backbone and side groups with disulfide units, which allow an efficient and stable bonding to Au substrates, using sulfur-gold coupling chemistry in a "grafting-to" approach. The polymer molecules can be employed for area selective molecular sensing following their deposition by high-precision inkjet printing.

Amiodarone use and the risk of acute pancreatitis: Influence of different exposure definitions.

Purpose: The antiarrhythmic drug amiodarone has a long half-life of 60 days, which is often ignored in observational studies. This study aimed to investigate the impact of different exposure definitions on the association between amiodarone use and the risk of acute pancreatitis.

Method: Using data from the Dutch PHARMO Database Network, incident amiodarone users were compared to incident users of a different type of antiarrhythmic drug.

Early neonatal morbidities and neurological functioning of preterm infants 2 weeks after birth.

Objective: To determine the association between potential neonatal risk factors and the quality of general movements (GMs) in preterm infants.

Study Design: Prospective cohort study in 67 preterm infants. From video recordings made on Days 8 and 15, we scored the GMs as normal/abnormal and detailed aspects using the general movement optimality score (GMOS).

Poly(ferrocenylsilane) electrolytes as a gold nanoparticle foundry: "two-in-one" redox synthesis and electrosteric stabilization, and sensing applications.

Gold nanoparticles (AuNPs) coated with responsive polymers gained considerable interest due to their controllable size, good stability, and fast environmental response suitable for biological applications and sensing. Here we report on a simple and efficient method for the synthesis of stable and redox responsive AuNPs using organometallic polyelectrolytes in aqueous solutions of HAuCl. In the redox reaction, positively or negatively charged poly(ferrocenylsilanes) (PFS/PFS) served as reducing agents, and also as stabilizing polymers.

Hydrogels with a Memory: Dual-Responsive, Organometallic Poly(ionic liquid)s with Hysteretic Volume-Phase Transition.

We report on the synthesis and structure-property relations of a novel, dual-responsive organometallic poly(ionic liquid) (PIL), consisting of a poly(ferrocenylsilane) backbone of alternating redox-active, silane-bridged ferrocene units and tetraalkylphosphonium sulfonate moieties in the side groups. This PIL is redox responsive due to the presence of ferrocene in the backbone and also exhibits a lower critical solution temperature (LCST)-type thermal responsive behavior. The LCST phase transition originates from the interaction between water molecules and the ionic substituents and shows a concentration-dependent, tunable transition temperature in aqueous solution.

Highly Swellable, Dual-Responsive Hydrogels Based on PNIPAM and Redox Active Poly(ferrocenylsilane) Poly(ionic liquid)s: Synthesis, Structure, and Properties.

Highly swellable, dual-responsive hydrogels, consisting of thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) and redox-responsive poly(ferrocenylsilane) (PFS) based poly(ionic liquid)s (PILs) are formed by photo-polymerization. PFS chains bearing cross-linkable vinylimidazolium (VIm) side groups are copolymerized with NIPAM in aqueous solutions under ultraviolet light (λ = 365 nm) in the presence of a photoinitiator. The PFS-PILs serve as a macro-cross-linker and also provide redox responsiveness.

PEG stabilized DNA - poly(ferrocenylsilane) polyplexes for gene delivery.

Polycationic poly(ferrocenylsilane)s (PFS) with tunable amounts of PEG side chains were used for the condensation of DNA into polyplexes of 110 nm in 5.0 mM HEPES. The PFS-PEG/DNA polyplexes showed negligible aggregation, a strongly reduced protein adsorption, transfection activities comparable with linear polyethyleneimine and an excellent cytocompatibility.